|
|
| |
4051/52/53
Compact Omnidirectional
|
| |
Product Code:40515253
 |
Model:4051/52/53
Other Microphones - Omnidirectional
The DPA Compact omnidirectional phantom powered
(P48) condenser microphones use the same type of cartridge as the famous DPA
4006, but is preamplified using a built-in ultra small thick-film mounted FET
preamplifier, which enables the cartridge to be mounted on a extremely compact
microphone housing. |
|
| |
|
|
| |
|
|
|
|
4051/52/53 Compact Omnidirectional
-
great
for instrument miking or invisible installations in
concert halls
-
obvious
choice when high definition audio is paramount
-
comes in
three variants: with rear cable, side cable or
connector
The DPA
Compact omnidirectional phantom powered (P48) condenser
microphones use the same type of cartridge as the famous
DPA 4006, but is preamplified using a built-in ultra
small thick-film mounted FET preamplifier, which enables
the cartridge to be mounted on a extremely compact
microphone housing.
The linear on-axis frequency response from 20 Hz to 20
kHz (±2 dB) together with the ultra-small design makes
the compact omni the perfect choice for all kinds of
on-camera or on-stage use where high definition audio is
paramount.
Three variants
The
4051 has its cable
mounted at 90° to the microphone axis, which
mechanically is perfect for situations where the
microphone needs to be mounted directly on the musical
instrument or suspended to record an audience.
The
4052 has its cable
mounted behind the microphone axis for situations where
the microphone needs to be suspended from its own cable.
The
4053 has a standard
LEMO connector for simple and safe mounting and removal
of the microphone capsule but also for use together with
the elegant and flexible Flamingo Series floor stands.
The microphone is supplied with a 3 m cable LEMO to XLR.
Both the 4052 and the 4053 Compact Omnis are extremely
popular as A-B Stereo pairs in concert halls where the
beautiful architecture has to go hand in hand with
quality recordings. |
|
General Specifications |
|
Directional characteristics: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Cartridge type: |
16 mm (0.6 in)
pre-polarised condenser |
|
Frequency range,
± 2 dB: |
On-axis: 20 Hz - 20 kHz |
|
Sensitivity, nominal, ±2 dB: |
30 mV/Pa; -30 dB re. 1
V/Pa |
|
Equivalent noise level A-weighted: |
Typ. 15 dB(A) re. 20 µPa
(max. 17 dB(A)) |
|
Equiv. noise level ITU-R BS.468-4: |
Typ. 27 dB (max. 29 dB) |
|
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
79 dB(A) |
|
Total harmonic distortion (THD): |
<0.5 % THD up to 125 dB
SPL peak, <1 % THD up to 131 dB SPL peak |
|
Dynamic range: |
Typ. 116 dB |
|
Output impedance: |
<300 ohm |
|
Max. SPL, peak before clipping: |
135 dB |
|
Cable drive capability: |
Up to 100 m (328 ft) after
XLR connector |
|
Current consumption: |
2.6 mA |
|
Connector: |
3-pin XLR-M (Standard P48) |
|
Weight: |
22 g (0.78 oz) (without
cable) |
|
Microphone Length: |
25 mm (0.98 in) |
|
Capsule diameter: |
24 mm (0.94 in) |
|
Cable Length: |
3 m (9.8 ft) |
|
Operating temperature range: |
-40 to +55° C (-40 to 131°
F) |
|
Power supply: |
48 V Phantom power |
|
| |
|
|
|
|
