YAMAHA
Loud Speakers - Installation Series

  Mackie | Yamaha | Steinberg | JBL   | Sound Devices | Azden |SHURE  |  Sennheiser  | Tascam  | Data video |  Feedbacks | Contact Us  |  Email Us |  Visit Us  |
Home > Yamaha > Speakers > Installation Series
SPEAKERS
Loud Speakers
Installation Series
Club V Series
BR Series
AX Series
Surface Mount Speakers
S55
S15
Powered Speakers
MSR100
MSR250
MSR400
Powered Subwoofer
MSR800W
Powered Monitor Speakers
MSP STUDIO Series
HS Series
MSP5A
MSP3
MS101II
 

MIXERS
 
ADD-ON EFFECTS
 

PROCESSORS

POWER AMPS
 

INTERFACES
 
PA Systems
 
 
Yamaha Loud Speakers - Installation Series



Model: Installation Series Speakers
Yamaha Speakers

 Favorites with discerning contractors and engineers, these speakers feature Uni-Phase design and matching sound - even between different models - for easy system setup and tuning
 
Features
Installation Series Lineup
Applications
Specifications
- 2-Way Front Main Speakers
- 3-Way Front Main Speakers
- Sub-Woofers

Optional Products:

The Quest for the Best in Pro Sound

Yamaha's new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.

This approach to design is evident in every Yamaha Commercial Audio product. The proof is in the enormous success of our groundbreaking PM1D and PM5D digital consoles, digital signal processing products, and industry-standard analog live consoles and related gear. Yamaha is simply dedicated to delivering the best sonic performance available anywhere, at any price, from system input to output. Our new Installation Series breaks new ground once again with performance and convenience that can take the sound at any venue to a higher level

Installation Series Lineup View Lineup

The Installation Series includes 16 models: 2-way models with 15 inch, 12 inch, 8 inch, and 5 inch woofers, and three types of subwoofer. The 15 inch and 12 inch models are available with 4 different coverage angles.
The speaker type and configuration are indicated by the model number.
 
Features
  • Ideal for small to medium-scale installations
  • Uniform phase response throughout the entire series
  • Models include 3-way, 2-way, large, small, high-power, medium-power, and other variations
  • A wide selection of dispersion characteristics for long-range, short-range, and long/short-range use
  • A range of standard U-bracket and array-frame hardware available for maximum installation convenience and efficiency
  • Switchable single-amp and bi-amp drive modes
  • A Range of Processing Data Available for Yamaha DME Series Processors
 
  Installation Series Lineup
   
  IF2112/64(W), IF2112/95(W), IF2112/99(W)
IF2115/64(W), IF2115/95(W), IF2115/99(W)
 

  • 12" and 15" woofer models available

  • Three horn dispersion patterns available for each model: 60 x 40 (/64), 90 x 50 (/95), and 90 x 90 (/99)

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • Trapezoidal design eliminates interference in array use

  • 3" high-frequency compression driver with 1.4" exit

  • Switchable between single-amp and bi-amp operation

  • Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame and U-bracket available

  • Parallel-wired Neutrik NL4 and barrier strip connectors
 
  IF2112/AS(W), IF2115/AS(W)
 

  • 12" and 15" woofer models available

  • 60-100 x 60 dispersion pattern

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • 3" high-frequency compression driver with 1.4" exit

  • Switchable between single-amp and bi-amp operation

  • Sixteen 10 mm-screw (M10) suspension points provided for flexible rigging

  • Pole mountable

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching U-bracket available

  • Parallel-wired two Neutrik NL4 and barrier strip connectors
 
 
  IF2112M/64(W), IF2112M/95(W), IF2112M/99(W)
IF2115M/64(W), IF2115M/95(W), IF2115M/99(W)
 

  • 12" and 15" woofer models available

  • Three horn dispersion patterns available for each model: 60 x 40 (/64), 90 x 50 (/95), and 90 x 90 (/99)

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • Trapezoidal design eliminates interference in array use

  • 1.7" high-frequency compression driver with 1.4" exit

  • Switchable between single-amp and bi-amp operation

  • Fifteen 10 mm-screw (M10) and four 8 mm-screw (M8) suspension points provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame and U-bracket available

  • Parallel-wired Neutrik NL4 and barrier strip connectors
 
  IF2208(W), IF2108(W)
 

  • 90 x 60 dispersion pattern

  • Multi-angle cabinet design enables floor monitor applications

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • 1.75" high-frequency compression driver with 1" exit

  • Eleven 10mm-screw (M10) and six 8mm-screw (M8) suspension points provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching U-bracket available

  • Parallel-wired two Neutrik NL4 and barrier strip connectors
 
 

IF2205(W)
 

  • 90 x 60 dispersion pattern

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • 1" high-frequency compression driver with 1" exit

  • Six 8mm-screw (M8) and two 6mm-screw (M6) suspension points provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Matching U-bracket available as an option

  • Barrier strip connectors
 
 
 

IF3115/64(W), IF3115/95(W)
 

  • Two horn dispersion patterns available: 60 x 40 and 90 x 50

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • 15" low-frequency driver, 8" midrange driver, and 3" high-frequency compression driver with 1.4" exit

  • Switchable between bi-amp and tri-amp operation

  • Fifteen 10mm-screw suspension points (M10) provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame available

  • Parallel-wired Neutrik NL8 and barrier strip connectors
 
 

IH2000/64(W), IH2000/95(W)
 

  • Two horn dispersion patterns available: 60 x 40 and 90 x 50

  • Horn can be rotated 90-degrees, allowing vertical or horizontal mounting

  • 8" midrange driver and 3" high-frequency compression driver with 1.4" exit

  • Switchable between single-amp and bi-amp operation

  • Fifteen 10mm-screw suspension points (M10) provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame and U-bracket available

  • Parallel-wired Neutrik NL4 and barrier strip connectors
 
  IL1115(W)
 

  • 15" low-frequency driver

  • Thirteen 10mm-screw suspension points (M10) allow flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame and U-bracket available

  • Parallel-wired Neutrik NL4 and barrier strip connectors
 
 
 

IS1215(W), IS1118(W), IS1218(W)
 

  • High power subwoofer

  • Dual woofers can be switched for discrete drive (IS1215 and IS1218)

  • Twelve 10mm-screw suspension points (M10) provided for flexible rigging

  • Durable black or white finish (can be painted to match any interior)

  • Optional matching array frame available (for IS1118 and 1218 only)

  • Parallel-wired Neutrik NL4 and barrier strip connectors
   
General Specifications
2-way front main speakers
IF2115/64(W), IF2115/95(W), IF2115/99(W), IF2115/AS
Common IF2115/64(W), IF2115/95(W), IF2115/99(W), IF2115/AS
Drive mode Passive mode Bi-amp mode
LF HF
Nominal impedance: 8ohms 8ohms 8ohms
Power rating *1: Noise 600W 700W(AES) 80W(AES)
PGM 1200W 1400W(AES) 160W(AES)
Max 2400W 2800W(AES) 320W(AES)
sensitivity
(SPL, 1W, 1m)		 97dB
SPL		 98dB
SPL		 110dB SPL (64)
108dB SPL (95, AS)
106dB SPL (99)
Peak SPL
(calculated)		 131dB
SPL		 132dB
SPL		 135dB SPL (64)
133dB SPL (95, AS)
131dB SPL (99)
Continuous SPL
(calculated)		 125dB
SPL		 126dB
SPL		 129dB SPL (64)
127dB SPL (95, AS)
125dB SPL (99)
Components LF 15" woofer, 4" voice coil
HF Rotatable constant directivity horn,
1/4" exit, 3" diaphram compression deriver

IF2112/64(W), IF2112/95(W), IF2112/99(W), IF2112/AS(W)
Common IF2112/64(W), IF2112/95(W), IF2112/99(W), IF2112/AS(W)
Drive mode Passive mode Bi-amp mode
LF HF
Nominal impedance: 8ohms 8ohms 8ohms
Power rating *2: Noise 600W 700W(AES) 80W(AES)
PGM 1200W 1400W(AES) 160W(AES)
Max 2400W 2800W(AES) 320W(AES)
sensitivity
(SPL, 1W, 1m)		 96dB
SPL		 96dB
SPL		 110dB SPL (64)
108dB SPL (95, AS)
106dB SPL (99)
Peak SPL
(calculated)		 130dB
SPL		 130dB
SPL		 135dB SPL (64)
133dB SPL (95, AS)
131dB SPL (99)
Continuous SPL
(calculated)		 124dB
SPL		 124dB
SPL		 129dB SPL (64)
127dB SPL (95, AS)
125dB SPL (99)
Components LF 12" woofer, 4" voice coil
HF Rotatable constant directivity horn,
1/4" exit, 3" diaphram compression deriver
Variations IF2115/64(W), 95(W), 99(W) IF2115/AS(W)
Frequency range (-10dB) *2: 50 Hz-20k Hz
Nominal coverage (-6dB): 60?x40 rotatable (/64)
90?x50 rotatable (/95)
90?x90 (/99)		 60-100?x60, rotatable
Connectors: 1x NL4? and barrier strip,
wired in parallel		 2x NL4 wired in parallel
Shape: 30 degrees trapezoidal
Dimensions
(W x H x D)		 mm 448x770x534 448x770x374
in 17.6x30.3x21.0 17.6x30.3x14.7
Weight: 39kg, 86lbs 35kg, 77lbs
Flying hardware: 15x M10, 4x M8 16x M10
Optional accessories: UB2115(W)
HAF2-2115(W)
HAF3-2115(W)
VAF2-2115(W)		 UB2115(W)

*1. 2hrs, IEC
*2. Bi-amp mode, Yamaha recommended DSP configuration
Variations IF2112/64(W), 95(W), 99(W) IF2112/AS(W)
Frequency range (-10dB) *2: 50 Hz-20k Hz
Nominal coverage (-6dB): 60?x40 rotatable (/64)
90?x50 rotatable (/95)
90?x90 (/99)		 60-100?x60, rotatable
Connectors: 1x NL4? and barrier strip,
wired in parallel		 2x NL4 wired in parallel
Shape: 30 degrees trapezoidal
Dimensions
(W x H x D)		 mm 378x695x454 378x695x333
in 14.9x27.4x17.9 14.9x27.4x13.1
Weight: 31kg, 68lbs 29kg, 64lbs
Flying hardware: 15x M10, 4x M8 16x M10
Optional accessories: UB2112(W)
HAF2-2112(W)
HAF3-2112(W)
VAF2-2112(W)		 UB2112(W)

*1. 2hrs, IEC
*2. Bi-amp mode, Yamaha recommended DSP configuration
IF2115M/64(W), IF2115M/95(W), IF2115M/99(W), IF2112M/64(W), IF2112M/95(W), IF2112M/99(W)
  IF2115M/64(W), 95(W), 99(W) IF2112M/64(W), 95(W), 99(W
Drive mode: Passive mode Bi-amp mode Passive mode Bi-amp mode
LF HF LF HF
Nominal impedance: 8ohms 8ohms 8ohms 8ohms 8ohms 8ohms
Power rating *1 Noise 350W 400W(AES) 60W(AES) 350W 400W (AES) 60W (AES)
PGM 700W 800W (AES) 120W (AES) 700W 800W (AES) 120W (AES)
Max 1400W 1600W (AES) 240W (AES) 1400W 1600W (AES) 240W (AES)
Sensitivity
(SPL, 1W, 1m)		 64 97dB
SPL		 98dB
SPL		 110dB SPL 95dB
SPL		 96dB
SPL		 110dB SPL
95, 99 108dB SPL 108dB SPL
Peak SPL
(calculated)		 64 128dB
SPL		 130dB
SPL		 134dB SPL 126dB
SPL		 127dB
SPL		 134dB SPL
95, 99 132dB SPL 132dB SPL
Continuous SPL
(calculated)		 64 122dB
SPL		 124dB
SPL		 128dB SPL 120dB
SPL		 121dB
SPL		 128dB SPL
95, 99 126dB SPL 126dB SPL
Components LF 15" woofer, 3 " voice coil 12" woofer, 3 " voice coil
HF Rotatable constant directivity horn, 1/4" exit, 1.7 " voice coil compression deriver
Frequency range (-10dB) *2 45 Hz-20k Hz 55 Hz-20k Hz
Nominal coverage (-6dB) 60?x40 rotatable (/64)
90?x50 rotatable (/95)
90?x90 (/99)
Connectors 1x NL4? and barrier strip,
wired in parallel
Shape 30 degrees trapezoidal
Dimensions
(W x H x D)		 mm 448x770x534 378x695x454
in 17.6x30.3x21.0 14.9x27.4x17.9
Weight 34kg, 75lbs 28kg, 61lbs
Flying hardware 15x M10, 4x M8
Optional accessories UB2115(W)
HAF2-2115(W)
HAF3-2115(W)
VAF2-2115(W)		 UB2112(W)
HAF2-2112(W)
HAF3-2112(W)
VAF2-2112(W)

*1. 2hrs, IEC
*2. Bi-amp mode, Yamaha recommended DSP configuration

IF2208(W), IF2108(W), IF2205(W)

  IF2208(W) IF2108(W) IF2205(W)
Nominal impedance: 8ohms 8ohms 8ohms
Power rating *1 Noise 200W 100W 100W
PGM 400W 200W 200W
Max 800W 400W 400W
Sensitivity (SPL, 1W, 1m) 97dB SPL 98dB SPL 110dB SPL
Peak SPL (calculated) 128dB SPL 130dB SPL 134dB SPL
Continuous SPL (calculated) 122dB SPL 124dB SPL 128dB SPL
Components LF 2x 8" woofer
2" voice coil		 8" woofer
2" voice coil		 2x 5" woofer
2" voice coil
HF Rotatable constant directivity horn,
1/4" exit, 1.7" voice coil compression deriver		 Rotatable constant directivity horn,
1" exit, 1" voice coil compression deriver
Frequency range (-10dB) *2 55 Hz-19k Hz 55 Hz-19k Hz 65 Hz-19k Hz
Nominal coverage (-6dB) 90?x60 rotatable
Connectors 2x NL4? and barrier strip,
wired in parallel		 Barrier strip
Shape Multi-angle wedge Rectangular
Dimensions
(W x H x D)		 mm 283x673x250 283x448x250 457x146x226
in 11.1x26.5x9.8 11.1x17.6x9.8 18.0x5.8x8.9
Weight 19kg, 42lbs 14kg, 31lbs 7.5kg, 17lbs
Flying hardware 11x M10, 6x M8 6x M8, 2x M6
Optional accessories UB2208(W) UB2108(W) UB2205(W)

*1. 2hrs, IEC
*2. Yamaha recommended DSP configuration
3-way front main speakers
IF3115/64(W), IF3115/95(W), IH2000/64(W), IH2000/95(W), IL1115(W)
  IF3115/64(W), 95(W) IH2000/64(W), 95(W) IL1115(W)
Specifications /
Drive mode		 LF Bi-amp Tri-amp - -
MF/HF MF HF
Nominal impedance 8ohms 8ohms 8ohms 8ohms 8ohms 8ohms 8ohms 8ohms
Power rating *1 Noise 700W 125W (AES) 125W (AES) 80W (AES) 125W (AES) 125W (AES) 80W (AES) 700W (AES)
PGM 1400W 250W (AES) 250W (AES) 160W (AES) 250W (AES) 250W (AES) 160W (AES) 1400W (AES)
Max 2800W 500W (AES) 500W (AES) 320W (AES) 500W (AES) 500W (AES) 320W (AES) 2800W (AES)
Sensitivity
(SPL, 1W, 1m)		 64 97dB
SPL		 106dB
SPL		 106dB
SPL		 110dB SPL 106dB
SPL		 106dB
SPL		 110dB SPL 97dB
SPL

 
95, 99 108dB SPL 108dB SPL
Peak SPL
(calculated)		 64 131dB
SPL		 133dB
SPL		 133dB
SPL		 135dB
SPL		 133dB
SPL		 133dB
SPL		 135dB
SPL		 131dB
SPL

 
95, 99 133dB SPL 132dB SPL
Continuous SPL
(calculated)		 64 125dB
SPL		 127dB
SPL		 127dB
SPL		 129dB
SPL		 127dB
SPL		 127dB
SPL		 129dB
SPL		 125dB
SPL

 
95, 99 125dB
SPL		 126dB
SPL
Components LH 15" woofer, 4" voice coil - 15" woofer, 3 " voice coil
MF - Rotatable constant directivity horn,
2" voice coil, 8 " deriver		 -
HF - Rotatable constant directivity horn, 1/4" exit, 1.7" voice coil compression deriver -
Frequency range (-10dB) *2 45Hz-20kHz 200Hz-20kHz 45Hz-2.5kHz
Nominal coverage (-6dB) 60?x40 rotatable (/64)
90?x50 rotatable (/95)		 -
Connectors 1x NL8, 1x NL4? and barrier strip,
wired in parallel		 1x NL4? and barrier strip,
wired in parallel
Shape 30 degrees trapezoidal
Dimensions
(W x H x D)		 mm 610x1006x600 610x591x600 610x591x600
in 24.0x39.6x23.6 24.0x23.3x23.6 24.0x23.3x23.6
Weight 64kg, 140lbs 33kg, 72lbs 38kg, 84lbs
Flying hardware 15x M10
Optional accessories HAF2-2115(W)
HAF3-3115(W)
HAF3-S18(W)
VAF2-3115(W)		 UB2000(W)
HAF2-3115(W)
HAF3-3115(W)
HAF3-S18(W)
VAF2-3115(W)		 UB2000(W)
HAF2-3115(W)
HAF3-3115(W)
HAF3-S18(W)
VAF2-3115(W)

*1. 2hrs, IEC
*2. Yamaha recommended DSP configuration

Sub woofers
IS1215(W), IS1218(W), IS1118(W)
  IS1215(W) IS1218(W) IS1118(W)
Specifications Parallel mode Discrete mode Parallel mode Discrete mode -
Nominal impedance 4ohms 8ohms x2 4ohms 8ohms x2 8ohms
Power rating *1 Noise 1400W 700W x2 1400W 700W x2 700W
PGM 2800W 1400W x2 2800W 1400W x2 1400W
Max 5600W 2800W x2 5600W 2800W x2 2800W
Sensitivity
(SPL, 1W, 1m)		 97dB SPL 100dB SPL 99dB SPL 102dB SPL 96dB SPL
Peak SPL (calculated) 134dB SPL 136dB SPL 130dB SPL
Continuous SPL (calculated) 128dB SPL 130dB SPL 124dB SPL
Components 2x 15" woofer,
4" voice coil		 2x 18" woofer,
4" voice coil		 18" woofer,
4" voice coil
Frequency range (-10dB) *2 40Hz-2.5kHz 33Hz-3kHz 33Hz-3kHz
Connectors 1x NL4? and barrier strip, wired in parallel
Shape Rectangular
Dimensions
(W x H x D)		 mm 448x883x610 610x1006x709 610x591x709
in 17.6x34.8x24.0 24.0x39.6x27.9 24.0x23.3x27.9
Weight 63kg, 139lbs 76kg, 168lbs 44kg, 97lbs
Flying hardware 12x M10
Optional accessories - HAF3-S18(W) HAF3-S18(W)

*1. 2hrs, IEC, AES
*2. Yamaha recommended DSP configuration
 

 

Expandore Singapore India Vietnam 150808

Yamaha 061009
 MIXERS | Digital Mixers | PM1DV2 | PM5D, PM5D-RH | M7CL-48, M7CL-32 | LS9-32, LS9-16 | DVM2000VCM | DVM1000V2 | 02R96V2 | 01V96V2 |
Analog Mixers | MG102C | PM5000 | MG32/14FX, MG24/14FX | MG16/6FX, MG16/4, MG12/4FX, MG12/4 | MG10/2, MG8/2FX |
 Powered Mixers | EMX5016CF | EMX5014C | EMX512SC, EMX312SC, EMX212S |
 ADD-ON EFFECTS | AE011 | AE021 | AE031 | AE041 | AE051 |
 PROCESSORS | Digital Mixing Engines | DME64N, DME24N | DME Satellite | ICP1 | CP4SF, CP4SW, CP1SF |
 Speaker Processor | SP2060 | Digital Multi Effects | SPX2000 | Digital Reverbs | REV100 | Analog Equalizers | Q2031B |
 POWER AMPS | Stereo Power Amps | TXn Series | Tn Series | PC-1N Series | XP Series | P Series |
 Multi-Channel Power Amps | XM Series | Distribution Power Amps | XH200 |
 SPEAKERS | Loud Speakers | Installation Series | Club V Series | BR Series | AX Series | Surface Mount Speakers | S55 | S15 |
 Powered Speakers | MSR100 | MSR250 | MSR400 | Powered Subwoofer | MSR800W |
 Powered Monitor Speakers | MSP STUDIO Series | HS Series | MSP5A | MSP3 | MS101II |
 INTERFACES | Mini-YGDAI Cards | Mini-YGDAI Cards | Network Interfaces | NHB32-C | NAI48-ES |
 Amplifier Control Devices | ACD1 | ACU16-C | A/D, D/A Converters | AD8HR | AD824 | DA824 | Mic Line Amplifier | AD8HR |
 PA Systems | STAGEPAS 500 | STAGEPAS 300 | STAGEPAS 250M | STAGEPAS 150M

JBL | LSR25P | LSR6312SP | LSR6328P | LSR6332|
 Shure   | Microphones  | Performance Microphone | Recording Microphone | Installed Microphone | Broadcast Microphone |
      Wireless Systems    | Performance Gear | SLX Wireless | ULX Wireless | UC I UHF Wireless  |
Personal Monitor Systems | PSM 200 | PSM 400 | PSM 600 | PSM 700 |
Discussion Systems      | ConferenceONE Standard | ConferenceONE with Intellimix |