|
|
|
588SDX Microphone |
|
|
Product Code: 588SDX Microphone |
The Model 588SDX is a ball-type,
dual-impedance, cardioid (unidirectional) dynamic microphone
that provides excellent voice reproduction. Its spherical grille
is a very effective wind and pop filter which is especially good
when used for closeup vocal miking. This microphone is highly
suited for speech or music pickup in schools, churches, and
meeting rooms. Its unidirectional polar pattern greatly reduces
feedback problems, permitting operation closer than usual to
loudspeakers without the annoying squeal or howl caused by
feedback. The microphone is equipped with a lockable ON/OFF
switch and an internal impedance selection socket located on the
XLR connector for switching between high and low impedance. A
slip-in swivel adapter is supplied for the convenience of
stand-mounted use.
-
588SDX with
swivel adapter and on-off switch. Cable not included.
|
|
|
Features |
- Controlled low-frequency response
combined with a smooth high-frequency rise for clear and intelligible voice
pickup
- Symmetrical cardioid pickup pattern
minimizes feedback
- Spherical grille provides effective
filtering out of breath noise and popping when used for closeup vocals, and
of wind noise when used outdoors
- Neodymium magnet for high signal-to-noise
ratio
- Shock-mounted cartridge for quiet
operation and low stand/ handling noise
- Lockable ON/OFF switch
- Dual impedance selectable by internal
socket
- Break-resistant, slip-in swivel adapter
for stand-mounted use
- Three-pin professional audio (XLR)
connector
- Tough, steel-mesh grille resists wear
from constant use and handling; die-cast handle
- Field serviceable and backed by the Shure
2-year warranty
|
|
|
Specifications |
- Type :
Dynamic (moving coil)
-
Frequency Response : 80 to
15,000 Hz
- Polar
Pattern : Cardioid (unidirectional) symmetrical about axis
-
Impedance
LO Z: Microphone rated impedance is 150 ohms (270 ohms actual) for connection to
microphone inputs rated low impedance
HI Z: Microphone impedance is "High" for connection to high-impedance microphone
inputs
-
Sensitivity (at 1,000 Hz)
Open Circuit voltage*
Lo Z: -55.5 dBV/Pa (1.7 mV)
Hi Z :-37.0 dBV/Pa*
(14.1 mV)
*1 Pascal=94 dB SPL
-
Polarity : Positive pressure on the diaphragm produces positive
voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
-
Switch : Built-in ON/OFF switch, lockplate to lock switch ON
-
Connector : Three-pin professional (male XLR) type
-
Cartridge Shock Mount : Internal rubber vibration-isolator
-
Swivel Adapter
Positive action, break-resistant, adjustable through 180 degrees, slip-out
removal for handheld use, designed for mounting on stand with 5/8-in.-27 thread
-
Case : Platinum beige enamel die casting with platinum beige steel
grille
-
Dimensions : See User Guide
-
Net Weight : 315 grams (11.1 oz)
|
|
|
