|
DT-V20L3G 20” Multi-Format LCD Monitor
(Discontinued) |
|
Model: DTV20L3G
(Discontinued)
-
3G and Dual Link
equipped
SMPTE 424M/425M/372M
-
JVC 10-bit video
processing
-
High operating
viewing angle
-
Waveform/Vector
scope
-
LTC & VITC
support
-
Gamma selection
-
Various marker
function
-
Audio level meter
up to 12ch
|
Product Code:DTV20L3G
 |
|
|
|
DT-V20L3G Features |
- 1680 x 1050 resolution
- Wide viewing angle 178°/178°
with IPS panel
- 3G/dual link equipped
- Circuits that deliver low
latency of less than one frame
- Waveform monitoring with over
level function
- Vector scope with selectable
size and position
- Advanced audio level meter up
to 12 channels
- Exclusive JVC image
processing technology
- LTC & VITC support
- Selectable gamma preset modes
|
- Wide selection of video
production functions
- Easy-to-operate front panel
controls
- Front LED dimmer function
- Source ID input by ASCII code
(Red/Green/White colour linked with tally)
- Information position
selectable
- 1:1 mode
- Gold-plated HD/SD SDI
terminals with embedded audio
- DVI-D with HDCP terminal
- RS-232C, RS-485 remote
- Audio speaker built-in
- Rugged, adjustable stand
provided
|
|
DT-V20L3G Highlights |
- 3G/Dual Link
Equipped
1080p uncompressed digital video
data transmitted at a maximum
rate of 60 frames per second at 3
GB/second can be input with one
HD SDI Input. Dual Link is available
through two HD SDI inputs.
- IPS
(In-Plane-Switching) LCD Panel
IPS panels with wide viewing angles and low
chromatic variation ensure minimal colour
change from different viewing positions.
- Gamma Preset
Mode
JVC offers various pre-set gamma
modes
(2.2, 2.35, 2.45, 2.6) to meet your application needs.
- Advanced Audio
Level Meter
The DT V20L 3G channel
number is displayed in each level bar. And, you can check the
status of the audio signal at a glance for Reference Level/Over
Level 0 dB, three set levels, and peak hold function.
|
- Vector Scope*
DTV20L 3G's
High-quality vector scope allows
simple checking of hue and
saturation of digital video signals. Hue and saturation of colour signal
are detected and displayed as
a vector with resolution of 254 x 254.Compatible with video,
component, SDI (SD/HD), DVI
(except PC signals) input signals, and offers a double-size display** option
and selection of display position or translucence functions.
- Waveform*
DT V20L3G
detects video, component (except RGB), SDI, DVI (except PC)
brightness signals and displays them with resolution of 360 x
254 for SD signals or resolution of 480 x 254 for HD signals.
Besides, it is alsopossible to perform checks at the colour
signal level of each colour per screen for R/G/B, Y/PB/PR,
Y/CB/CR. Over-level function enables peak brightness to be
checked at a glance. The display allows a double-size display**
option, and selection of display position or translucence
functions.
|
|
|
|
DT-V20L3G Specifications |
|
Model |
|
DT-V20L 3G |
|
Type |
|
Multi format LCD monitor |
|
Screen Size |
|
Type 20 wide format |
|
Aspect Ratio |
|
16:10 |
|
LCD Panel |
|
20" wide,active matrix TFT |
Effective Screen Size
(W
x H) |
|
433.4 x 270.9 mm (17-1/8" x
10-3/4") |
|
Pixels |
|
1680 x 1050 |
|
Display Colors |
|
16.77 million |
|
Viewing Angle |
Horizontal |
178° |
|
Vertical |
178° |
|
Brightness |
|
470 cd/m2 |
|
Contrast Ratio |
|
700: 1 |
|
Response Time (G to G) |
|
6 ms (TYP) |
|
Horizontal/Vertical |
Horizontal |
31.469 kHz to 75.000 kHz |
|
Frequency (PC signals) |
Vertical |
48 Hz - 65 Hz |
|
|
Depending on the signal
within the range of these
frequencies, some signals may
not be displayable in which case, "Out of range " is
shown. |
|
Applicable Standard
|
|
3G SDI (Ready) :
SMPTE424M/SMPTE425M |
|
DUAL LINK HD SDI: SMPTE372M |
|
HD SDI: BTA S-004C, SMPTE292M |
|
SD SDI: ITU-R BT.656:
525/625, SMPTE259M: 525 |
|
EMBEDDED AUDIO: SMPTE299M,
SMPTE272M |
|
Audio Output |
|
Internal speaker: 1.0 W + 1.0
W |
|
Operating Conditions |
Operating temperature |
5°C to 35°C (41°F to 95°F) |
|
Operating humidity |
20% to 80% (non condensing) |
|
Storage temperature |
-20°C to 60°C |
|
Power Requirements |
|
AC 120/220-240 V, 50/60 Hz |
|
Rated Current |
|
1.00 A (AC 120 V) / 0.60 A
(AC 220 – 240 V) |
|
Dimensions (WxHxD) |
With desktop stand |
477 x 394.6 x 243 mm (18-7/8"
x 15-5/8" x 9-5/8") |
|
(excluding protrusions) |
Without stand |
477 x 354 x 99 mm (18-7/8" x
14" x 4") |
|
Weight |
Including stand |
10.6 kg (23.3 lbs.) |
|
Excluding stand |
7.7 kg (16.9 lbs.) |
|
Provided Accessories |
|
AC power cord, power cord
holder x 1, |
|
|
screw x 2 ( for power cord
holder) |
|
INPUT/OUTPUT
TERMINALS |
|
Video |
VIDEO (INPUT 1) |
Input/output of composite
signal: |
|
2 line, BNC connector x 4, 1
V(p-p), 75 |
|
VIDEO (INPUT 2) |
* The input (IN) and output
(OUT) terminals are bridgeconnected (auto termination). |
|
DVI-D (HDCP) |
DVI-D signal input
(compatible with HDCP): |
|
DVI-D connector x 1
(compatible with DDC2B) |
|
COMPO./RGB |
Input/output of analog
component signal/analog RGB signal: |
|
(GY, B/PB/B-Y, R/PR/R-Y) |
1 line, BNC connector x 6 |
|
G/Y: 1 V(p-p), 75
(including sync signal) |
|
B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p),
75 |
|
* The input (IN) and output
(OUT) terminals are bridgeconnected (auto termination) |
|
EXT.SYNC (CS) |
Input/output of composite
sync signal: 1 line, BNC connector x 2, |
|
0.3 V(p-p) – 4 V(p-p), 75
(tri-level sync,
negative polarity sync
(bi-level), and BB) (including no video signal) |
|
* The input (IN) and output
(OUT) terminals are bridgeconnected (auto termination) |
|
Audio |
E. AUDIO HD/SD SDI (IN 1) |
Digital signal input
(compatible with EMBEDDED AUDIO/ |
|
E. AUDIO HD/SD SDI (IN 2) |
DUAL LINK signals): auto
detection, 2 line, BNC connector x 2 |
|
E. AUDIO HD/SD SDI |
Digital signal output
(compatible with EMBEDDED AUDIO signals): |
|
(SWITCHED OUT) |
1 line switched out, BNC
connector x 1 |
|
AUDIO ASSIGN (IN1) |
Analog audio signal input: |
|
AUDIO ASSIGN (IN2) |
2 line, RCA connector x 4,
500 mV (rms), high impedance |
|
AUDIO ASSIGN (MONITOR OUT) |
Analog audio signal output: 1
line, RCA connector x 2, 500 mV (rms) |
|
External Control |
REMOTE (MAKE/TRIGGER) |
RJ-45 x1 (8-pin) |
|
REMOTE (RS-485) |
RJ-45 x2 (IN/OUT) (8-pin) |
|
REMOTE (RS-232C) |
D-sub(9-pin) x1 |
|
 |
|
|
