|
Specifications |
|
|
Frequency Response: |
10 Hz - 50 kHz, -±1.0 dB, any input to any
output, gain controls set to 50% |
|
Voltage Gain: |
34 dB from balanced line to headphone
output, 35 dB from headphone input to headphone output |
|
Output Clipping Level: |
+18 dBu minimum with 600 ohm load, +16 dBu
minimum with 300 ohm load |
|
Headphone Output Impedance: |
200 ohms |
|
Input Clipping Level: |
XLR: +24 dBu minimum
1/4-inch and 1/8-inch inputs: +22 dBu minimum |
|
Dynamic Range: |
(balanced line inputs): 120 dB minimum |
|
THD + Noise: |
0.03% maximum (from 10 Hz to 22 kHz @ +10
dBu input and output level, 300 ohm load, 10 Hz - 22 kHz filter bandwidth) |
|
Inputs: |
XLR: electronically balanced, 22k ohm input
impedance, 1/4-inch unbalanced: 9.1k ohm impedance
1/8-inch unbalanced: 9.1k ohm impedance |
|
Internal Voltage Rails: |
±15 V, regulated |
|
Power Source: |
Internal: 2 AA alkaline batteries, 18 hours
life typical with nominal levels. External: 5 - 17 VDC via threaded
coaxial connector (5.5 mm outer diameter, 2.1 mm inner diameter), pin
positive, sleeve negative |
|
Power LED: |
Green indicates power and good battery. Red
indicates power with low batteries. LED turns red when ~ 4 hours of
battery life remain |
|
Operating Temperature Range: |
0 to 70 degrees C
32 to 160 degrees F |
|
Dimensions: |
43 mm x 94 mm x 140 mm (h x w x d) (1.7" x
3.7" x 5.5") |
|
Weight: |
(unit only): 0.56 kg ; 1.24 lbs |
|
Included Accessories: |
1/4-inch to 1/8-inch trs interconnect
cable, rubber feet (4), locking DC jack |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
