|
Panasonic AJ-HD1200A |
 |
|||||||||||||||||
|
||||||||||||||||||
| Home > Panasonic > DVCPROHD > AJ-HD1200A |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| AJ-HD1200A [NTSC, PAL] Specifications |
| General | |
| Power Supply: | AC (100-240) V ±10%, 50 to 60 Hz |
| Power Consumption: | 97W |
| Operating Temperature: | 41 °F to 104 °F (5°C to 40°C) |
| Operating Humidity: | 10% to 85% (non dew) |
| Weight: | 18.1 lbs (8.2 kg) |
| Dimensions (WxHxD): | 8-1/2” x 5-3/16” x 16-15/16” (214 x 132 x 430 mm) |
| Recording Format: | DVCPRO HD-LP |
| Recording Video Signal: | 1080i/59.94Hz, 1080i/50Hz,
720p/59.94Hz (switchable) 720p/60Hz (Varicam) |
| Recording Audio Signal: | 48 kHz, 16 bit, 8 CH |
| Recording Track: | Digital Video:1080i/720p Digital Audio:8 channels TC:Subcode area Cue:1 longitudinal track CTL:1 longitudinal track |
| Tape Speed: | 67.64mm/s |
| Rec/Play Time: | Max. 64 minutes with AJ-HP64ELG |
| Tape: | 1/4” metal particle |
| FF/REW Time: | Approximately 2 minutes with AJ-HP64ELG |
| Video | |
| Sampling Frequency: | Y: 74.25/1.001 MHz, Pb/Pr: 37.125/1.001 MHz |
| Quantization: | 8 bits |
| Compression Method: | DCT + Adaptive quantization |
| Compression Ratio: | 1/6.7 |
| Error Correction: | Reed Solomonn Product Code |
| Bit Rate: | 100 Mbps |
| Audio | |
| Channel: | 8 channels |
| Sampling Frequency: | 48kHz |
| Quantization: | 16 bits |
| Frequency Response: | 20Hz to 20kHz, ±1.0dB (reference level) |
| Dynamic Range: | More than 85dB (1kHz, emphassis off, “A” weighted) |
| Distortion: | within 0.1% (1kHz, emphassis off, reference level) |
| Cross Talk: | Less than –80dB (1kHz, between any 2ch) |
| Wow & Flutter: | Below measurable limit |
| Headroom: | 20dB (AJ-HD1200AP) / 18dB (AJ-HD1200AE) |
| Video Input | |
| HD SDI (option*1): | BNC x 1, SMPTE 292M/296M |
| Reference (option*1): | BNC x 2 (loop-through), 75
On/OffSD (analog composite) /HD (tri level sync) Auto switching |
| Video Output | |
| HD SDI (option*1): | BNC x 2, SMPTE 292M/296M |
| SD SDI (option*1): | BNC x 1, SMPTE 259M-C |
| HD Component: | BNC x 3, Y/Pb/Pr, R/G/B switchable |
| SD Composite: | BNC x 2, Video1, Video2 (superimpose on/off) |
| Video Output Adjustment Range | |
| HD SDI: | (option*1) ±0.5H (±1100 Sample, 13.5ns step) |
| SD SDI Composite: | (option*1) ±0.5H (±858 Sample, 37ns step) |
| Compsite SC: | ±180° |
| Audio Input | |
| Analog (option*1): | XLR x 4 (CH1/2/3/4), +4/0/–20/–60
dBu (3k)
switchable, 600/high-impedance
switchable |
| HD SDI (option*1): | SMPTE 299M embedded audio (BNC x 1,
75)
|
| Audio Output | |
| Analog: | XLR x 4 (CH1/2/3/4), CH3/4
switchable for Monitor Out (L/R) +4/0/–20 dBu switchable, 600 /high-impedance
switchable |
| HD SDI (option*1): | SMPTE 299M embedded audio (BNC x 2,
75) |
| SD SDI (option*1): | SMPTE 275M-A embedded audio (BNC x
1, 75) |
| Phones: | M6, variable level control, 8 |
| Others | |
| DIGITAL (option*2): | 6 pin x 1, IEEE 1394, DVCPROHD, DVCPRO50/DVCPRO/DV |
| TC IN: | BNC x 1, 0.5 to 8.0 Vp-p, 10k
(option) |
| TC OUT: | BNC x 1, low-impedance, 2.0 ±0.5 Vp-p |
| Remoto Control: | D-sub 9 pin, for AJ-A95, RS-422A Interface |
| DC IN: | 4 pin x 1, DC12V |
| DC OUT: | DC12V, 250mA, for AJ-A95 |
| Option*1: AJ-YA120AG
HD-SDI Input/Output and SD-SDI Output Board Option*2: AJ-YAD120AG IEEE 1394 Interface Board |
|
| Weight and dimensions shown are approximate. Features and specifications are subject to change without notice. These products may be subject to export regulations. |