|
Product Code: amm10
 |
The AMM 10 is
the perfect solution for small rooms: a distributed mixing
system consisting of various input and output modules designed
to fit standard installation frames. No need for a central unit
or a rack for the sound equipment – the mixing modules are
directly mounted into cable conduit, walls, ceilings, tables …
Wherever you require a microphone input or an audio connector
for your PC or CD player, the AMM 10 is the system of your
choice.
Each of the modules comes with a low noise, high efficient
amplifier and a plug terminal connector. Connected via CAT 5
cables, the system is extremely flexible and easy to install.
Mic/Line Input Module:
Input module for dynamic microphones and symmetrical line level
signals. The module provides an input level control as well as a
switch to define the designated panorama position (left, middle,
right).
AUX Input Module:
Input module for line level signals from CD, DVD, PC or MP 3
players. The module provides two cinch and one jack connector
inputs and an input level control.
Headphone Output Module:
The headphone output monitoring module provides an output volume
control, a 2 x 4 step bargraph display and a 3.5 mm jack
connector output.
Stereo Line Out Module:
Break-out-box for supermodular mixer system. The module provides
2 XLR connectors for the connection of two active speakers.
C-Mic Input Module with Phantom Power:
Input module for condenser microphones. The module provides a 24
V phantom power supply, input level control as well as a switch
to define the designated panorama position (left, middle,
right).
Recording Output Module:
The recording output module works as a driver for recording
devices like CD recorders, tape decks, PCs, MP3 recorders, etc.
On the front panel the module provides 2 RCA connectors, a 3.5
mm jack connector output and an output volume control.
Control and SUM Output Module:
Stereo sum amplifier module with tone control for treble and
bass as well as an output level control. The internal plug
terminal provides the sum output and a separate recording output
(with fixed output level). The plug terminal also provides
terminals for the signal bus including strain relief and an
insert point for a remote control (to be introduced later).
|
