|
|
|
ALP5 |
| The ALP 5 is
a time and phase corrected biamplified monitor that redefines excellence
in small-footprint studio reference systems. They deliver a sound that's
much wider, much deeper, much more defined, and packed with much more
low-end punch than mere mortal direct field monitors. |
|
|
Specifications |
- Low Frequency Driver: 5.25 in.
magnetically shielded mineral-filled polypropylene cone with high
temperature voice coil and damped rubber surroun
- High Frequency Driver: 1 in.
magnetically shielded soft dome neodymium radiator with ferrofluid-cooled
voice coil
- Frequency Response: 53Hz - 20kHz,
+/-3dB, Ref 500Hz
- Crossover: 2.6kHz active
4th-order
- Amplifier Power: 50W LF Driver /
30W HF Driver
- Noise: >100dB below full output,
20Hz - 20kHz bandwidth, unweighted
- Input Connectors: XLR and 1/4 in.
connectors, accept balanced or unbalanced sources; RCA connector,
accepts unbalanced sources
- Protection: RF interference,
output current limiting, over temperature, turn-on/off transient,
subsonic filter, internal mains fuse
|
|
