Features
Superior Picture Quality
The SNC-DF70P Series incorporates a 1/4-type Super HADTM CCD that achieves high horizontal resolution of 480 TV lines (analogue video output) and high sensitivity. The CCD imager provides a minimum illumination of 0.9 lx at F1.0, enabling capture of clear images even under low light conditions.
High Frame Rate up to 30 fps at QVGA resolution
The SNC-DF70P supports both the MPEG-4 and JPEG compression formats. The high compression ratio of MPEG-4 provides smooth moving images over networks even when bandwidth is limited. If higher quality, still images are preferred, then the industry standard JPEG compression format is selectable from the setup menu. The SNC-DF70P supports variable bit rates up to 2 Mb/s. Image size can be selected from six modes: 640 x 480, 480 x 360, 384 x 288, 320 x 240, 256 x 192, and 160 x 120.
High Frame Rate
The SNC-DF70P produces images at a maximum frame rate of 25fps*1 when the image size is 320 x 240 in both MPEG-4 and JPEG modes, producing clear and smooth moving images. *1: In order to view images at the maximum frame rate, adequate PC processing power and network bandwidth are required.
Analogue Composite Video Output
The SNC-DF Series is equipped with an analogue composite video output, allowing camera images to be directly recorded or monitored by connecting video equipment such as time-lapse recorders, hard disk recorders, and monitors.

Benefits
Motion Detection/Alarm Trigger
The SNC-DF40P is equipped with a built-in motion detection function that can generate an alarm through its alarm-output port or trigger another device to perform a variety of actions. The motion detection function uses vector information to detect motion so that unwanted noise components do not accidentally trigger the alarm. In addition, the SNC-DF Series is equipped with a sensor-input port that can receive a trigger from an external sensor.
Pre-/Post-Alarm Image Storage
With a built-in buffer memory, the SNC-DF Series can store several seconds of pre-alarm and post-alarm still images when the motion detection function, the alarm input or both trigger an alarm.
Image Transfer Using FTP/SMTP
All of the pre-/post-alarm images stored at the time of an alarm event can be transferred to an FTP server for later viewing. In addition, the still image captured at the time of an alarm event can be sent to a designated e-mail address.
Analogue Composite Video Output
The SNC-DF Series is equipped with an analogue composite video output, allowing camera images to be directly recorded or monitored by connecting video equipment such as time-lapse recorders, hard disk recorders, and monitors.
Single Cable operation for easy installation
The SNC-DF40P offers a choice of three different power supplies. AC 24 V or DC 12 V can be supplied through the standard power terminal while Power-over-Ethernet simplifies installation by reducing the need for additional cables for power.