|
|
|
2-Port Matrix
frame to/from panel or module fiber interface (Dual fiber run.) |
|
|
The FIM-202D is an optical fiber interface for
use with Eclipse Digital Matrix and Matrix Plus3 intercom systems. Each pair of
FIM-202D fiber interfaces allow one or two digital matrix intercom panels or
interface modules to be remotely connected to the matrix card frame via optical
fibre.
This transmission capability allows a set of panels to be located remotely from
the matrix frame using existing fiber cabling or can be used to temporarily
locate panels via fiber in live event production applications. Panels may be
connected to the matrix frame at fiber lengths of up to 12 miles (20 km) when
used with single mode fiber. The use of fiber for long runs eliminates all types
of electromagnetic and RF interference to the signal and provides an intrusion
secure link.
Features
-
Remotely
locates one or two digital matrix panels or interface models
over fiber
-
24-bit
digital DEMUX
-
48kHz audio
sampling rate
-
Sends and
receives RS-422 control data
-
Flat
frequency response up to 20kHz, S/N >80dB
-
Up to 20km
(12 miles) range with fiber using single mode
-
Up to 5km (3
miles) using multi mode fiber
-
Works in
demanding environmental conditions
-
RJ-45
connectors for direct connection with matrix panels, frames
and interfaces
-
Can be used
to extend any line level 4-wire audio signal / RS-422 signal
|
Product Code: FIM202D
 |
|
|
Technical Details |
Electrical & Mechanical Specifications
The FIM-202D can operate in
demanding conditions, over a temperature range of -40 degrees to +65
degrees Centigrade and with
humidity range of 0% to 95%, non-condensing.
Input Voltage range: 9-18 Vdc
Power Consumption: < 5 Watts (at 13.8V per end, all channels at full
level) |
|
|
