Sony FCB-IX11A 10x Color Exview NTSC Block Camera

Sony FCB-IX11A NTSC Block Camera
Sony FCB-IX11A NTSC Block Camera

Sony FCB-IX11A 10x Color Exview NTSC Block Camera

Product Code: FCBIX11A

Discontinued
review button

Features
• NEW! 1/4 type EXview HAD CCD
• Minimum Sensitivity of 1.5 lux
• 40x zoom ratio (10x optical, 4x digital)
• High quality image in both digital zoom and slow shutter modes
• Various AE modes including a newly added Zoom trigger and interval mode
• Various AF modes including newly added Spot AE mode to optimize the brightness within the specific area
• Expanded mode parameter for shutter speed and gain level

Sony is expanding its miniature-sized FCB camera line-up with the introduction of the FCB-IX11A color block camera. The FCB-IX11A camera features a 1/4 type EXview HAD™ CCD and high sensitivity of 1.5 lux (50 IRE). The Sony FCB-IX11A camera inherits all the outstanding features of Sony's popular FCB-IX10A camera such as the same Digital Signal Processor (DSP) for high image quality, 10x optical zoom, built-in field memory and updated firmware to enhance its operability.

Measuring only 1-9/16 x 1-13/16 x 2-5/8 inches and weighing less than 3.5 ounces, the FCB-IX11A is ideal for space-restricted applications such as pipe inspection, photo booths and document stands.

Highlights:
- NEW! 1/4 type EXview HAD CCD
- Minimum Sensitivity of 1.5 lux
- 40x zoom ratio (10x optical, 4x digital)
- High quality image in both digital zoom and slow shutter modes
- Various AE modes including a newly added Zoom trigger and interval mode
- Various AF modes including newly added Spot AE mode to optimize the brightness within the specific area
- Expanded mode parameter for shutter speed and gain level
- Various customizable settings
- Key switch control compatibility
- Lower power consumption (minimum 1.5 W)
- EEPROM backup system without battery
- Lead-free solder mounting board
- High-speed serial communication (max. 38.4 kbps) and TTL signal-level control (VISCA™ protocol) for quick command processing
- Programmable factory preset

Camera Specifications
Image Device 1/4 type Super HAD
Effective Pixels Approx 380000 pixels
Digital Zoom 4x (40x with optical zoom)
Horizontal Viewing Angle 46° (wide end) to 5.0° (tele end)
Minimum Object Distance 10 mm (wide) ~ 1000 mm (tele)
Sync System Internal
Electronic Shutter 1/1 to 1/10,000 s
White balance  Auto
ATW
Indoor
Outdoor
One-push
Manual 
Gain Auto/Manual (-3 to +28 dB, +2 dB steps)
EV Compensation -10.5 to 10.5 dB (1.5 dB steps)
Backlight Compensation On/Off
Flicker Control Auto
Focus system  Auto (Sensitivity: normal and low)
One-push AF
Manual
Infinity
Interval AF
Zoom Trigger AF 
Camera Operation / Zoom Switch Zoom Tele, Zoom Wide
Picture Effects Nega Art
Black&White
Mirror Image
Exposure Control Auto
Manual
Priority Mode
Bright
EV Compensation
Backlight Compensation
Video output Specifications
Lens Value 10x
S/N Ratio More than 50 dB
Minimum Illumination 1.5 lx
Video Output VBS: 1.0 Vp-p (sync negative)
Y/C output
Signal System NTSC 
Horizontal Resolution 470 TV Lines
Interface Specifications
Camera Control Interface VISCA Protocol (TTL/RS-232C signal level)
Baud rate: 9.6 Kb/s
19.2 Kb/s
38.4 Kb/s
1 or 2 Stop bit selectable
General Specifications
Dimensions (W x H x D) 1 9/16 x 1 13/16 x 2 5/8 inches
(39.3 x 44.8 x 65 mm)
Weight 3.4 oz (95 g)
Operating Temperature 32 to 122 °F (0 to 50 C°)
Storage Temperature -4 to 140 °F (-20 to 60 C°)
Power Consumption 1.6 W (motors inactive)
2.1 W (motors active)