Expandore-TASCAM mixer DS-M7.1

Cassette

130

202 MKIII

302 MKII

322

112 MKII

Workstation

SX-1

Multitrack

MMR-8

MX-2424

DS-D98

DA-78HR

RC-898

RC-828

RC-808

2488

424 MKIII

Porta-02 MkII

MF-P01

Pocketstudio 5

Mixers

AV-452

DM-24

DS-M7.1

TASCAM DJ

CD-X1500

CD-X1700

TT-M1

X-9

X-17

X-15

DAT

DA-45HR

DA-P1

CD-BT1

CD-GT1

CD-VT1

CC-222

CD-D1x4

CD-RW402

CD-RW2000

CD-A500

CD-A630

CD-A700

Converters

IF-TAD

Preamplifiers

LA-40 MkII

LA-80 / LA-81

Discontinued Models

CD-160

CD-450

CD-RW750

Cassette

102 MKII

122 MKIII

Multitrack

414 MKII

Converters

IF-AE8HR

IF-DA8

MA-AD8

Preamplifiers

MA-8

MH-40 MkII

MX-4

TASCAM DS-M7.1, DIGITAL SURROUND MONITOR CONTROLLER
	DS-M7.1 Digital Surround Monitor Controller
Main features
Standard 8 channel TDIF, AES/EBU and ADAT interfaces for connection with a stem recorder Standard TDIF interface for connection with console (AES/EBU and ADAT available on optional cards) 8 input channels / 8 output channels 44.1k, 48k, 88.2k, 96k sampling frequency operation 32 bit floating point processing Pull up/down operation via external master clock Flexible downmix from any surround format to a format using fewer channels 7.1 or 6.1 > 5.1, LR, Mono 5.1 > LCRS, 4.1, LR, Mono LCRS > LR, Mono LR > Mono Bass management for simulation of various consumer speaker systems Mute / Solo / Dimmer function Built-in Pink Noise Generator for easy calibration LED SPL display Individual channel Mute/Solo Individual channel delay compensation Input summing router Output router for track assignment of external devices Adjustable Dim, Mono switch and Alternate speakers switch Integrates with your existing console control room monitor output Standard AES/EBU insert for through-encoder monitoring (Analogue available on optional card) Analogue and AES/EBU surround monitor outputs Control panel can be removed from the main unit and be used from remote locations
Specifications
Digital Master Recorder input/output terminals
No. of channels	8 input, 8 output channels
AES/EBU	D-sub 25pin female, AES-1992 format
TDIF	D-sub 25pin female, TDIF-1 format
ADAT	TOS-link optical x2 (IN/OUT), ADAT optical format
Digital Console input/output terminals
No. of channels	8 input, 8 output channels
TDIF	D-sub 25pin female, TDIF-1 format
SLOT1	PCI 120pin Card edge, TASCAM TDMCS format, for optional interface cards

Digital Tracking Recorder input/output terminals
No. of channels	8 input, 8 output channels
TDIF	D-sub 25pin female, TDIF-1 format
SLOT2	PCI 120pin Card edge, TASCAM TDMCS format, for optional interface cards
Optional Interface cards
IF-AE/DM	AES/EBU interface Hi-sampling mode (Hi-speed only)
IF-AD/DM	ADAT interface (SYNC connector is not available)
IF-TD/DM	TDIF interface (REMOTE OUT connector is not available)
IF-AN/DM	Analogue interface (use with 20dB headroom) Hi-sampling mode
Note: Note: Only one IF-AN/DM (Analogue card) is available for SLOT1–3
Digital insert terminals
No. of channels	8 input, 8 output channels
AES/EBU	D-sub 25pin female, AES-1992 (AES/EBU) format
SLOT3	PCI 120pin Card edge, TASCAM TDMCS format, for optional interface cards
Monitor output terminals
No. of channels	8 output channels
ANALOG	D-sub 25pin female, balanced
Output impedance	<100 ohm
Nominal output level	+4dBu
Max. output level	+24dBu
DAC resolution	24 bits
AES/EBU	D-sub 25pin female, AES-1992 (AES/EBU) format
Stereo CR inputs
No. of channels	2 input channels
ANALOG	TRS jack x 2, balanced
Input impedance	>10k ohm
Nominal input level	+4 dBu
ADC resolution	24bit
Other input/output terminals
MUTE/DIM	Mini TRS jack (Tip: MUTE, Ring: DIMMER, Sleeve: GND), TTL level input (detects down edge of signals)
REMOTE IN 1	D-sub 9pin female
REMOTE IN 2	D-sub 9pin female
WORD IN	BNC, TTL level input with 75 ohm terminate switch
RS-232C (currently not supported)	D-sub 9pin male
Analogue audio output performance
Master recorder input (AES/EBU) ->Monitor output (Analogue)
Total harmonic distortion	<0.004%, 1kHz, 0dBFS input, fs=48kHz
Signal-to-noise ratio	>113dB, fs=48kHz, A-weighted
Dynamic range	>113dB, 1kHz, –60dBFS input, fs=48kHz, A-weighted
Frequency response	20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz20Hz – 40kHz +0.5/-1.5dB, 1kHz, 0dBFS input, fs=96kHz
Crosstalk	<–100dB, 1kHz, 0dBFS input, fs=48kHz
Master recorder input (AES/EBU) ->Analogue insert output (SLOT3: IF-AN/DM)
Total harmonic distortion	<0.006%, 1kHz, 0dBFS input, fs=48kHz
Signal-to-noise ratio	>111dB, fs=48kHz, A-weighted
Dynamic range	>111dB, 1kHz, –60dBFS input, fs=48kHz, A-weighted
Frequency response	20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz
	20Hz – 40kHz ±1.0dB, 1kHz, 0dBFS input, fs=96kHz
Crosstalk	<–100dB, 1kHz, 0dBFS input, fs=48kHz
Analogue audio input performance
CR input -> Monitor output (AES/EBU)
Total harmonic distortion	<0.003%, 1kHz +24dBu input, fs=48kHz
Signal-to-noise ratio	>113dB, fs=48kHz, A-weighted
Dynamic range	>113dB, 1kHz, –36dBu input, fs=48kHz, A-weighted
Frequency response	20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz
	20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz
Crosstalk	<–100dB, 1kHz, +24dBu input, fs=48kHz
Analogue insert input (SLOT3 : IF-AN/DM) ->Monitor output (AES/EBU)
Total harmonic distortion	<0.003%, 1kHz +24dBu input, fs=48kHz
Signal-to-noise ratio	>106dB, fs=48kHz, A-weighted
Dynamic range	>106dB, 1kHz, –36dBu input, fs=48kHz, A-weighted
Frequency response	20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz20Hz – 20kHz ±0.5dB, 1kHz, 0dBFS input, fs=48kHz
Crosstalk	<–100dB, 1kHz, +24dBu input, fs=48kHz
Power supply and other specifications
Power requirements	120V AC, 60Hz / 230V AC, 50Hz
Power consumption	32 W
Dimensions (W x H x D)	482mm x 148mm x 401mm (overall) 316mm x 38.6mm x 113mm (control panel)
Weight	8.65kg (main unit) 0.85kg (control panel)