|
The Anton/Bauer
Elipz System -
Also please remember to select your Cable Adapter |
|
|
 |
 |
 |
ELIPZ 10K PACKAGE:
(1) ELIPZ 10k
battery
(1) ELIPZ charger
|
EGRIPZ
HANDHELD
CAMERA SUPPORT
Specification
|
ElightZ
6-VOLT ON-CAMERA LIGHT
Specification
|
ELIPZ SYSTEM PACKAGE:
(1) ELIPZ 10k
battery ,
(1) ELIPZ charger
(1)
ElightZ,
(1) EgripZ &
(1) Cable
|
|
Less
than
USD300
 |
Less
than
USD140
|
Less
than
USD140
|
Less
than
USD550
|
| |
|
|
|
| Chose your
Elipz Cable Adapter here |
|
|
| |
|
|
ELIPZ 10K Battery |
 |
 |
|
The innovative ElipZ 10k brings unmatched
power density to handheld 7.2 volt battery operated cameras. Using the
highest capacity lithium ion cells available, the 75Wh 10k can provide
runtimes as much as 2 to 5 times that of the consumer OEM batteries
supplied with the cameras. On a 10 watt camera load, the 10k will run
over 7 1/2 hours, virtually a full shooting day! State indicator LEDs
give a simple and easy to understand and constant indication that the
battery has usable capacity (Blue) or requires charge (yellow).
Constructed of high impact polycarbonate the ELIPZ 10K innovative
under-camera mounting design allows batteries to be easily mounted and
released with one hand. A quick release "shoe" attaches to the camera
and the battery attaches directly and securely to the shoe. Lowering the
center of gravity of the camera and providing an additional handhold
without interfering with the camera operation, the lightweight ElipZ
battery actually improves the comfort and handling characteristics of
the camera. The appropriate adapter cable connects directly to the
camera battery compartment and plugs into the PowerPlug connector on the
ElipZ 10K. The ElipZ 10K mounts easily to the EgripZ support, or other
camera support using the metal 1/4 20 insert at the bottom of the
battery. The unique ElipZ power connector accepts both the camera
adapter plug and the ElightZ PowerPlug. The 10k is capable at continuous
loads of up to 6 amps - more than enough for a camera and light
simultaneously. |
|
ELIPZ 10K BATTERY
|
ELIPZ 10K BATTERY :
75Wh lithium ion battery (10,500 mAh @7.2V) - requires one of the
following cables for your specific camera type. 6.4" X 3.2" X 1.7"
(16.3 X 8.0 X 4.3 cm) 1.25lbs (567grams)
|
|
|
ELIPZ cable adapter
|
ELIPZ cable adapters:
Model SI-ADP-ELPZ. ElipZ Adapter for Sony PD-100/150/170,
DCRVX2000/2100, HDR-FX1
Model SH-ADP-ELPZ. Elipz Adapter for Sony HVR-ZI
Model CA-ADP-ELPZ. ElipZ Adapter for Canon GL1/2, XM2
Model PA-ADP-ELPZ. ElipZ Adapter for Panasonic AGHVX200,
AJDVX100/100A/100B, DVC80/30
|
|
|
ELIPZ CHARGER
|
The ElipZ battery charger weighs only 14 oz
yet has the power to charge the ELIPZ 10K in as little as 6 hours.
Simply plug the charger into the PowerPlug connector on the battery and
the charger will automatically begin its charge routines. LEDs give easy
to understand charge mode indication and features wide range (90-250VAC
50/60 Hz) mains input. Desktop design allows for easy travel and
storage.
Dimensions :
5.4" X 3.1" X 2.2" (13.7 x 7.8 x 5.5
cm) .85 lbs. (385 grams)
|
