|
|
| 12 Lever Key
Master Intercom Assignment Panel |
|
|
The powerful ICS-2003E is a 12-key Master
Intercom Panel with a large, informative display screen and a keypad for
programming, IFBs, party-lines, DTMF dialing and direct access to any panel or
port in a single matrix. |
Product Code: ICS2003
 |
|
|
Technical Details |
Technical Specification
FRONT-PANEL CONTROLS AND CONNECTORS
Talk/Listen Switches: 12
Function Buttons: 16
Answer Back Switch: 1
Volume Controls: 2
Headset Connector: 1 D4M XLR
Panel Mic Connector: 1 1/4 in. Phone Jack
REAR-PANEL CONNECTORS
Miscellaneous: DB-15F
To Matrix: RJ-45 & DB-15M
Audio IO (OPT-100): DB-15F
Accessory: DB-9F
DC Power: 5 Pin
PANEL MICROPHONE INPUT
Type: Electret
Input Level: 40 dBu
Gain Adjustment Range: +/-5dB
Impedance: 200 Ohms
HEADSET MICROPHONE INPUT
Type: Dynamic
Input Level: -55dBu
Gain Adjustment Range: +/- 5dB
Impedance: 200 Ohms
LOCAL PROGRAM INPUT
Type: Transformer Isolated
Impedance: 8k Ohms Bridging
Level: 0 dBu will produce full output of speaker when volume control
is fully clockwise
HEADPHONE OUTPUTS
Impedance: 50 to 600 Ohms
Power: 1/2 W into 50 Ohms
SPEAKER AMPLIFIER OUTPUT
Impedance: 8 Ohms
Power: 2 W
LINE INPUT (2-PAIR LISTEN FROM MATRIX)
Type: Transformer Balanced
Impedance: 8k Ohms Bridging
Level: 0 dBu nominal
Freq. Resp.: 100 Hz to 15 kHz +/- 2 dB
LINE OUTPUT (2-PAIR TALK TO MATRIX)
Type: Transformer Balanced
Impedance: 150 Ohms (when talk active)
Level: 0 dBu nominal
Freq. Resp.: 100 Hz to 15 kHz, +/- 2 dB
LOGIC INPUT #1
Type: 5 V logic with pull-up resistor
Logic: True = Short to Ground
LOGIC INPUT #2
Type: 5 V logic with pull-up resistor
Logic: True = Short to Ground
MUTE RELAY
Contact Type: 1 pair SPDT (single form C)
Contact Voltage Rating: 24 VDC
Contact Current Rating: 1 Amp continuous, 2 Amps peak at 24 VDC
PANEL RELAY
Contact Type: 1 pair SPDT (single form C)
Contact Voltage Rating: 24 VDC
Contact Current Rating: 1 Amp continuous, 2 Amps peak at 24 VDC
HEADPHONE OUTPUTS
Impedance: 50 to 600 Ohms
Power: 1/2 W into 50 Ohms
SPEAKER AMPLIFIER OUTPUT
Impedance: 8 Ohms
Power: 2 W
LINE INPUT (2-PAIR LISTEN FROM MATRIX)
Type: Transformer Balanced
Impedance: 8k Ohms Bridging
Level: 0 dBu nominal
Freq. Resp.: 100 Hz to 15 kHz +/- 2 dB
LINE OUTPUT (2-PAIR TALK TO MATRIX)
Type: Transformer Balanced
Impedance: 150 Ohms (when talk active)
Level: 0 dBu nominal
Freq. Resp.: 100 Hz to 15 kHz, +/- 2 dB
LOGIC INPUT #1
Type: 5 V logic with pull-up resistor
Logic: True = Short to Ground
LOGIC INPUT #2
Type: 5 V logic with pull-up resistor
Logic: True = Short to Ground
MUTE RELAY
Contact Type: 1 pair SPDT (single form C)
Contact Voltage Rating: 24 VDC
Contact Current Rating: 1 Amp continuous, 2 Amps peak at 24 VDC
PANEL RELAY
Contact Type: 1 pair SPDT (single form C)
Contact Voltage Rating: 24 VDC
Contact Current Rating: 1 Amp continuous, 2 Amps peak at 24 VDC |
|
|
