|
|
|
MMP-C Compact Preamp
Ultra-compact preamp with active drive for impedance
balancing.
Has a slightly more musical and slightly softer
character than the other preamps in the DPA Reference
Standard series.
Combine this preamp with any capsule in the series.
Related article from the Microphone University:
Impedance balancing with Active Drive vs transformer
coupled outputs
|
|
General Specifications |
|
Output connector: |
XLR-3M. Pin 1: shield, Pin
2: signal + phase, Pin 3: - phase |
|
Low-cut frequency, -3 dB: |
15 Hz |
|
Noise with shorted input, A-weighted: |
0.6 µV |
|
Output voltage, RMS: |
> 4 V |
|
Output voltage, peak: |
> 5.6 V |
|
Type of electronic circuit: |
Active |
|
THD@1VRMS, 1kHz: |
< 0.2 % |
|
Dynamic range: |
136 dB |
|
Cable drive capability: |
100 m (328
ft) |
|
Output impedance: |
< 200 ohm |
|
Output balance principle: |
Impedance balancing with
Active Drive |
|
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
|
Power supply (for full specifications): |
48 V Phantom power (± 4 V) |
|
Current consumption: |
2.8 mA |
|
Temperature range: |
-40 °C to 45 °C (-40 °F to
113 °F) |
|
Color: |
Matte black |
|
Weight: |
40 g (1.4 oz) |
|
Diameter: |
19 mm (0.75
in) |
|
Microphone Length: |
41 mm (1.6 in) |
|
Relative Humidity (RH): |
Up to 90% |
|
| |
|
|
|
