Sound Devices XL-SATA Drive Interface for
722 and 744T
Sound Devices
XL-SATA Drive Interface for 722 and 744T ">
XL-SATA Drive Interface for
722 and 744T
The XL-SATA Drive Interface provides an internal connection to
2.5-inch SATA (serial ATA) drives for 722 and 744T models
originally equipped with PATA / IDE internal hard drives. Drive
not included.
The XL-SATA Drive Interface allows the connection of most
2.5-inch SATA (Serial ATA) hard drives
to 722 and 744T models originally equipped with PATA (Parellel
ATA) or IDE internal hard drives.
XL-SATA Packing List
1) XL-SATA Drive Interface
1) Printed User Guide and Installation Instructions
2) Pink Protective Foam Rings
2) 3 x .5 mm Nylon Phillips Head Screws
5) 4-40 x 1.75” Black Oxide Phillips Head Screws
Equipment Not Included
Required for Installation
1) #1 Phillips Head Screwdriver
1) 2.5” SATA Drive
Sound Devices recommends 5400 RPM hard drives or high quality
solid state drives when choosing
a drive replacement. When choosing a substitute hard drive, note
that higher RPM hard drives draw
more current, reducing battery run time. Higher speed drives may
be used with the 7-Series Recorders,
however they will not signifi cantly improve performance. They
will slightly increase transfer
throughput with the penalty of increased current draw and
reduced battery run time. The 7-Series
can address drives with capacities up to 2 TB.