Panasonic WV-NF284 | WV NF284 | WVNF284 Network Camera

Panasonic WV-NF284
Product Code : WV-NF284	· High sensitivity: 1.5 lux (Color) at F1.3 (Wide) / 0.09 lux (Color) at F1.3 (Wide) with Sens Up 16x · MPEG-4 and JPEG dual stream output · MPEG-4/JPEG output at VGA image size with up to 30 ips
Features of WV-NF284

· MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.
· MPEG-4 and JPEG dual stream output for simultaneous live monitoring and high resolution recording.
· Progressive output provides clear images, even when the subject is moving.
· High sensitivity: 1.5 lux at F1.3 (Wide).
· Up to 16x automatic electronic sensitivity enhancement.
· Electronic shutter for anti flicker.
· 2.8 ~ 10 mm, 3.6x varifocal lens built-in
· Video Motion Detector with 4 programmable detection areas and 3 sensitivity levels.
· Monitor output for easier installation.
· Up to 3x digital zoom controlled by browser.
· Camera title display: Up to 20 alphanumeric characters on browser.
· SD Memory card slot for alarm recording and backup upon network failure. Recorded data can be downloaded by using FTP command.
· Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output.
· Built-in microphone for audio (one-way).
· Built-in network interface (10Base-T / 100Base-TX).
· Power over Ethernet (PoE) IEEE 802.3af.
· Multiscreen: Images from 8 cameras can be displayed in two separate Quad screens (JPEG only). 20 characters camera title is available for each camera.
· FTP client function enables periodic image data transfer or transfer upon alarm.
· Alarm e-mail notification
· Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) combined with Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
· Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTP and SNMP.
· Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL), English, French (NTSC), (Installation required except for English).

Specifications of WV-NF284

Camera Specifications:
Image Sensor	1/4-type progressive scan CCD
Effective Pixels	659 (H) x 494 (V)
Scanning Mode	Progressive scan
Scanning Area	3.59 (H) x 2.70 (V) mm
Minimum Illumination	Color (30IRE): 1.5 lux (Sens up: OFF), 0.09 lux (Sens up: 16x) at F1.3 (Wide)
White Balance	AUTO / HOLD
Light Control	ALC with ELC (1/30 ~ 1/100)
BLC	ON / OFF
AGC	Always ON
Electronic Shutter	For flicker less mode: 1/100 ~ 3/100 (Auto select)
Electronic Sensitivity UP	OFF / AUTO (2x, 4x, 8x, 16x)
Video Motion Detector	4 areas, Sensitivity: High / Middle / Low
Digital Zoom	1x, 1.5x, 2x, 2.5x, 3x, Controlled by browser GUI
Lens Mount	Original
Back Focus Adjustment	Manual
Synchronization	Internal
Lens Specifications:
Focal Length	2.8 ~ 10 mm, 3.6x varifocal
Angular Field of View	H : 20.8° (TELE) ~ 73.5° (WIDE) V : 15.6° (TELE) ~ 54.4° (WIDE)
Maximum Aperture Ratio	1 : 1.3 (WIDE) ~ 1 : 3.1 (TELE)
Focusing Range	1.2 m ~ ∞ (3.9 ft. ~ ∞)
Pan and Tilt Specifications:
Panning Range	180° (clockwise), 140° (counterclockwise)
Tilting Range	±75°, Image tilt adjustment range: ±100°
Browser GUI Specifications:
Camera Control	Brightness, AUX ON/OFF
Display Mode	Spot, Quad: Image from 8 cameras can be displayed in 2 different Quad screens (JPEG only). 20 characters camera title available
Digital Zoom	1x, 1.5x, 2x, 2.5x, 3x, Zoom by camera
Camera Title	Up to 20 alphanumeric characters
SD Memory Data Download	Images recorded in the SD memory card can be downloaded.
Clock Display	Time: 12H / 24H, Date: 5 formats on the browser, Summer time (Manual)
Alarm Control	Reset
One Shot Capture	A still picture is displayed on a newly opened window.
Audio	ON / OFF
GUI / Setup Menu Language	English, French, Italian, Spanish, German, Russian (Installation required except for English)
System Log	Up to 100 (Internal), Up to 4,000 (SD memory) error logs
Supported OS	Microsoft® Windows® 2000 Professional SP4, Microsoft® Windows® XP Professional/Home SP2 The language of the OS must be same as selected GUI language.
Supported Browser	Internet Explorer 6.0 SP2 (Windows® XP Home / Professional SP2) Internet Explorer 6.0 SP1 (Only Windows® 2000 Professional SP4)
Network Specifications:
Network IF	10Base-T / 100Base-TX, RJ45 connector IEEE 802.3af. PoE compatible
Image Resolution	VGA (640 x 480) / QVGA (320 x 240)
Image Compression	MPEG-4: Image quality: LOW / NORMAL / FINE, Transmission type: UNICAST / MULTICAST JPEG: Image quality: 10 steps, Transmission type: PULL / PUSH MPEG-4 and JPEG dual streaming and JPEG multi-resolution supported
Image Refresh Rate	0.1 / 0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 5 / 6 / 10 / 15 / 30 ips (Max rate will be 5 ips-VGA, 10 ips-QVGA when transmitting JPEG and MPEG-4 simultaneously)
Audio Compression	G.726 (ADPCM) 32 kbps / 16 kbps
Total Bit Rate	64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited
Max Bit Rate / Client (MPEG-4)	64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps or Frame rate priority (4,096 kbps / Unlimited)
Supported Protocol	TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
FTP Client	Alarm image transfer, FTP Periodic transfer
No. of Simultaneous Users	8 (Depends on network conditions)
SD Memory Card (Option)	Alarm REC / Backup upon network failure. Compatible SD card: Panasonic 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB model
Alarm E-mail	Up to 4 e-mail addresses
User Registration	Up to 16 users
User/Host Level	3 Levels: Administrator, Camera control, Live only
Security Measures	User authentication (ID 32 digit, PW 32 digit), Host authentication (IP address)
Alarm Specifications:
Alarm Source	VMD, Command alarm, Terminal input
Alarm Actions	SD memory recording/FTP image transfer, e-mail notification, Terminal output, Indication on browser, Panasonic protocol output
Input / Output Specifications:
External I/O Terminals	1x Alarm input / 1x Alarm output, 1x AUX output
Monitor Output	1.0 V [p-p] / 75 Ω, PAL composite, ø3.5 mm mini jack
General Specifications:
Safety/EMC Standard	CE (EN55022, EN55024, ClassB), GOST (R 51558).
Power Source and Power Consumption	24 V AC 50/60 Hz: 4.0 W, 12 V DC: 350 mA, PoE (IEEE802.3af): 4.0 W
Operating Temperature	–10 °C ~ +50 °C (14 °F ~ 122 °F)
Operating Humidity	90 % or less (without condensation)
Dimensions	ø122 mm x 136 mm (ø4-13/16" x 5-3/8")
Weight	640 g (1.41 lbs.)

Expandore Singapore India Vietnam

Home > Articles

View our Blogs

Video Blogs	Audio Blogs	Intercom Blogs	Lighting Blogs

Read our blogs