YAMAHA
Stereo Power Amps - XP Series

  Mackie | Yamaha | Steinberg | JBL   | Sound Devices |  Azden  | SHURE  |  Sennheiser  | Tascam  | Data video Feedbacks Contact Us  |  Email Us |  Visit Us  |

Home > Yamaha > Power Amps > Stereo Power Amps > XP Series
POWER AMPS
Stereo Power Amps
TXn Series
Tn Series
PC-1N Series
XP Series
P Series
Multi-Channel Power Amps
XM Series
Distribution Power Amps
XH200
 

MIXERS

 
ADD-ON EFFECTS
 

PROCESSORS

SPEAKERS

 

INTERFACES

 
PA Systems
 
Yamaha Stereo Power Amps - XP Series



Model: XP Series
Yamaha Stereo Power Amps

With adjustable input sensitivity and voltage characteristics, these power amplifiers are ideal for installations
Concept
Features
Specifications

Five Superb Amplifiers Optimized for Installation Use

The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications
 
Concept - 5 Models from 700W to 100W
The XP power amplifier series includes 5 models with different outputs ranging from 700W (stereo, 8ohms) to 100W (stereo, 8ohms). The broad choice of power output the XP series provides means you can select a model that will ideally match the power requirements of your application. For even further flexibility all models can operate in 3 modes: in the stereo mode the two channels are independent; the parallel (dual mono) mode allows a single mono input signal to drive both channels and two independent speaker systems; and in the bridge mode, both channels work together to deliver maximum power. The environmentally friendly XP series amplifiers also use lead-free parts.
 
Model Output
XP7000 700W+700W (8ohms), compatible with 70V lines (stereo)
XP5000 500W+500W (8ohms)
XP3500 350W+350W (8ohms), compatible with 100V lines (bridged)
XP2500 250W+250W (8ohms)
XP1000 100W+100W (8ohms)
 
Features
  • Five models with power output ranging from 700W to 100W into stereo 8 ohms loads
  • Advanced circuit design and carefully selected parts deliver quality on a par with top-line models
  • Exclusive Yamaha EEEngine technology achieves unmatched efficiency
  • +4dBu/26dB/32dB gain switch for flexible level matching
  • Lightweight, compact 2U design for easy handling and installation
  • Monitor and Remote terminals for remote monitoring and control

  • Precision 1-dB/step detented attenuators
  • A selection of terminals and features for professional connectivity
  • Frequency-switchable high-pass filter for subsonic noise reduction or subwoofer matching
  • Comprehensive protection circuits, indicators and variable-speed cooling
  • Ideal matches for the DME64N/24N Digital Mixing Engines and Installation Series speakers
  • Careful Parts Selection and Design Focused on Sound Quality
  • A Perfect Blend of Performance and Value
   
General Specifications
Model XP7000 XP5000 XP3500 XP2500 XP1000
AC120V and AC240V models
Output power
1kHz THD+N=1%
* AC240V model only
8ohms 750Wx2 525WX2 390Wx2 275Wx2 135Wx2
120W*x2
4ohms 1100Wx2 750Wx2 590Wx2 390Wx2 165Wx2
155W*x2
8ohms/BRIDGE 2200W 1500W 1180W 780W 330W
310W*
Output power
20Hz-20kHz THD+N=0.1%
* AC240V model only
8ohms 700Wx2 500WX2 350Wx2 250Wx2 110Wx2
100W*x2
4ohms 950Wx2 700Wx2 450Wx2 300Wx2 125Wx2
110W*x2
8ohms/BRIDGE 1900W 1400W 900W 600W 250W
220W*
70V, RL=8ohms 625Wx2 - - - -
100V/BRIDGE,
RL=16ohms
- - 625W - -
Output power
1kHz 20ms, nonclip
2ohms 1600Wx2 1300WX2 1000Wx2 650Wx2 250Wx2
4ohms/bridge 3200W 2600W 2000W 1300W 500Wx2
AC230V model
Output power
1kHz THD+N=1%
8ohms 750Wx2 525WX2 390Wx2 275Wx2 125Wx2
4ohms 1100Wx2 750Wx2 590Wx2 390Wx2 155Wx2
8ohms/BRIDGE 2200W 1500W 1180W 780W 310W
Output power
20Hz-20kHz THD+N=0.1%
8ohms 690Wx2 500WX2 350Wx2 250Wx2 100Wx2
4ohms 950Wx2 700Wx2 435Wx2 590Wx2 110Wx2
8ohms/BRIDGE 1900W 1400W 870W 600W 220W
70V, RL=8ohms 625Wx2 - - - -
100V/BRIDGE,
RL=16ohms
- - 625W - -
Output power
1kHz 20ms, nonclip
2ohms 1600Wx2 1300WX2 925Wx2 650Wx2 250Wx2
4ohms/bridge 3200W 2600W 1850W 1300W 500Wx2
Common specifications
S/N ratio
20Hz-20kHz
104dB 103dB 102dB 100dB 96dB
Idle power consumption 35W 35W 30W 25W 20W
Power consumption 650W 500W 450W 320W 170W
Power Bandwidth
(half power THD+N=0.5%)
10Hz-40kHz
Total harmonic distortion
20Hz-20kHz, half power
0.1%
Intermodulation distortion
60Hz: 7kHz, 4:1, half power
0.1%
Frequency response
RL=8ohms, Po=1W,HPF=OFF
0, +0, -1dB
Channel separation
Half power RL=8ohms 1kHz
ATT. Max input 600ohms shunt
70dB
Residual noise
20Hz-20kHz (DIN AUDIO)
-70dB
Damping factor
8ohms, f=1kHz
300 200
Input Sensitivity
ATT. max
Rated Power 8ohms
Switch Position: +4dBu +4dBu +4dBu +4dBu +4dBu +4dBu
Switch Position: 26B +13.7dBu +12.2dBu +10.7dBu +9.2dBu +5.2dBu
Switch Position: 32dB +7.7dBu +6.2dBu +4.7dBu +3.2dBu -0.8dBu
Maximum input voltage +22dBu
Actual load impedance 20kohms (balance), 10kohms (unbalance)
control Front panel POWER switch(push on/push off), attenuator (31position) x 2
Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 1,
HPF switch (20Hz/55Hz/OFF 12dB/oct) x 2,
GAIN SELECT switch (32dB/26dB/+4dBu) x 1
Connector Input XLR-3-31 type/ch, Euroblock connector (balance)/ch
Output SPEAKON/ch, 5way binding post x 1
MONITOR/REMOTE Dsub15P x 1
indicator POWER/STANDBY x 1 (Green/Orange), SIGNAL x 2 (Green),
CLIP/LIMIT x 2 (Red),
PROTECTION x 1 (Red), TEMP x 1 (Red) heatsink temp ≥ 85 degrees celsius
Speaker protection POWER switch on/off mute,
DC-fault: power supply shutdown/return automatically
Amplifier protection Thermal (Heatsink temp ≥ 90degrees celsius): Cut the output and do not return automatically.
VI limitter (RL≤ 1ohms) : Limit the output
Power supply protection Thermal (Heatsink temp ≥ 100 degrees celsius), Power supply shutdown, (transfomer temp ≥ 130 degrees celsius) return automatically
Cooling Variable-speed fan: x 1 (Fan stop at heatsink temp ≤ 55 degrees celsius)
Dimensions(W x H x D) 480 x 88 x 456 mm
Weight 14kg 14kg 15kg 14kg 12kg

0 dBu=0.775 Vrms, Half Power=1/2 Output Power (3 dB below rated power)

 

Expandore Singapore India Vietnam 150808

Yamaha 150808
MIXERS | Digital Mixers | PM1DV2 | PM5D, PM5D-RH | M7CL-48, M7CL-32 | LS9-32, LS9-16 | DVM2000VCM | DVM1000V2 | 02R96V2 | 01V96V2 |
Analog Mixers | PM5000 | MG32/14FX, MG24/14FX | MG16/6FX, MG16/4, MG12/4FX, MG12/4 | MG10/2, MG8/2FX |
Powered Mixers | EMX5016CF | EMX5014C | EMX512SC, EMX312SC, EMX212S |
ADD-ON EFFECTS | AE011 | AE021 | AE031 | AE041 | AE051 |
PROCESSORS | Digital Mixing Engines | DME64N, DME24N | DME Satellite | ICP1 | CP4SF, CP4SW, CP1SF |
Speaker Processor | SP2060 | Digital Multi Effects | SPX2000 | Digital Reverbs | REV100 | Analog Equalizers | Q2031B |
POWER AMPS | Stereo Power Amps | TXn Series | Tn Series | PC-1N Series | XP Series | P Series |
Multi-Channel Power Amps | XM Series | Distribution Power Amps | XH200 |
SPEAKERS | Loud Speakers | Installation Series | Club V Series | BR Series | AX Series | Surface Mount Speakers | S55 | S15 |
Powered Speakers | MSR100 | MSR250 | MSR400 | Powered Subwoofer | MSR800W |
Powered Monitor Speakers | MSP STUDIO Series | HS Series | MSP5A | MSP3 | MS101II |
INTERFACES | Mini-YGDAI Cards | Mini-YGDAI Cards | Network Interfaces | NHB32-C | NAI48-ES |
Amplifier Control Devices | ACD1 | ACU16-C | A/D, D/A Converters | AD8HR | AD824 | DA824 | Mic Line Amplifier | AD8HR |
PA Systems | STAGEPAS 500 | STAGEPAS 300 | STAGEPAS 250M |
STAGEPAS 150M

JBL | LSR25P | LSR6312SP | LSR6328P | LSR6332|
Shure   | Microphones  | Performance Microphone | Recording Microphone | Installed Microphone | Broadcast Microphone |
      Wireless Systems    |
Performance Gear | SLX Wireless | ULX Wireless | UC I UHF Wireless  |
Personal Monitor Systems |
PSM 200 | PSM 400 | PSM 600 | PSM 700 |
Discussion Systems      |
ConferenceONE Standard | ConferenceONE with Intellimix |