Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.

The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.

Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.

The APS 25-UH1 includes a APS-UR UHF receiver module and the 10HT transmitter/microphone.

Speaker Technical Specs:
Rated Power: 20 Watts continuous
Frequency Response: 65Hz – 18kHz
Max SPL @ Rated Output: 101db @ 1 meter
Woofer: 5.25" (133.35mm) high efficiency - magnetically shielded
Tweeter: 1" (25mm) dome
Crossover: 1st order passive @ 8kHz
Tone Control: -6dB/octave sliding low pass (3kHz to 8kHz)

Wireless Inputs: 2 user-installable receivers
VHF (169-213mHz) – 30 fixed frequencies
UHF (794-806mHz) – 63 user-selectable frequencies
Infrared – 2 fixed frequencies

Wired Inputs/Output:
Mic: -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable
Line: -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable
Line-Out: +15dBv max - RCA jack

Weight: 8.5lb (3.85kg) approx. w/out receivers
Dimensions: 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
Compliance: UL, C-UL, and FCC approved
AC Power Requirements: User switchable, 110-125 / 210-240VAC - 50Hz/60Hz

Included w/speaker: Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed

Receiver Technical Specs:
Frequency Range: UHF 63-channel Selectable (793.750-805.875MHz)
Oscillator: PLL Synthesized
RF Squelch Level: 14dBµV
Frequency Response: 50Hz - 15kHz
S/N Ratio: better than 90dB (A weighted)
Audio Distortion: <1% @ 1kHz
Operating Temperature Range: 0° - 50° C (32° - 122° F)
Power Requirements: 12V DC @ 120mA

Technical Specs:
Frequency Range: UHF 63 channel selectable (793.750 - 805.875MHz)
Oscillator: PLL synthesized
RF Power: 10mW
Frequency Response: 50Hz - 12kHz
Max. Deviation: +/- 75kHz @ 1kHz modulation, Mic input - 11dBm
S/N Ratio: better than 70dB "A" weighted
Audio Distortion: less than 1% @ 1kHz
Mic Element: ECM
Mic Sensitivity: +/- 5kHz @ -46dBm (0dBm +0.775V)
Operating Temp.: 0 - 50 C (32 - 122 F)
Power Requirement: 2 "AA" Alkaline batteries (2x 1.5VDC)
Battery Life: 8-10 hours w/Alkaline batteries
Dimensions; 230H x 44 mm (9.05 x 1.73")
Weight: approx. 130g w/batteries (4.58 oz)