| Element |
Condenser, dynamic |
| Polar Pattern |
Cardioid |
| Frequency Response |
20-17,000 Hz (condenser) 30-10,000 Hz
(dynamic) |
| Low Frequency Roll-off |
80 Hz, 12 dB/octave
(condenser) |
| Open Circuit Sensitivity |
–51 dB (2.8 mV) re 1V at 1 Pa
(condenser) –54 dB (1.9 mV) re 1V at 1 Pa (dynamic) |
| Impedance |
100 ohms (condenser)
600 ohms (dynamic) |
| Maximum Input Sound Level |
148 dB SPL, 1 kHz at 1% T.H.D.
(condenser); 158 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range (Typical) |
124 dB, 1 kHz at Max
SPL (condenser) |
| Signal-to-Noise Ratio |
70 dB, 1 kHz at 1 Pa (condenser) |
| Phantom Power Requirements |
11-52V DC, 3 mA
typical (condenser) |
| Switch(es) |
High-pass filter; 10 dB pad (nominal)
(condenser only) |
| Weight |
390 g (13.8 oz) |
| Dimensions |
165.0 mm (6.50") long, 55.0 mm (2.17")
maximum diameter |
| Output Connector |
Integral 5-pin XLRM-type |
| Cable(s) |
5 m (16.5') dual shielded, 8-conductor
cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type
output connectors |
| Accessory Included |
AT8471 isolation
clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter;
soft protective pouch |
| Audio-Technica Case Style |
R8 |
