Panasonic WJ-GXE500 | WJGXE500 | WJ GXE500 Video Encoder

Panasonic WJ-GXE500
Product Code : WJ-GXE500	· Up to 4 analog cameras can be connected · H.264, MPEG-4 and JPEG dual stream output at VGA or D1 image size with up to 30 ips · Progressive output · Bi-directional audio (1CH) · Power over Ethernet (PoE) IEEE 802.3af
Features of WJ GXE500

· Full frame H.264 transmission for each 4 channels
· Dual streams of H.264 (High profile) and JPEG at VGA / D1 image size
· Motion adaptive interlace/progressive conversion allows every frame to be clear even when the subject is moving.
· Compensates the picture degration caused by long-distance cable maintaining clear picture
· Coaxial communication ensures the control of Panasonic PTZ cameras via coaxial cable.
· Open command conversion table for RS-485 ensures the control of various manufacture’s PTZ camera.
· SD/SDHC Memory card slot for manual recording, alarm recording, and backup upon network failure (JPEG)
· Camera title display: Up to 16 alphanumeric characters embedded in the image
· Full duplex bi-directional audio allows interactive communication.
· PoE. The power will be supplied by simply connecting a LAN cable. (IEEE802.3af compliant)
· Small size. And can be installed into the rack with mounting brackets. (Option)
· Alarm sources including 3 terminal input, VMD, camera site alarm, video loss, and Panasonic alarm
· VMD (Video Motion Detector) with 4 programmable detection areas
· Face detection detect the position of human face, the information is sent by XML or video stream. (Ch1 only)
· Meta data for VMD is supplied to work with the WJ-ND400 playback VMD function.
· Internet mode: H.264/MPEG-4 images can be transmitted by over HTTP protocol.
· Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL) / English, French (NTSC)
Installation required except for English
· IPv4/IPv6 protocol supported

Specifications of WJGXE500

Audio/Video IF:
Video Input	4x 1.0 V [p-p] / 75 Ω PAL composite video inputs (BNC) Multiplexed control data and cable compensation compatible: 1 ~ 4 CH
Microphone/Line Input	MIC IN and Line IN are selectable. ø3.5 mm stereo mini jack (monaural input) (Applicable microphone: Plug-in power type) Supply voltage: 2.5 V ±0.5 V Input impedance: approx. 2 kΩ
Audio Output	ø3.5 mm stereo mini jack (monaural output) Line level
Browser GUI Specifications:
Camera Control	Pan / tilt / zoom / focus / preset positions / auto focus (When using Panasonic P/T/Z cameras)
Display Mode	Spot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens (JPEG only). 20 characters camera title available.
Unit Title	Up to 20 characters
Camera Title (OSD)	Up to 16 characters On/Off
Clock Display	Time: 12H / 24H, Date: 5 formats on the browser, Summer time (Manual)
Alarm Control	Reset
One Shot Capture	A still picture is displayed on a newly opened window.
Audio	Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High, Audio Output: ON / OFF Volume adjustment: Low / Middle / High
SD Memory Data Download	Still or motion Images recorded in the SDHC/SD memory card can be downloaded
GUI / Setup Menu Language	English, French, Italian, Spanish, German, Russian (Installation required except for English)
System Log	Up to 100 (Internal), Up to 4,000 (SDHC/SD memory when the recording format is set to JPEG.) error logs
Supported OS	Microsoft® Windows® 7 Professional 64 bit/32 bit, Microsoft® Windows Vista® Business SP1 32 bit, Microsoft® Windows® XP Professional SP3 The language of the OS must be same as selected GUI language.
Supported Browser	Windows® Internet Explorer® 8.0 32 bit (Microsoft® Windows® 7 64 bit/32 bit), Windows® Internet Explorer® 7.0 (Microsoft® Windows Vista® Business SP1 32 bit), Microsoft® Internet Explorer® 6.0 SP3 (Microsoft® Windows® XP Professional SP3)
Network Specifications:
Network IF	10Base-T / 100Base-TX, RJ45 connector
Image Resolution	VGA mode: VGA (640 x 480) / QVGA (320 x 240) D1 mode: D1 (720 x 576)
*H.264 / MPEG-41**
Transmission Mode	Constant bit rate / Frame rate priority
Frame Rate	1 / 3.1 / 4.2 / 6.25 / 8.3 / 12.5 / 20 / 25 fps
Bit Rate/Client	64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps / Unlimited
Image Quality	LOW / NORMAL / FINE
Refresh Interval	0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s
Transmission Type	UNICAST / MULTICAST
JPEG
Image Quality	10 steps
Refresh Interval	0.08 fps ~ 25 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264/MPEG-4 images.)
Transmission Type	PULL / PUSH
Audio Compression	G.726 (ADPCM) 32 kbps / 16 kbps, CH1 only
Audio mode	OFF / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Authentication for Audio	Level 1 only / Level 2 higher / All users
Total Bit Rate	64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol	IPv6: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DNS, NTP, SNMP IPv4: TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
FTP Client	Periodic image transfer, Alarm image transfer (When the FTP transmission is failed, backup on an optional SDHC/SD memory card is available.)
No. of Simultaneous Users	Up to 16 users (Depends on network conditions)
SDHD/SD Memory Card (Option)	*Alarm REC / Backup upon network failure / Manual REC (JPEG only) Compatible SD (SDHC) card: Panasonic 256 MB, 512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB* model * SDHC card**
Face Detection	ON / OFF (with XML notification) (Ch1 only)
Alarm Specifications:
Alarm Source	3 terminal input, VMD, Command alarm, Camera site alarm, Video loss alarm
Alarm Actions	SDHC/SD memory recording, E-mail notification, Alarm terminal output, Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log	With SDHC/SD memory card: 5,000 logs, without SDHC/SD memory card: 1,000 logs
Input / Output Specifications:
Terminal	Terminal 1: Alarm input, Terminal 2: Alarm input/Alarm output, Terminal 3: Alarm input/Alarm output/AUX output
RS-485 Port	1x RS-485 (RJ-11, 4 wire / 2 wire, Full/Half duplex. Open command conversion table for Other manufactuer&s PTZ camera)
General Specifications:
Safety/EMC Standard	CE (EN55022 ClassB, EN55024)
Power Source and Power Consumption	12 V DC: 500 mA, PoE (IEEE802.3af): 6 W (Class 0 device)
Operating Temperature	–10 °C ~ +50 °C (14 °F ~ 122 °F)
Operating Humidity	90 % or less (without condensation)
Dimensions	140 mm (W) x 44 mm (H) x 185 mm (D) (5-1/2" x 1-3/4" x 7-9/32") (excluding rubber feet and projections)
Weight	1.0 kg (2.21 lbs.)

Expandore Singapore India Vietnam

Home > Articles

View our Blogs

Video Blogs	Audio Blogs	Intercom Blogs	Lighting Blogs

Read our blogs