|
|
| |
4011C Cardioid Microphone,
Compact
|
| |
Product Code:4011C
 |
Model:4011C
Reference Standard Microphones
The diminutive design and high
performance of the DPA 4011C makes it the outstanding choice
for unobtrusively miking all types of television, film,
theatre, concert and studio performances.
Also available:
ST4011C stereo pair |
|
| |
|
|
| |
|
|
|
|
4011C Cardioid Microphone, Compact
Maximum
clarity, minimum visibility
DPA’s Compact Cardioid range is proof that stunning
clarity and absolute neutrality are not solely the
characteristics of full-sized studio condenser mics
alone. Designed to be hidden from view, the diminutive
design and high performance of the DPA 4011C makes it
the outstanding choice for unobtrusively miking all
types of television, film, theatre, concert and studio
performances.
Limited in size,
not application
Capable of handling high SPLs without distortion, the
4011C is perfectly tailored for close-miking
applications, minimizing bleed from other instruments.
When used to spot-mike larger orchestras, these mics are
hard to beat, and in film and TV studios, they are
excellent for off-camera voice recording or Foley work.
For live on-camera recordings, their matte black finish
gives them a classic yet inconspicuous appearance, while
for sound reinforcement in concert halls, theatres and
houses of worship, they provide clean, natural sound
while reducing the noticeable effect of lighting
reflection.
Also available as
matched stereo pair
The
ST4011C stereo pair is supplied in a specially
designed PeliTM Case, the stereo matching is free of
charge. |
|
General Specifications |
|
Directional pattern: |
Cardioid |
|
Principle of operation: |
Pressure Gradient |
|
Cartridge Type: |
Pre-polarized condenser |
|
Frequency range: |
20 Hz to 20 kHz |
|
Frequency range, ± 2 dB: |
40 Hz to 20 kHz
|
|
Sensitivity, nominal, ± 2 dB at 1 kHz: |
10 mV/Pa; -40 dB re. 1 V/Pa |
|
Equivalent noise level, A-weighted: |
Typ. 18 dB(A) re. 20 µPa
(max. 20 dB(A)) |
|
Equivalent noise level, ITU-R BS.468-4: |
Typ. 25 dB |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 76 dB(A) |
|
Total Harmonic Distortion (THD) at 1 kHz: |
< 1 % up to 139 dB SPL
peak |
|
Minimum load impedance: |
2 kohm |
|
Dynamic range: |
Typ. 1121dB |
|
Max. SPL, peak before clipping: |
152 dB |
|
Output impedance: |
<200 ohm |
|
Cable drive capability: |
100 m (328 ft) |
|
Output balance principle: |
Impedance balancing with
Active Drive |
|
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
|
Power supply (for full specifications): |
48 V Phantom power (± 4 V) |
|
Current consumption: |
2.8 mA |
|
Color: |
Matte black |
|
Weight: |
58 g (2 oz) |
|
Diameter: |
19 mm (0.75
in) |
|
Capsule diameter: |
19 mm (0.75 in) |
|
Output voltage, RMS: |
> 4 V |
|
Microphone Length: |
64 mm (2.5 in) |
|
Polarity: |
+V at Pin 2 for positive
sound pressure |
|
Connector: |
XLR-3M. Pin 1: shield, Pin
2: signal + phase, Pin 3: - phase |
|
Relative Humidity (RH): |
Up to 90% |
|
Temperature range: |
-40 °C to 45 °C (-40 °F to
113 °F) |
|
Matching tolerance: |
± 1 dB |
|
Phase deviation for kit: |
< 10° |
|
| |
|
|
|
|
