- 1366 x 768 resolution
- Wide viewing angle 178°/178°
with IPS panel
- 3G/Dual Link support
- Circuits that deliver low
latency of less than one frame
- AC/DC operation
- Waveform monitoring with over
level function
- Vector scope with selectable
size and position
- Advanced audio level meter up
to 12 channels
- Exclusive JVC image
processing technology
- LTC & VITC support
- Selectable gamma preset modes
|
- Wide selection of video
production functions
- Easy-to-operate front panel
controls
- Front LED dimmer function
- Source ID input by ASCII code
(Red/Green/White colour linked with tally)
- Information position
selectable
- 1:1 mode
- Gold-plated HD/SD SDI
terminals with embedded audio
- DVI-D with HDCP terminal
- RS-232C, RS-485 remote
- Audio speaker built-in
- Rugged, adjustable stand
provided
|
- 3G/Dual Link
Equipped
1080p uncompressed digital video
data transmitted at a maximum
rate of 60 frames per second at 3
GB/second can be input with one
HD SDI Input. Dual Link is available
through two HD SDI inputs.
- IPS
(In-Plane-Switching) LCD Panel
IPS panels with wide viewing angles and low
chromatic variation ensure minimal colour
change from different viewing positions.
- Gamma Preset
Mode
JVC DTV-17-G1 offers various pre-set gamma
modes
(2.2, 2.35, 2.45, 2.6) to meet your application needs.
- Advanced Audio
Level Meter
The DTV 17 G1 channel
number is displayed in each level bar. And, you can check the
status of the audio signal at a glance for Reference Level/Over
Level 0 dB, three set levels, and peak hold function.
|
- Vector Scope*
DT V17 G1's
High-quality vector scope allows
simple checking of hue and
saturation of digital video signals.Hue and saturation of colour signal
are detected and displayed as
a vector with resolution of 254 x 254.Compatible with video,
component, SDI (SD/HD), DVI
(except PC signals) input signals, and offers a double-size display** option
and selection of display position or translucence functions.
- Waveform*
DT-V17-G1 detects video, component (except RGB), SDI, DVI (except PC)
brightness signals and displays them with resolution of 360 x
254 for SD signals or resolution of 480 x 254 for HD signals.
Besides, it is alsopossible to perform checks at the colour
signal level of each colour per screen for R/G/B, Y/PB/PR,
Y/CB/CR. Over-level function enables peak brightness to be
checked at a glance. The display allows a double-size display**
option, and selection of display position or translucence
functions.
|
