AJ-HD1700Panasonic DVCPROHD Recorder |
 |
|||
|
||||
AJ-HD1700Panasonic DVCPROHD Recorder |
|
|||
|
||||
|
|
||||||||||
| AJ-HD1700 [NTSC, PAL] Specifications |
| General | |
| Power Supply: | AC (100-240) V ±10%, 50 to 60 Hz |
| Power Consumption: | 240W (full option) 220W |
| Operating Temperature: | 41 °F to 104 °F (5°C to 40°C) |
| Operating Humidity: | 10% to 80% (non dew) |
| Weight: | 48.5 lbs (22 kg) |
| Dimensions (WxHxD): | 16-4/3” x 6-15/16” x 17-11/16” (424 x 175.2 x 448.9 mm) |
| Recording Format: | DVCPRO HD-LP |
| Recording Track: | Digital
Video:1080i/720p Digital Audio:8 channels TC:Subcode area Cue:1 longitudinal track CTL:1 longitudinal track |
| Tape Speed: | 67.64mm/s |
| Rec/Play Time: | Max. 126 minutes with
AJ-HP126EX Max. 92 minutes with AJ-HP92LMG |
| Tape: | 1/4” metal particle |
| FF/REW Time: | Less than 1.5 minutes with AJ-HP126EX |
| Search Speed: | ±100x |
| Editing Accuracy: | ±0 frame (TC) |
| Tape Timer Accuracy: | ±1 frame (continuous CTL) |
| Servo Lock Time: | Within 0.3 sec (standby ON) |
| Loading/Unloading TIme: | Approx. 4 sec |
| Video | |
| Sampling Frequency: | Y: 74.25 MHz, Pb/Pr: 37.125 MHz |
| Quantization: | 8 bits |
| Error Correction: | Reed Solomonn Product Code |
| Compression Ratio: | 6.7:1 |
| Bit Rate: | 100 Mbps |
| Digital Audio | |
| Channel: | 8 channels |
| Sampling Frequency: | 48kHz |
| Quantization: | 16 bits |
| Frequency Response: | 20Hz to 20kHz, ±1.0dB (reference level) |
| Dynamic Range: | More than 90dB (1kHz, emphassis off) |
| Distortion: | within 0.05% (1kHz, emphassis off, reference level) |
| Cross Talk: | Less than –80dB (1kHz, between any 2ch) |
| Wow & Flutter: | Below measurable limit |
| Headroom: | 20 dB |
| Cue Audio | |
| Frequency Response: | 300Hz to 6kHz (±3dB) |
| Digital (Video/Audio) Input and Output | |
| HD SDI Input: | BNC x 1, SMPTE
292M BNC x 1 (active through) |
| SD-SDI Input (option) | BNC x 1, BNC x 1
(active through) Video: SMPTE 259M-C Audio: SMPTE 259M-C/272M-A |
| SDTI Input (option): | BNC x 1 (SMPTE 305M/321M) |
| HD SDI Output | BNC x 4 (supeimpose x
1) SMPTE 292M |
| SD-SDI Output | BNC x 2 (supeimpose x
1) Video: SMPTE 259M-C/294M Audio: SMPTE 259M-C/272M-A |
| SDTI Output (option): | BNC x 1 (SMPTE 305M/321M) |
| Video Input | |
| HD Reference: | BNC x 2
(loop-through), 75 On/Off |
| SD Reference: | BNC x 2
(loop-through), 75 On/Off |
| SDTI (option): | BNC x 1, SMPTE 305M |
| Video Output | |
| HD Reference Sync: | BNC x 1 |
| SD Reference Sync: | BNC x 1 |
| Analog Composite: | BNC x 3 (SD playback
or down-convert) OUT2: switchable for WFM OUT OUT3: super on/off |
| Audio Input | |
| Analog: | XLR x 4
(CH1/2/3/4), +4/0/–20/–60 dBu switchable, 600 /high-impedance switchable |
| Digital: | BNC x 4 (CH1/2, CH3/4, CH5/6, CH7/8),AES/EBU |
| Cue: | XLR x 1, +4/0/–20/–60 dBu switchable, Low-impedance |
| Audio Output | |
| Analog: | XLR x 4
(CH1/2/3/4), +4/0/–20 dBu switchable, 600/high-impedance switchable |
| Digital: | BNC x 4 (CH1/2, CH3/4, CH5/6, CH7/8), AES/EBU |
| Cue: | XLR x 1, Low-impedance, +4/0/–20 dBu switchable |
| Monitor: | XLR x 2 (L/R), Low-impedance, +4/0/–20 dBu switchable |
| Phones: | M6, variable
level control, 8 |
| Others | |
| TC IN: | XLR x 1, 0.5 to 8.0 Vp-p |
| TC OUT: | XLR x 1, Low-impedance,2.0Vp-p ±0.5Vp-p |
| RS-422A IN/OUT: | D-sub 9 pin RS-422A I/F |
| RS-422A OUT: | D-sub 9 pin RS-422A I/F |
| RS-232C: | D-sub 25 pin RS-232C I/F |
| Parallel IN/OUT: | D-sub 50 pin |
| Encoder Remote: | D-sub 15 pin |
| Video Output Signal | |
| •Component style | |
| HD SDI Y Output Gain: | –
 to + 3 dB |
| HD SDI Pb Output Gain: | –
to + 3 dB |
| HD SDI Pr Output Gain: | –
to + 3 dB |
| HD SDI Y Black Level: | ±10% |
| SD SDI Y Output Gain: | –
to + 3 dB |
| SD SDI Pb Output Gain: | –
to + 3 dB |
| SD SDI Pr Output Gain: | –
to + 3 dB |
| SD SDI Y Black Level: | ±10% (Black Clip ON/OFF switchable) |
| Composite Y Output Gain: | –
to + 3 dB |
| Composite Pb Output Gain: | –
to + 3 dB |
| Composite Pr Output Gain: | –
to + 3 dB |
| Composite Y Black Level: | ±10% (Black Clip ON/OFF switchable) |
| •Composite style | |
| HD SDI Video Output Gain: | –
to + 3 dB |
| HD SDI Chroma Output Gain: | –
to + 3 dB |
| HD SDI Chroma Phase: | ±30° |
| HD SDI Y Black Level: | ±10% |
| SD SDI Video Output Gain: | –
to + 3 dB |
| SD SDI Chroma Output Gain: | –
to + 3 dB |
| SD SDI Chroma Phase: | ±30° |
| SD SDI Y Black Level: | ±10% (Black Clip ON/OFF switchable) |
| Composite Video Output Gain: | –
to + 3 dB |
| Composite Chroma Output Gain: | –
to + 3 dB |
| Composite Chroma Phase: | ±30° |
| Composite Y Set Up: | ±10% |
| •System Phase | |
| HD SDI Output : | ±5.5H (±1200 Sample, 13.5nS Step) |
| SD SDI Output: | ±5.5H (±9438 Sample, 37nS Step) |
| Compsite Video Output: | ±5.5H (±9438 Sample, 37nS Step) |
| Compsite Video Output SC: | ±180° |
| LCD Monitor | 3" Digtal, Wide view angle, approx. 200,000 pixcels |
| *LCD monitors are manufactured to an extremely high level of precision, but in parts of the screen there may be some pixels that do not display and some that remain on continuously. Please note that this is not a malfunction and that these pixels will not be recorded onto the tape. |
Check it out on our new Expandore web site
