Panasonic Conference and Large Venue DLP™ Projector - PT-DW100E | PT DW100E | PTDW100E | PTDW100

Panasonic - PT-DW100E Projector (Discontinued)TDW10000E

Panasonic Conference and Large Venue DLP™ Projector - PT-DW100E

Product Code: PTDW100

A 3-chip DLP™ Projector with High Reliability and Excellent System Expandability Panasonic’s unique 4-lamp optical system gives the PT-DW100 a brightness of 10,000 lm and stable operation. The DLP™ system, which exhibits virtually no image degradation over time and a long list of unique Panasonic technologies provide outstanding images and solid reliability

• New AC Lamp and Multi-Lamp System
• Dynamic Iris
• 3D Color Management System
• Full 10-Bit Processing
• Dual Link HD-SDI Signal Support (Optional)
• Auto Cleaning Robot
• Liquid Cooling System
• Network Function
• Lamp LED indicator and Self-Diagnosis Function
• Made in Japan
• Built-in Multi-screen Support System
• Lens Shift
• Small Size and 120-VAC* Convenience
• Flexible Mounting Angle
• A Wide Selection of Lenses
• Multiple Terminal Including DVI-D and LAN Slot
• Universal Design

DLP™chip
Panel size	0.85" diagonal (16:9 aspect ratio)
Display method	DLP™ chip x 3 (R, G, B), DLP™ projection system
Pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Lamp	300 W UHM lamp x 4 (four lamp system)
Brightness	10,000 lumens (four-lamp operation mode)
Contrast ratio	5,000:1 (full on/full off, in Dynamic iris 3 mode)
Resolution	1,366 x 768 pixels (1,920 x 1,200 pixels compatible, compression mode)
Lens	Optional powered zoom/focus lenses
Screen size	70 - 600 inches, 16:9 aspect ratio (70-300 inches, 16:9 aspect ratio with the ET-D75LE5)
Lens shift*2	Vertical: ±70% (±60° with the ET-D75LE6) from center of screen, powered Horizontal: ±30% (±20° with the ET-D75LE6) from center of screen, powered
Scanning frequency
RGB	fH 15-100 kHz, fV 24-120 Hz*3 Dot clock 20-162 MHz
YPBPR (YCBCR)	480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i, 1080/50i, 1080/50p, 1080/60p
S-Video/Video	fH 15.75/15.63 kHz, fV 50/60Hz (NTSC,NTSC4.43,PAL,PAL60,PAL-N,PAL-M,SECAM)
Terminals
VIDEO IN	BNC x 1, 1.0 Vp-p
VIDEO OUT	BNC x 1, 1.0 Vp-p
S-VIDEO IN	Mini DIN 4-pin x 1
RGB1/YPBPR IN	BNC x 5
RGB2 IN	D-sub HD 15-pin x 1
DVI-D IN	DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link 480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p VGA (640 x 480) – WUXGA*4 (1,920 x 1,200), compatible with non-interlaced signals only, Dot clock: 25–162 MHz
SERIAL IN	D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
SERIAL OUT	D-sub 9-pin male x 1 (RS422 x 1)
REMOTE 1 IN	M3 jack x1 for wired remote control
REMOTE 1 OUT	M3 jack x1 for link control
REMOTE 2 IN	D-sub 9-pin female x 1 for external control (parallel)
LAN	RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
Optional board slot*6
With ET-MD77SD1 installed	SERIAL IN: BNC x 1 SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i SERIAL OUT: BNC x 1, active through
With ET-MD77SD3 installed	SERIAL IN: BNC x 1 SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p SERIAL OUT: BNC x 1, active through
With ET-MD100SD4 installed	Link A/Link B IN: BNC x 1 for each SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant, 720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit) : SMPTE 372M compliant, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/25p, 1920 x 1080/24p, 1920 x 1080/24sF, 1920 x 1080/30p Dual-link HD-SDI signal (X'Y'Z' 4:4:4 12-bit) : 2048 x 1080/24p, 2048 x 1080/24sF
With ET-MD77DV installed	DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link 480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p VGA (640 x 480) – WUXGA*4 (1,920 x 1,200), compatible with non-interlaced signals only, Dot clock: 25–162 MHz
Keystone correction range	Vertical: ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6)
Installation	Front/rear, ceiling/floor
Power cord length	9.8'' (3.0 m)
Power supply
PT-DZ12000U (North America)	120-240 VAC, 9-16A, 50/60Hz
PT-DZ12000E (Europe, Asia)	220-240 VAC, 9-16A, 50/60Hz
Power consumption
PT-DZ12000U (North America)	1,600–1,500 W (10–15 W in standby mode with fan stopped)
PT-DZ12000E (Europe, Asia)	1,500 W (15 W in standby mode with fan stopped)
Dimensions (W x H x D)	22-3/4'' x 12-19/32'' x 25-5/16'' (578 x 320 x 643 mm) (without lens)
Weight*7	77.2 lbs (35 kg) without lens
Operating temperature*8	32-113 °F (0-45°C)
Operating humidity	10-80% (no condensation)
Supplied accessories	Power cord, Wireless/wired remote control unit, Batteries for remote control (AA type for North/South America, R6/LR6 type for Europe / Asia) x 2, Eye bolts (x4), Wire rope