|
Sound Devices CL-2 Remote Fader Controller
for 788T |
Sound Devices
CL-2 Remote Fader Controller">
  |
|
CL-2 Remote Fader Controller for 788T Recorders
The CL-2 Remote Fader Controller adds a remote level
control to any 788T input with its 30mm linear fader.
Additionally, its two, two-position programmable toggle
switches can be assigned device control or activate menu
selections.
The Cl-2 can be mounted directly to a boom pole with the
included fasteners, or can be placed on the sound cart or
held in hand. Its three status LED's indicate record status,
record media readiness, and power. Common uses for the
switches include remote-record control, tone activation, PFL
activation of an input, and playback control.
The CL-2 is connected to the 788T using its C. Link
connection via the included 1.8-meter flexible cable.
All control and setup of the CL-2 is accomplished in the
788T recorder Setup Menu.
The CL-2 Remote Fader is an optional accessory for the
788T/788T-SSD Digital Recorders. The units linear fader can
be programmed for fader control of any 788T input. The CL-2
can be mounted directly to most boom poles for easy level
control of the assigned channel. The CL-2 is also usable
in-hand or placed a fl at surface. The CL-2 is also equipped
with four programmable switches (two momentary, two
latching) which are assigned from the 788T to control
various 788T functions, including Record On and Off. The 30
mm fader and switches are positioned for ease-of-use by both
left- and right-handed users. |
Product Code:SDCL2
Sound Devices CL-2 Remote Fader Controller">
 |
|
Key Features of CL-2 |
Convenient fader control for any
788T/788T-SSD input
Two two-position toggle switches, programmable to control record start/stop and
other functions
LEDs to indicate record and power status
Can be mounted directly to a boom pole or used remotely
Powered by the 788T recorder
Single cable connection between CL-2 and the recorder
|
|
Specifications of CL-2 |
|
Fader |
30 mm |
|
Logic Switches |
two switches, both with
momentary and latching positions, assignable to multiple
functions. |
|
Straps |
military grade Nylon hook
and loop fasteners, 7 x 1, count of two |
|
Included RJ Cable |
6 CAT5-FLEX Male to Male |
|
Powering |
Powered by the 788T via the
C.Link connector |
|
Dimensions |
1.24 (1.7 w/ fader) x
1.43 x 4.23 (H x W x D) |
|
Weight |
4 oz |
|
| |
|
|
