|
|
|
4099U
Universal Clip Microphone
The 4099U is
a microphone system especially designed to address the
unique mounting challenges of slim bodied and unusually
shaped instruments. It allows for high quality audio
capture while the low profile and light weight of the
unobtrusive design provides visual elegance along with
uncompromised sound quality.
The creative design of the unique microphone clip
includes a hook-and-loop fastener strap which allows the
holder to fit numerous instruments of varying sizes and
diameters such as oboe, clarinet, bassoon, recorder and
flute. The hook-and-loop fastener band pulls tight to
fit the circumference of the instrument, like a wrist
watch on your arm. If using the clip on very large
diameter instruments, additional hook-and-loop fastener
straps can easily be added to extend the clip’s
capacity.
The 4099U includes a revolutionary new “90 degree”
system which provides many more mounting options. By
detaching the clip from the gooseneck and re-mounting it
turned 90 degrees, the number of mic positions is
doubled.
The 4099U includes a 3-pin XLR phantom power adapter.
The UC4099 Universal Clip is available separately, and
can be used with any of the various versions of the 4099
family.
The package
includes
A supercardioid gooseneck mic with cable
Integrated windscreen and shock mount system
Clip with hook-and-loop fastener to mount on various
instruments (also available separately as UC4099)
XLR adapter with belt clip
Adapters for
wireless microphones
A wide range of connection adapters makes it possible to
use DPA miniature microphones with all professional UHF,
VHF or digital wireless system available plus 48 V
Phantom.
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica,
Beyerdynamic, Electro-Voice, Lectrosonics, Micron, Mipro,
Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure,
Sony, Toa, Vega and other systems. Each adapter for your
cordless microphone is guaranteed to perfectly mate to
your system of choice. |
|
General Specifications |
|
Directional characteristics: |
Supercardioid |
|
Principle of operation: |
Pressure gradient |
|
Cartridge type: |
Pre-polarized condenser |
|
Frequency range, ± 2 dB: |
20 Hz – 20 kHz |
|
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
80 Hz to 15 kHz with 2 dB
soft boost at 10 to 12 kHz |
|
Sensitivity, nominal, ±3 dB: |
6 mV/Pa; -44.5 dB re. 1
V/Pa |
|
Equivalent noise level A-weighted: |
Typ. 23 dB(A) re. 20 µPa
(max. 26 dB(A)) |
|
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB |
|
Total harmonic distortion (THD): |
<1% THD up to 123 dB SPL
peak; < 1 % up to 120 dB SPL RMS sine |
|
Dynamic range: |
100 dB |
|
Max. SPL, peak before clipping: |
142 dB |
|
Output impedance: |
From MicroDot: 30 to 40
ohm, from DAD6001: 100 ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) with
DAD6001 XLR adapter |
|
Output balance principle: |
Signal balanced with
DAD6001 XLR adapter |
|
Common Mode Rejection Ratio (CMRR): |
> 60 dB from 50 Hz to 15
kHz with DAD6001 XLR adapter |
|
Polarity: |
Positively increasing
sound pressure produces positive-going voltage at MicroDot pin (and pin
2 on DAD6001 XLR adapter) |
|
Power supply: |
Min. 5 V to max. 50 V
through DPA adapter for wireless systems; 48 V phantom power ± 4 V with
DAD6001 XLR adapter |
|
Current consumption: |
Typ. 1.5 mA (microphone).
3.5 mA with DAD6001 XLR adapter |
|
Connector: |
MicroDot |
|
Color: |
Black |
|
Capsule
diameter: |
5.4 mm (0.2 in) |
|
Cable length: |
1.8 m
(6 ft) |
|
Gooseneck, length: |
140 mm (5.5 in) |
|
Microphone length: |
45 mm (1.8 in) |
|
Weight: |
41 g (1.4 oz) |
|
Relative humidity (RH): |
Up to 90 % |
|
Temperature range: |
-40 °C to 45 °C (-40 °F to
113 °F) |
|
| |
|
|
|
