|
|
| |
4098H
Hanging Supercardioid Microphone
|
| |
Product Code:4098Hmini
 |
Model:4098H
Miniature Microphone
Dedicated to hanging
applications like churches, performing arts centers,
orchestra pits, theatres and TV studios, the 4098H delivers
sparkling clear and distinct natural sound for both
recording and sound reinforcement of choirs, instrumental or
vocal groups, speech or live audiences. |
|
| |
|
|
| |
|
|
|
|
4098H Hanging Supercardioid Microphone
-
Accurate, natural sound with superior gain before
feedback
-
Minimal
visual impact, available in black and white
-
Exceptional RF interference rejection
Dedicated to
hanging applications like churches, performing arts
centers, orchestra pits, theatres and TV studios, the
4098H delivers sparkling clear and distinct natural
sound for both recording and sound reinforcement of
choirs, instrumental or vocal groups, speech or live
audiences.
The 4098H represents a breakthrough in discreet, elegant
and lightweight design. Extremely low in profile, the
integrated gooseneck provides the ability to easily aim
the mics, ensuring perfect positioning with minimal
visual impact since the cables are very slim and nearly
invisible.
These microphones live up to their pedigree with sound
as accurate as DPA’s other world-class microphones with
clear and natural sound, flat response and uniform
off-axis sound combined with excellent
gain-before-feedback characteristics for live sound. The
4098H has extremely high rejection of RF interference
post the signal balanced XLR connector which offers more
than 60 dB common mode rejection.
With its easy to hang and aim design along with its
extremely natural sound, the 4098H is truly a hanging
microphone without equal that continues the heritage of
sonic excellence from DPA Microphones. |
|
General Specifications |
|
Directional characteristics: |
Supercardioid |
|
Principle of operation: |
Pressure gradient |
|
Cartridge type: |
Pre-polarized condenser
|
|
Frequency range: |
20Hz to 20kHz |
|
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
80 Hz to 15 kHz with 3 dB
diffuse field boost at 8 to 15 kHz |
|
Sensitivity, nominal, ±3 dB at 1 kHz: |
20 mV/Pa; -34 dB re. 1
V/Pa |
|
Equivalent noise level A-weighted: |
Typ. 23 dB(A) re. 20 µPa
(max. 26 dB) |
|
Equivalent noise level, ITU-R BS.468-4: |
Typ. 35 dB (max. 38 dB) |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB(A) |
|
Total harmonic distortion (THD): |
< 1 % up to 123 dB SPL
peak, < 1 % up to 120 dB SPL RMS sine |
|
Dynamic range: |
Typ. 100 dB |
|
Max. SPL, peak before clipping: |
134 dB |
|
Output impedance: |
From MicroDot: 30 to 40
ohm; from DAD6001-BC: 100 ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) with
DAD6001 XLR adapter |
|
Output balance principle: |
Signal balanced with
DAD6001-BC XLR adapter |
|
Common Mode Rejection Ration (CMRR): |
> 60 dB at 50 Hz to 15 kHz
with DAD6001-BC XLR adapter |
|
Power supply (for full performance): |
For wireless systems: Min.
5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4
V |
|
Current consumption: |
1.5 mA (microphone); 3.5
mA with DAD6001-BC XLR adapter |
|
Connector: |
MicroDot; 3 pin XLR-M from
DAD6001 XLR adapter |
|
Color: |
Black (4098HB) or white
(4098HW) |
|
Microphone Weight: |
5 g (0.18 oz) |
|
Microphone diameter: |
10 mm (0.39 in) |
|
Capsule diameter: |
5.4 mm (0.2 in) |
|
Microphone length: |
154 mm (6.1 in) |
|
Polarity: |
Positively increasing
sound pressure produces positive going voltage on MicroDot pin (and pin
2 on DAD6001-BC XLR adapter) |
|
Temperature Range: |
-40 °C to 45 °C (-40 °F to
113 °F) |
|
Relative humidity: |
Up to 90 % |
|
Gooseneck length: |
95 mm (3.7 in) |
|
| |
|
|
|
|
