|
|
|
Optocore Fiber and CAT5 Interfaces |
|
|
V3R-FX-INTERCOM and X6R-FX-INTERCOM 1RU
interfaces from Optocore provide 4 and 8 port fiber respectively or CAT5 “SANE”
ring connectivity allowing intercom to travel over the Optocore Audio network.
These units also provide solutions for fiber muxing remote panels and interfaces
to and from the Eclipse matrix. As part of a greater Optocore audio network they
can also feed and receive program and IFB audio around the ring. The Optocore
units also provide a redundant LAN for IP panels and/or PC Management from
anywhere on the ring.
OPTOCORE FOR REAL-TIME SIGNAL ROUTING
The V3R-FX-INTERCOM FOR CLEARCOM and X6R-FX-INTERCOM FOR CLEAR-COM devices
provide high bandwidth routing capabilities for each intercom port, at a rate of
2Gbit/s of data for up to 1024 audio/intercom input channels and various types
of analog or digital audio interfaces. IP-based Clear-Com systems can be
tunneled through Optocore with the use of LAN ports of each device.
OPTOCORE AS A MATRIX AND FIBER BACKBONE
Optocore can work as a digital audio router and fiber backbone for the Clear-Com
system, offering both dual fiber ring redundancy and CAT5 based SANE audio
network.
OPTOCORE INTEGRATES CLEAR-COM SYSTEMS
The Optocore interfaces can fully integrate Clear-Com matrix intercom systems to
Optocore. It is possible to output each single intercom channel at every
Optocore interface, and use the analog 4-wire, AES/EBU or MADI output devices to
distribute the communication. The X6R-FX-INTERCOM is equipped with eight
intercom I/O’s and the V3RFX-INTERCOM with four. It is possible to run the
intercom communication over an Optocore system and send an analog output or
console mix-minus to an intercom IFB using for example the DD2FR-FX MADI
interface.
Features
-
Purpose-Designed
for Professional Productions:
High signal integrity and guaranteed quality of service (QoS).
-
Ultra Low Latency:
Unique synchronous design delivers a fixed at 41.6 μs from
any point in the network to any other point, regardless of
the number of nodes on the network.
-
High Reliability:
Fiber and CAT5 ring redundancy together with automatic Word
Clock negotiation and dual power supplies provide a reliable
and futureproof solution.
-
High Bandwidth:
2Gbit/s data rate supports 1024 input channels on Optocore
Fiber; 64 channels in SANE network; 32 bit audio transport.
-
Clear-Com
Compatible for Ease of Use:
Built-in Clear-Com compatible connections using standard
CAT5 cables.
-
Easy to Operate:
Extensive software control and monitoring capabilities makes
it easy to supervise the entire network, change settings,
display levels, and log events.
-
High Scalability:
Simply add devices for new functionality or a higher channel
count as production needs grow.
|
Product Code: FIM202D
 |
THE OPTOCORE AND SANE
PLATFORMS
V3R-FX-INTERCOM and X6R-FX-INTERCOM are based on the
market-proven Optocore™ and SANE™ (Synchronous Audio Network
plus Ethernet) technology platforms. The Optocore dual,
redundant fiber-ring-based network can transport up to 1024
channels of 48 kHz sampled digital audio, or can be reallocated
to route data and video signals simultaneously with
multi-directional audio. The SANE platform is based on CAT5
cabling, which carries up to 64 channels of very low latency
digital audio and 100Mbit Ethernet.
By using a ring topology, SANE is fault tolerant like the
Optocore fiber-based solution and supports up to 24 interface
nodes. Optocore and SANE together enables the V3R-FXINTERCOM and
X6R-FX-INTERCOM devices to deliver a highly reliable, flexible
and cost effective solution for broadcast and live performance
productions. The devices seamlessly integrate intelligent
intercom systems—for a production of any size and across any
number of locations—with the other analog or digital audio, data
and/or video signals over common fully redundant fiber and CAT5
cables.
|
|
|
|
|
|
