|
|
|
Yamaha Network
Interfaces - NHB32-C |
|

|
Model: NHB32-C
Yamaha Network Interface

A 32-channel AES/EBU and CobraNet™
interface that facilitates construction of up to 64-channel audio
and control networks with a LAN infrastructure |
Features
Specifications
Applications |
|
32-channel Digital Audio interfacing
with CobraNet™ Devices
32 In/32 Out Audio and Control
Interface
- The NHB32-C is a 32 input/32
output channel interface unit for CobraNet™ and AES/EBU
connections
- Use the NHB32-C to transfer
control signals for the ACU16-C amp control unit, MIDI devices,
or remote head amplifier (AD8HR)
*
* Only one control
type can be used at a time
About CobraNet™
There is a growing need for
large-scale audio systems, and with it the need for advanced
networking technologies that can distribute high-quality audio
quickly and reliably throughout large venues or open facilities with
fully integrated control. CobraNet™ is a sophisticated technology
that enables transfer of multiple audio and control channels via
Ethernet cable
As an integrated system, CobraNet allows digital data to be carried
up to 100 meters* from one port to another device by common
CAT-5/100Base-TX cabling, or up to 2 kilometers by optical fiber. It
is fast, with constant 5.33ms latency**; it is reliable, thanks to
built-in redundant systems; and, with the standard cabling and
connections, it is remarkably easy to use and economical
* The actual maximum length of cables may
differ depending on the quality of the Ethernet equipment or the
particular settings used.
** Low latency mode of CobraNet™ is now supported, which enables
users to choose from 5.33ms, 2.67ms and 1.33ms
 |
|
Features |
- Digital Transfer of Up To 32
Input and 32 Output Audio Channels
- MIDI, Head Amp Remote (AD8HR,
AD824) and Amplifier Control
|
- Up To Sixty-Four Channels Of
Audio with One Ethernet Cable
- Line Duplication for Superior
Reliability
|
|
General
Specifications |
|
Maximum unit count |
8 units for a CobraNet network
|
|
Maximum input channel count (from/to
CobraNet) |
32ch (48kHz/20bit); 28ch
(48kHz/24bit) |
|
Sampling frequency rate |
48kHz, 96kHz |
|
Front panel |
USB : PC USB connector
UNIT ID : ID dial
WORD CLOCK SELECT : from AES/EBU; NETWORK; WORD CLOCK IN
PATCH SELECT
POWER ON/OFF |
|
Rear panel |
AES/EBU 1-4 : 8ch/connector;
Dsub-25pin x 4
WORDCLOCK : IN/OUT; BNC x 2
CobraNet™ : PRIMARY/SECONDARY; RJ45 x 2
COM : Dsub-9pin (male); for AD8HR HA control
TO COMPUTER : Dsub-9pin (male)
MIDI : IN/OUT; DIN5pin x 2 (IN/OUT) |
|
Power requirements |
Japan: AC100V, 50/60Hz, 40W
North America: AC110-120V, 50/60Hz, 40W
Other Areas: AC220-240V, 50/60Hz, 40W |
|
Dimensions(W x H x D) and Weight |
480 x 44 x 386 mm; 5kg
18 7/8" x 1 3/4" x 15 3/16"; 11lbs |
 |
|
|
|
Applications |
Monitoring and control of
multiple amplifiers with NetworkAmp Manager
- The ACU16-C amplifier control
unit and a PC running NetworkAmp Manager can monitor/control of
up to a total of 32 Tn and PC-1N amplifiers. Parameters that can
be monitored and controlled include power, attenuation, inputs,
outputs, temperature and load impedance
- A PC running NetworkAmp
Manager can be connected directly to an ACU16-C via a USB port,
or to an NHB32-C network hub/bridge on a CobraNet™ network. This
capability gives you multiple remote amp control in larger
systems for dramatically improved operating efficiency
- When used on a CobraNet™
network the ACU16-C's DA conversion function can convert up to
16 channels of digital audio to high-quality 48Hz/20-bit or
24-bit analog audio output
- Up to eight NHB32-C units and
sixteen ACU16-C units can be connected on a single CobraNet™
Network, giving you the freedom to configure large-scale audio
networks
|
 |
|
|