Azden Pro Audio System - UHF Wireless System 100HT


	AZDEN 100HT On-Camera UHF Wireless System 100HT

	The 100HT System consists of the 100UPR receiver and a 10HT handheld mic/transmitter. The new 100UPR receiver features twin-antennas a 3.5mm -58dbB balanced mic level output jack a 3.5mm monitor output jack (with level control) a recessed On/Off switch a Power On/ Signal Received LED and channel selectors to set the desired frequency. Using crystal-control and PLL synthesis the 100UPR operates for better than 8 hours on a single 9V battery. The receiver comes with a "hot-shoe" mount, hook-and-loop mounting tape and a 3.5mm to 3.5mm output cable (Azden's MX-1 3.5mm - to - XLR cable is optional). Included is the new UHF handheld microphone - the 10HT - which is designed to work seamlessly with the on-camera 100UPR receiver. The new mic features Azden�s special surface coating to reduce handling noise. Using an electret-condenser unidirectional element, the 10HT is designed with low-noise PLL circuitry to allow the user to select any one of 63 UHF channels to assure interference free reception in the 794-806MHz range. The new microphone uses two commonly available alkaline �AA� batteries to operate for better than 8 hours. The 10HT is 230mm (9") long and 44mm (1.73") in diameter. 100UPR Frequency Range UHF 63-Channel Selectable (793.750-805.875MHz) Type of Reception Antenna Diversity Oscillator PLL Synthesized RF Squelch Level 16dB�V Frequency Response 50Hz -15kHz S/N Ratio >70dB �A� Weighted Audio Distortion <1% @ 1kHz Operating Temp 0�C �50�C (32�F -122�F) MIC Out (Balanced) �58dBm @ 600 Ω Monitor Out �10dBm (Max) @ 33 Ω MIC Out Connector 3.5mm Balanced Mini-Jack Monitor Out Connector 3.5mm Stereo Mini-lack Power Requirement 1- 9V Alkaline Battery Battery Life 6 - 8 Hours w/Alkaline Battery Dimensions 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches) Weight Approx. 120g Including Battery (4.23oz) 10HT Transmitter Frequency Range UHF 63-Channel Selectable (793.750 � 805.875MHz) Oscillator PLL Synthesized RF Power 10mW Frequency Response 50Hz � 12kHz Max. Deviation �75kHz @ 1kHz Modulation, MIC Input �11dBm S/N Ratio >70dB �A� Weighted Audio Distortion <1% @ 1kHz MIC Element ECM MIC Sensitivity �5kHz @ -46dBm (0dBm+0.775V) Operating Temp. 0�C � 50�C (32�F � 122�F) Power Requirement 2 � 1.5V �AA� Alkaline Batteries � 8-10 Hours Dimensions 230H x � 44D mm (9.05H x 1.73D inches) Weight Approx. 130g Including Batteries (4.58oz)