General Description
Sennheiser understands that the more self-reliant a device is, the more artistic
freedom there is to enjoy. With this in mind, this new receiver has a built-in
Ethernet port for remote PC monitoring and setup with Sennheiser’s Wireless System Manager software. This receiver’s wireless sync function makes it a breeze to link up any G3 transmitter with the unit. In addition, it has a large backlit graphic display where receiver and transmitter information can be easily seen even on the darkest of stages.
Features- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 24 compatible frequencies
- Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems
- High-quality true diversity reception
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Automatic frequency scan feature searches for available frequencies
- Enhanced AF frequency range
- Wireless synchronization of transmitter parameter from receiver
- User-friendly menu operation with more control options
- Illuminated graphic display, receiver also shows transmitter settings
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Receiver shows transmitter battery indicatation in 4 steps
- Integrated Equalizer and Soundcheck mode
- Wide range of accessories adapts the system to any requirement
Delivery Includes- 1 EM 300 G3 rack-mount receiver
- 1 GA 3 rack mount
- 1 NT 2 power supply unit
- 2 antennas
- Operating instructions
Technical Data
| RF frequency range |
516..... 865 MHz |
| Transmission/receiving frequencies |
1680 |
| Presets |
max 24 |
| Switching bandwidth |
42 MHz |
| Peak deviation |
+/- 48 kHz |
| Compander |
HDX |
| Frequency response (microphone) |
25.....18000 Hz |
| Signal-to-noise ratio |
> 115 dB(A) |
| THD, total harmonic distortion |
< 0,9 % |
| In compliance with |
ETS 300422 , ETS 300445 , CE , FCC |
| Antenna connector |
2 BNC, 50 Ohm |
| Audio-XLR connector |
XLR / 6,3 mm jack |
| Audio output level (balanced) |
XLR: +18 dBu max |
| Audio output level (unbalanced) |
Jack: +12 dBu max |
| Dimensions (Receiver) |
212 x 202 x 43 mm |
| Weight (Receiver) |
980 g |
|
