|
|
|
Studio Microphone M 260
M260 |
|
|
Model: M 260 M260
Ribbon microphone with built-in
high-pass-filter
The M 260 is used for vocals and miking
instruments at broadcast, recording and film studios. Its flat
frequency response and natural, warm ?ribbon? sonic profile make it
a highly effective element of the digital recording process.
The hypercardioid polar pattern provides an extremely high
gain-before-feedback and elimination of lateral noise (maximum at
115°). The M 260 is equipped with a built-in high-pass-filter which
compensates the close miking effect, when the microphone is applied
very close to an instrument. The microphone also features a high
insensitivity towards magnetic stray fields and extreme
temperatures. The rugged grille protects the microphone system
against accidental hits and kicks. |

Product code : M260 
|
|
|
|
Features
M260
-
Ribbon transducer performance in a rugged, versatile configuration
-
Hypercardioid polar pattern
-
Extremely high gain before feedback
-
Fast, transient response
-
Wide, flat frequency response
-
Rugged metal casing
|
|
Technical Specifications
M260 |
| Transducer type |
Dynamic |
| Operating principle |
Pressure gradient
|
| Frequency response
(distant miking) |
40 - 18,000 Hz
|
| Polar pattern |
Hypercardioid
|
| Side attenuation |
> 20 dB at 115°
|
| Open circuit voltage at 1
kHz (0dB = 1V/Pa) |
1.2 mV/Pa ≡ -58 dBV
|
| Nominal impedance |
200 Ω |
| Load impedance |
≥ 1000 Ω
|
| Diaphragm |
Pure aluminium
|
| Case/finish |
Brass |
| Connector |
3-pin XLR male
|
| Length |
163 mm |
| Shaft diameter |
24 mm |
| Head diameter |
43,5 mm |
| Weight without cable |
approx. 230 g |
|
|
|
 |
|