Offer Yamaha Powered Mixer - EMX512SC, EMX312SC, EMX212S

Yamaha Powered Mixer - EMX512SC, EMX312SC, EMX212S

	Model: EMX512SC, EMX312SC, EMX212S Yamaha Powered Mixer Top-quality effects and GEQ on all models, plus compression on the EMX512SC and EMX312SC. Choose 500, 300, or 200 watt stereo power output in a portable box-type mixer
	Features Specifications Optional Accessories: MG Series : (MG32/14FX, MG24/14FX, MG16/6FX, MG16/12FX, MG12/4, MG10/2, MG8/2FX) BR Series

Integrated Solutions for Superior Live Sound Experienced musicians, performers, speakers, and club operators know the importance of a high-quality sound system with the right features and performance to deliver their sound. Where portability and convenience are important criteria, a system based on a high-performance Yamaha EMX-series powered mixer is definitely the way to go. In one integrated, portable unit you have a mixer to combine and balance your microphone and instrument and line sources, effects to refine and polish your sound, and power to drive the main speakers and even monitor speakers as well. But that's nowhere near the whole story - Yamaha EMX-series Powered Mixers offer a range of features that let you mix, process, and deliver your sound with maximum quality and creative control … and, of course, that unrivalled Yamaha sound
Features

All-in-one for Easy Operation and Fast Setup Superior Sound through Painstaking Design and Parts Selection Intuitive, Functional Controls and Connectivity Built-in SPX Effects High-efficiency Power Amplifiers Lightweight, Practical Design Uncompromising Reliability and Safety Standards Forced Air Keeps the System Cool Even in Difficult Conditions	Advanced Features: New Compressor Circuit on the EMX512SC and EMX312SC Practical Utility Features Yamaha Speaker Processing Power Amp Mode Selector Optional Rack Mount Hardware

General Specifications

Model		EMX512SC	EMX312SC	EMX212SC
Maximum output power 1kHz, THD+N≤0.5%	4ohms	500W+500W	300W+300W	220W+220W
	8ohms/AC120V model 8ohms/AC220-240V model	350W+350W 320W+320W	190W+190W 180W+180W	130W+130W 130W+130W
Total harmonic distortion:		Less than 0.5%, +14dBu@ 20Hz-20kHz
Frequency response:		0, -3, +1dB, 20Hz-20kHz, 0dB@1kHz
Equivalent input noise 20Hz-20kHz:		-115dBu
Crosstalk/1kHz:		-65dB
Phantom voltage:		+15V, CH1-4:INPUT B, CH5/6-11/12:MIC
CH&ST CH equalizer ±15dB maximum	HIGH	10kHz (Shelving)
	MID	2.5kHz (Peaking)
	LOW	100Hz (Shelving)
Effect:		16 program, Parameter control FOOT SW (ON/OFF)
Levelmeter:		2x5 point LEDlevel meter[MAIN(L,R)] 5 point LED level meter [MONITOR]
FCL Sensitivity:		Input signal level≥-75dBu: LED on CH1-4 MIC/LINE:MIC B Input, CH5/6-11/12 MIC Input
Protection	Power Amplifier	POWER switch on/off mute DC-fault Thermal / heatsink temp≥90degrees celsius VI limiter / RL≤2ohms Clip limiter / THD≥1%, Indicator x 2
	Power supply	Thermal / heatsink temp≥100degrees celsius
Power consumption		550W	450W	350W
Dimensions	W	442.5mm
	D	284mm
	H	264mm
Weight		8kg

Input Characteristics

Output Characteristics MG10/2

Output Terminal	Input Level			Actual Source Impedance	For use with nominal	Connector
Output Terminal	Model	Nominal	Max. before clip	Actual Source Impedance	For use with nominal	Connector
Speakers [A1,A2,B1,B2]	EMX512SC	125W	500W	0.1ohms	4ohm Speakers	[A1,B1]SPEAKON [A2,B2]Phone jack
	EMX312SC	75W	300W
	EMX212S	50W	200W
Main Out [L,R]	-	+4dBu	+20dBu	600ohms	10kohm Lines	Phone jack
Effect Out:	-	+4dBu	+20dBu	600ohms	10kohm Lines	Phone jack
Monitor Out:	-	+4dBu	+20dBu	600ohms	10kohm Lines	Phone jack
REc Out (L,R)	-	-10dBu	+10dBu	600ohms	10kohm Lines	RCA Pin jack