Panasonic 16x9 Lens AG-7200G, AGLA7200G, AGLA7200

Panasonic 16:9 Conversion Lens

Model AG-LA7200G

Operating Instructions

This product is a conversion lens that is capable of shooting images with an aspect ratio of 16:9, which is wider than usual lenses.

The horizontal aspect of each images is optically compressed and recorder on the tape.

When output to a wide screen monitor TV, the recorded images can be displayed at an aspect ratio of 16:9.

Mounting the lens

Remove the lens cap from the cameras,
Loosen the screw on the side of the lens hood, then remove the lens hood from the camera.

3. Remove the front and rear caps from the conversion lens

4. Lightly tighten the screw on the side of the conversion lens.

(Tighten as far as it will go, but do not force it any further.)

5. Attach the conversion lens to the camera by turning it in the direction of arrow A

If it is necessary to adjust the angle of attachment, loosen the screw on the side of the conversion lens and turn the lens in the direction of arrow. When the lens is at the desired angle, tighten the screw.

Specifications

Lens mount diameter: 2 7/8 inches ( 72mm)

Frontal dimensions ( W x H) 4 13/16 x 4 3/8 inches ( 122 x 110mm)

Total length : 2 1/2 inches ( 62mm )

Weight : Approx. 0.902 Ib ( 410g)

Panasonic 010406

Another Search by Google or Yahoo
Expandore Singapore India Vietnam Dealer Distributor PAL

Expandore Singapore AGLA7200 AGLA7200G

	Mounting the lens
	Remove the lens cap from the cameras, Loosen the screw on the side of the lens hood, then remove the lens hood from the camera.

	3. Remove the front and rear caps from the conversion lens 4. Lightly tighten the screw on the side of the conversion lens. (Tighten as far as it will go, but do not force it any further.)

	5. Attach the conversion lens to the camera by turning it in the direction of arrow A If it is necessary to adjust the angle of attachment, loosen the screw on the side of the conversion lens and turn the lens in the direction of arrow. When the lens is at the desired angle, tighten the screw.