JVC Professional LCD Monitor

 Home

Model: DTV24G1

• 3G and Dual Link equipped
  SMPTE 424M/425M/372M

• JVC 10-bit video processing

• High operating viewing angle

• Waveform/Vector scope

• LTC & VITC support

• Gamma selection

• Various marker function

• Audio level meter up to 12ch

Product Code:dtv24g1

• 1920 x 1200 resolution
• Wide viewing angle 178°/178° with IPS panel
• 102% colour gamut
• 3G/dual link equipped
• Circuits that deliver low latency of less than one frame
• Waveform monitoring with over level function
• Vector scope with selectable size and position
• Advanced audio level meter up to 12 channels
• Exclusive JVC image processing technology
• LTC & VITC support
• Selectable gamma preset modes

• Wide selection of video production functions
• Easy-to-operate front panel controls
• Front LED dimmer function
• Source ID input by ASCII code (Red/Green/White colour linked with tally)
• Information position selectable
• 1:1 mode
• Gold-plated HD/SD SDI terminals with embedded audio,video and COMPONENT/RGB terminals
• DVI-D with HDCP terminal
• RS-232C, RS-485 remote
• Audio speaker built-in
• Rugged, adjustable stand provided

• 3G/Dual Link Equipped
  1080p uncompressed digital video
  data transmitted at a maximum
  rate of 60 frames per second at 3
  GB/second can be input with one
  HD SDI Input. Dual Link is available
  through two HD SDI inputs.
• IPS (In-Plane-Switching) LCD Panel
  IPS panels with wide viewing angles and low
  chromatic variation ensure minimal colour
  change from different viewing positions.
• Gamma Preset Mode
  JVC DTV24-G1 offers various pre-set gamma modes
  (2.2, 2.35, 2.45, 2.6) to meet your application needs.
• Advanced Audio Level Meter
  The DTV24 G1 channel number is displayed in each level bar. And, you can check the status of the audio signal at a glance for Reference Level/Over Level 0 dB, three set levels, and peak hold function.

• Vector Scope*
  DT V24 G1's High-quality vector scope allows simple checking of hue and saturation of digital video signals.Hue and saturation of colour signal are detected and displayed as a vector with resolution of 254 x 254.Compatible with video, component, SDI (SD/HD), DVI (except PC signals) input signals, and offers a double-size display** option and selection of display position or translucence functions.
• Waveform*
  DT-V24-G1 detects video, component (except RGB), SDI, DVI (except PC) brightness signals and displays them with resolution of 360 x 254 for SD signals or resolution of 480 x 254 for HD signals. Besides, it is alsopossible to perform checks at the colour signal level of each colour per screen for R/G/B, Y/PB/PR, Y/CB/CR. Over-level function enables peak brightness to be checked at a glance. The display allows a double-size display** option, and selection of display position or translucence functions.