|
|
|
LMK4060 Lavalier Microphone Kit
The LMK4060
Lavalier Microphone Kit is perfect for broadcasters, TV
studios, news anchors and other public speakers.
Minimum visibility
A robust and
unobtrusive solution, the tiny 4060 mic is placed in the
smallest holder on the market where it is protected from
rough handling.
The kit is available in black and white.
Microphone placement
The miniature condenser mic is omnidirectional and picks
up the sound perfectly, no matter which direction the
microphone is placed in.
The holder is designed to minimize clothing noise, and
is prepared for both left and right mounting on lapels,
shirts, and neckties.
Two different protection grids are included in the kit.
By changing these grids you can acoustically modify the
microphone's response according to placement.
Microphone
specifications
Offering great detail and resolution, the DPA 4060 omni
miniature is very natural sounding. The 4060 has a very
low noise floor, impressive sensitivity and can handle
high SPLs. For full technical specs, please click the
Specifications tab above.
What is in the box
The DPA LMK4060 Lavalier Microphone Kit contains:
4060 omnidirectional microphone with 3 meter cable
DAD6001-BC adapter, MicroDot to 3-pin XLR (P48) with
belt clip
DMM0017 Miniature mic holder
DUA6001 Grid, soft boost
DUA6002 Grid, high boost |
|
General Specifications |
|
Directional characteristics: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Cartridge type: |
Pre-polarized condenser
element with vertical diaphragm |
|
Frequency range, ± 2 dB: |
Soft Boost Grid: 20 Hz-20
kHz ±2 dB, 3 dB soft boost at 8-20 kHz. High boost grid: 20 Hz – 20 kHz,
10 dB boost at 12 kHz. |
|
Sensitivity, nominal, ±3 dB at 1 kHz:: |
20 mV/Pa; -34 dB re. 1
V/Pa |
|
Equivalent noise level A-weighted: |
Typ. 23 dB(A) re. 20 µPa
(max. 26 dB(A)) |
|
Equiv. noise level ITU-R BS.468-4: |
Typ. 35 dB (max. 38 dB) |
|
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 71 dB(A) |
|
Total harmonic distortion (THD): |
<1% THD up to 123 dB SPL
peak; < 1 % THD up to 120 dB SPL RMS sine |
|
Dynamic range: |
Typ. 100 dB |
|
Max. SPL, peak before clipping: |
134 dB |
|
Output impedance: |
30-40 Ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) |
|
Color: |
Black or white |
|
Microphone weight: |
7.5 g (0.26 oz) incl.
cable and MicroDot connector |
|
Microphone diameter: |
5.4 mm (0.21 in) |
|
Connector: |
MicroDot |
|
Cable length: |
1.8 m (5.9 ft) |
|
Microphone length: |
12.7 mm (0.5 in) |
|
Polarity: |
Positively increasing
sound pressure produces positive going voltage on MicroDot pin |
|
| |
|
|
|
