|
Panasonic
WV-ASM100
|
|
Product Code : WV-ASM100
|
• Supported recorders: WJ-ND400 Series, WJ-ND300 Series,
WJ-ND200 Series, WJ-HD716/616, WJ-HD300A Series, WJ-RT416
Series
• Up to
100 recorders, 64 encoders and 256 directly connected cameras can
be registered
• Up to
16x 30 ips/camera images can be displayed in H.264 1.5 Mbps mode or
MPEG-4 2 Mbps mode
|
| Features of
WV ASM100 |
•
Up to 100 recorders,
64 encoders and 256 directly connected cameras can be registered.
Up to 6,400 cameras registered in the recorders and 256 cameras
registered in the encoders are automatically registered in the
WVASM100 (the number of the cameras depends on the recorder and
encoder).
•
Live images can be
received directly from the camera/encoder or via the recorder
enabling flexible network design.
•
Multi-Monitor
option enables simultaneous use of Operation Display (1 / 4 / 9 /
16 split), Live Display (1 / 4 / 9 / 16 split) and Map Display each
on a dedicated monitor. Single or two monitor operation is also
available. A total of 20 screens can be displayed with the
simultaneous use of the Operation Display and the Live Display at a
time.*1
•
Up to 30 ips/camera
can be displayed in 16 split-screen in MPEG-4 2 Mbps mode
(depending on the camera and camera setup).
•
Up to
400 camera groups: Cameras and multiscreen mode for the Operation
Display can be programmed and called up by manual or sequence
operation.
•
Image resolution
dynamically changes depending on the screen mode: VGA for Quad
screen, QVGA for 16 split screen, enabling optimum network usage
(depending on the camera model).
•
Panasonic
camera control: Pan/Tilt, Zoom, Focus, Brightness, Preset position
call and program (up to 256), Auto mode, AUX 1 ~ 3, Click
Centering, Wheel Zoom (depending on the camera
model)
•
A camera, a group or
a sequence can be called up on the Operation Display by their ID
with the optional system controller WV-CU950.*1 The camera
displayed in the active window can be controlled by the system
controller. Recorder playback operation can also be made by the
system controller with Jog/Shuttle.
•
Alarm
notification: A pop-up alarm message is displayed.
•
Individual alarm reset and all alarm reset is
possible.
•
Operation Display,
Live Display, Map Display, and wall monitor reacts correspondingly
with the alarm.
•
Displays the present
alarm log in red.
•
When an alarm
occurs, the monitor changes into the map automatically showing
where the alarm happened.
•
Displays the alarmed
wall monitor in red.
•
llustrated camera,
alarm and recorder icons for intuitive operations
•
Up to
64 camera icons can be freely positioned on a map with alarm status
indicated by the color of the icons.*1
•
Recorded images
of up to 64 cameras (in case with WJ-ND400) can be downloaded by
one operation. Downloaded images can be viewed by the viewer
software (provided).
•
Sophisticated user
management: User authentication with time limited password (Not
available in case with WV-ASX400), 5 user levels, User-Camera
View/Control partitioning in conjunction with recorder’s user
management function, Up to 32 user (128 users in case with
WV-ASX400) registrations
•
System logs can be
saved in CSV format. Operation logs can automatically be erased
when specified time has passed (31 / 92 / 184 / 366
days).
•
Audio from a camera
can be heard and the operator voice can be transmitted to the
camera’s audio output through the network (single channel at
a time, full/half duplex depending on the camera).
•
Recorded audio with the WJ-ND200 or WJ-ND400 can be played back
(single channel at a time).
•
Motion frames with
trails for the moving subjects can be displayed when used with the
WJ-NT314.*1
•
When used with
WJ-ND400, VMD search can be operated.
•
When used with
WV-ASX400, it can be used as client software; multiuser management,
alarm management, wall monitor control is
possible.*2 |
| |
|
Specifications of
WVASM100
|
|
Supported
Equipment:
|
| Supported Cameras |
Direct: Panasonic i-Pro series Network cameras except for
WV-NM100 Via Recorder: Panasonic i-Pro series Network cameras, BB
series (specific models) and Axis® (specific models)
|
|
Supported Recorders |
WJ-ND400 series, WJ-ND300 series,
WJ-ND200 series, WJ-HD309A/316A series, WJ-RT416 series
|
|
Supported Encoders |
WJ-NT304, WJ-NT314
|
|
Supported Controllers |
WV-CU950
|
|
Supported Image
Format |
MPEG-4 (i-Pro series except for
WV-NM100), M-JPEG
|
|
Max. Recorder
Registrations |
100, Cameras registered in the
recorders are automatically registered in WV-ASM100/WV-ASM100L
|
|
Max. Encoder
Registrations |
64, Cameras registered in the
encoders are automatically registered in WV-ASM100/WV-ASM100L
|
|
Max.
Camera Registrations |
Camera direct: 256, Via Recorder:
6,400 (in case with WJ-ND400), 3,200 (in case with WJ-ND300A), Via
Encoder: 256 (in case with WJ-NT304, WJ-NT314)
|
| GUI Function: |
|
Camera Control
(depends on the camera) |
Pan/Tilt, Zoom,
Focus, Brightness, Preset position call and program (up to 256),
Auto mode (SEQ, SORT, AUTO PAN, PATROL, AUTO TRACK), AUX 1 ~ 3,
Click centering, Wheel zoom, Group sequence, Group preset*2
|
|
Recorder Control (depends on the
recorder) |
REC, PLAY, Rev PLAY,
Pause, Stop, FF (up to 96x), REW (up to 96x), Prev Record, Next
Record, Prev Image, Next Image, Skip (up to 60 min.), Rev Skip, (up
to 60 min.) Text
|
|
Wall
Monitor Control |
Display division
pattern switch, Group preset, Group sequence, Camera select switch,
Tour sequence, OSD display switch, Display OFF, Monitor lock, Audio
control, Release of monitor control
|
|
Event
Search |
Target: Recorder
(Camera) / Group / Map*1, Search criteria: Time date, Event type,
Text
|
|
VMD
Search |
In case with
WJ-ND400
|
|
Multiscreen
Mode |
Spot / Quad (A-D) /
9 split / 16 split
|
|
Sequence Display |
10 programs, 64
steps/pattern, Spot / Quad / 9 split / 16 split
Dwell time: 3s / 5s / 10s / 15s / 20s / 25s / 30s / 35s / 40s / 45s
/ 50s / 55s / 1min
|
|
Display Performance |
30 ips x 16 screens
at MPEG-4 2 Mbps
|
|
Multi-Monitor*1 |
Up to 4 monitors
(Operation / Live / Map / Wall monitor control*2), Up to 20 cameras
can be displayed
|
|
Camera
Group Display |
Up to 400 groups
with 16 alphanumeric titles
|
|
Number
of Maps*1 |
Up to 100 maps (JPEG
or Bit map), Link: 64 cameras and 20 maps / map
|
|
Image
Download |
Recorded images of
up to 64 cameras (in case with WJ-ND400) can be downloaded. Manual
download only. Viewer software can be extracted from the main
software.
|
|
Camera Title
Display |
On the GUI, Up to 16
characters
|
|
Clock
Display |
On the GUI. Time:
12H/24H, Date: 5 formats (When the image comes from the
recorder)
|
|
Alarm
Source |
Panasonic alarm
protocol
|
|
Alarm
Control |
Reset, Auto reset
(OFF / 10s / 20s / 30s / 1min / 5min), All reset, Suspension*2
|
|
Alarm
Action |
Up to 16 alarm
images can be displayed on the live monitor. Corresponding camera
icon on the map lights up. Alarm message on the GUI and buzzer.
|
|
Digital Zoom |
Up to 4 times
|
|
Text
Attachment |
Free comment can be
attached for each record and reviewed at later time. Up to 200
characters
|
|
System
Log |
Operation (100,000),
System (1,000), Network error (1,000), Recorder error (1,000),
Alarm (30,000)
|
|
Recorder Log
Download |
Operator access,
Network error, Error, Event
|
|
User
Management |
Registration: Up to
32 users + Administrator (128 users*2), ID: 4-14 digit, PW: 4-8
digit,
User level: 5 levels (Programmable), PW time limit: OFF / 31 / 92 /
184 / 366 days*3,
Auto login: ON / OFF, Recorder login user: Up to 16 users
|
|
Partitioning |
User - Camera (View
only, View & Control, No Access) in conjunction with
recorder’s user management
|
|
Security Method |
User authentication
(ID and Password), Alteration detection, Hardware key (USB
dongle)
|
|
System
Setup |
Setup page in
English, French, Italian, Spanish, German, Russian, Chinese
|
|
GUI
Language |
English, French,
Italian, Spanish, German, Russian, Chinese
|
| Viewer
Software: |
|
Playback
Control |
Play, Rev Play,
Pause, FF, REW, Prev Record, Next Record, Prev Image, Next
Image
|
|
Additional Functions |
Alteration
detection, Save as JPEG, Two times zoom, Print
|
| Server
Requirement: |
|
Supported OS |
Microsoft®
Windows® XP Home SP2
|
|
General: |
| Supported OS |
Microsoft® Windows® XP
Home SP2, Microsoft® Windows® XP Professional SP2,
Microsoft® Windows Vista® 32-bit,
The language of the OS must be same as selected GUI language.
|
| Required
PC |
CPU: Intel® Core™ 2 Duo
2.4 GHz or faster, RAM: 1 GB (for Microsoft® Windows®
XP), 2 GB (for Microsoft® Windows Vista®) or more, VRAM:
128 MB or more, Microsoft® DirectX® 9.0c or later
|
|
Network: |
| Proxy |
HTTP proxy supported (IP address
and port No.)
|
| FTP |
Passive/Active
|
Notes:
1. Not available with WV-ASM100L.
2. Function when used with WV-ASX400.
3. Not available with WV-ASX400. |
|
|
