| GENERAL |
| Built-In Functions |
Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Aerial Mode
-Jib or Wirecam Mode
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported |
| MECHANICAL & ELECTRICAL CHARACTERISTICS |
| Working Current |
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V) |
| Operating Temperature |
5° F ~ 120° F (-15° C ~ 50° C) |
| Weight |
Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg) |
| Gimbal Dimensions |
Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H) |
| PERIPHERAL |
| Camera Tray Dimensions |
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm |
| Accessory Power Connections |
12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1 |
| GCU Input Power |
4S Ronin-M Battery |
| Connections |
2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0 |
| PC Assistant Software Requirements |
Windows XP or above; Mac OS X 10.9 or above |
| Mobile Assistant Software Requirements |
iOS 7.1 or above; Android 4.3 or above |
| WORKING PERFORMANCE |
| Load Weight (Reference Value) |
10 lb (4.5 kg) |
| Angular Vibration Range |
± 0.02° |
| Maximum Controlled Rotation Speed |
Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s |
| Mechanical Endpoint Range |
Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110° |
| Controlled Rotation Range |
Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25° |