|
|
|
|
|
|
|
|
AZDEN APS 25-RL1 Powered Speaker System |
|
|
The APS 25-RL1 powered speaker system is a fully
self-contained wireless sound reinforcement system with a single infrared
wireless chest-worn transmitter.
Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a
5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear
detailed sound for all corporate, educational and commercial applications.
The APS 25 includes a Master Volume control and Tone control to reduce feedback.
Individual level controls for each of the four inputs- two wireless, one wired
mic level, and one line level-giving you more ways to configure your system. The
speaker's variable line level output lets you daisy chain multiple speakers. The
high gain mic input shorts automatically to reduce noise when no mic is plugged
in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio
input signal for hands-off system startup; a high impact case for reliability,
and dual-voltage(110/220V) switching to facilitate installation and use. The
speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the
bottom and side) or wall-mounted with the supplied U-mount bracket.
The APS 25-RL1 includes a APS-IRII infrared receiver module, an IRN-10
chest-worn transmitter with built-in emitter/mic and an IRD-30 external sensor.
Speaker Technical Specs:
Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) high efficiency - magnetically shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to 8kHz)
Wireless Inputs: 2 user-installable receivers
VHF (169-213 MHz) – 30 fixed frequencies
UHF (566.25-589.75 MHz) – 92 user-selectable frequencies
Infrared – 2 fixed frequencies
Wired Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable
Line-Out: +15dBv max - RCA jack
Weight: 8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
Compliance: UL, C-UL, and FCC approved
AC Power Requirements: User switchable, 110-125 / 210-240VAC - 50Hz/60Hz
Included w/speaker: Removable wall-mount bracket with 2 screws, rubber
anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid
pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how
many modules are installed
Receiver Technical Specs:
Sub-carrier frequencies: 2.06MHz or 2.56MHz
Type: super heterodyne - crystal controlled
Modulation: FM
Signal-to -Noise: >90dB
Image rejection: >40dB
Reception sensitivity: >25dBµV
Reception selectivity: ± 40kHz
Audio output adjustment: +4dB max
Audio output impedance: <1k ohms
Transmitter Technical Specs:
Sub-carrier frequencies: 2.06MHz & 2.56MHz switchable
Modulation: FM
Microphone element type: Uni-directional electret x 2
Frequency response: 50-9kHz ±3dB
Ext Mic input impedance: 2.2k ohms Ext Mic input jack: 3.5mm
Ext. Mic Voltage/Current: 3.5VDC @ 1mA (to power electret mic element)
Mic gain adjustment: +6dB to approx. –10dB
Battery type: 2-"AA" Alkaline (1.5V x 2) or
2-"AA" rechargeable Ni-MH (1.2V x 2)
Battery life: > 8hours w/alkaline batteries
Size: 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm)
Weight: 4.3oz (120g) -w/alkaline batteries |
 |
|
|
|
|
>
AZDEN >
AC and Battery Speakers
> APS 25-RL1
