|
|
| |
2006A Twin
Diaphragm Omni Microphone
|
| |

Product Code:2006A
 |
Model:2006A
Reference Standard Microphones
2006A is part of the flexible
DPA Reference Standard series.
Also available:
ST2006A stereo pair |
|
| |
|
|
| |
|
|
|
|
2006A Twin Diaphragm Omni Microphone
Redefining value for money
The new DPA 2006 microphone has strong references to the
acclaimed DPA 4006 omni microphone – by its type number
06, its overall sound character, and its industrial
design.
The difference is in the capsule technology that in the
2000 series features the new Twin Diaphragm Capsule
technology. Comparison with its big brother, the iconic
4006, is inevitable. The relationship between the two is
clearly heard from the first 2006 audio glance; the 2000
series simply performs like much more exclusive
microphones from the premium class and redefines the
term value for money.
Modular
upgradability
2006A is part of the flexible DPA Reference Standard
series. The 2006A with the MMP-A preamplifier is the
audiophile’s choice with low distortion and total
accurate and faithful sound, where the 2006C MMP-C
compact preamplifier offers a subtle character
alteration with a bit more “body” to the low end – in
addition to its easier-to-position approach.
At any time and with no tools necessary it is possible
to transform the basic 2006 microphone into a new
configuration by combining it with another DPA
microphone capsule or preamp.
Twin Diaphragm
Capsule technology
The overall distinctive sound image from the DPA
miniatures is so well balanced that it meets the high
demands of the DPA Reference Standard league.
In a 2006 capsule two opposite facing miniature capsules
are custom re-built into a double diaphragm, one-capsule
composition. This combines the advantages of small
capsules (fast impulse response and large frequency
bandwidth) with lower inherent noise achieved from a
larger diaphragm area.
The capsules are loaded to the supreme Reference
Standard preamps instead of the tiny miniature FET
preamp from the miniature mics, offering even more air
and precision.
Dedicated to
acoustic authenticity
Every engineer and musician concerned with getting the
precise acoustic fingerprint on track will be pleased by
the true tone delivered by the 2006. Acoustic piano,
guitar, wind instruments and choirs are among the most
evident applications.
As main AB stereo pair the 2006s offer an impeccable
combination of two ordinary frequency responses from the
4006 with specially tailored high frequency response
that lies perfectly in between the responses from the
near-field (silver) grid and the diffuse-field (black)
grid.
Also available as
matched stereo pair
The
ST2006A stereo pair is supplied in a specially
designed PeliTM Case, the stereo matching is free of
charge. |
|
General Specifications |
|
Directional pattern: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Cartridge Type: |
Pre-polarized condenser,
Twin Diaphragm Capsule |
|
Frequency range: |
20 Hz to 20 kHz |
|
Frequency range, ± 2 dB: |
50 Hz to 20 kHz with typ.
3 dB soft boost at 14 kHz |
|
Sensitivity, nominal, ± 2 dB at 1 kHz: |
40 mV/Pa; -28 dB re. 1 V/Pa |
|
Equivalent noise level, A-weighted: |
Typ. 16 dB(A) re. 20 µPa
(max. 18 dB(A)) |
|
Equivalent noise level, ITU-R BS.468-4: |
Typ. 28 dB (max. 30 dB) |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 78 dB(A) |
|
Total Harmonic Distortion (THD) at 1 kHz: |
< 1 % up to 130 dB SPL
peak |
|
Minimum load impedance: |
2 kohm |
|
Dynamic range: |
Typ. 114 dB |
|
Switchable attenuator: |
0 dB / -20 dB |
|
Output impedance: |
<200 ohm |
|
Cable drive capability: |
100 m (328 ft) |
|
Output balance principle: |
Impedance balancing with
Active Drive |
|
Common Mode Rejection Ratio (CMRR): |
> 60 dB |
|
Power supply (for full specifications): |
48 V Phantom power (± 4 V) |
|
Current consumption: |
2.8 mA |
|
Color: |
Matte black |
|
Weight: |
160 g (5.6 oz) |
|
Diameter: |
19 mm (0.75 in) |
|
Microphone Length: |
164 mm (6.5 in) |
|
Output voltage, RMS: |
> 5 V |
|
Connector: |
XLR-3M. Pin 1: shield, Pin
2: signal + phase, Pin 3: - phase |
|
Polarity: |
+V at Pin 2 for positive
sound pressure |
|
Temperature range: |
-40 °C to 45 °C (-40 °F to
113 °F) |
|
Relative Humidity (RH): |
Up to 90% |

|
| |
|
|
|
|