|
|
|
BeachTek DXA-10 - Stereo
Microphone Preamplifier DXA10 |
|
|
|
|
|

Model: DXA-10
|

|
|
|

Front Control Panel
|

Back Control Panel
|
|
Stereo
Microphone Preamplifier ,
XLR Microphone to RCA Line Level Amplifier
Professional, two
channel microphone amplifier with built-in phantom power
Studio quality audio with superior headroom
Ideal for the Sony HDR-FX1 camcorder
The DXA-10 is a professional two
channel, battery-powered microphone preamplifier with built-in
phantom power. Easily connect balanced XLR microphones to
consumer audio recording gear. Ideal for use as a very quiet
front end for camcorders such as the Canon XL1s and Sony FX1,
and also MiniDisc recorders or any other device that lets you
use line levels inputs directly. The line level inputs bypass
the normally poor quality preamps in the recorder for far
superior audio quality. Has both LINE and MIC level outputs for
versatility. Studio quality audio and professional +/- 15 volt
rails for lots of headroom. The slideout drawer makes battery
replacement a snap. Rugged construction ensures years of use and
the removable belt clip makes it perfect for portable
applications where no compromise sound is required.
|
|
|
Features |
|
- Two balanced XLR microphone inputs
- Two line level RCA outputs
- Mic level stereo mini-jack output
- Dual low noise preamps with +/- 15 volt rails for
plenty of headroom
- High / Low gain settings for dynamic and condenser
type microphones
|
- 20 Hz to 20 kHz audio bandwidth
- Dual switchable 48 volt phantom power for
condenser microphones
- Easily replaceable 9 volt battery
- LED battery indicator
- Removable belt clip for easy portability
- Sturdy extruded aluminum chassis
- Superb sound
|
|
|
Specifications |
|
|
Gain: |
Switchable: HI (60 dB); LO (30 dB)
|
|
|
Frequency Response: |
20 Hz to 20 KHz, -1 dB
|
|
|
THD + N: |
less than 0.03 @ 1 kHZ
|
|
|
Signal-To-Noise Ration: |
90db @ -10 dBV output
|
|
|
Maximum output level: |
+18 dBu (RCA output)
-37 dBu (MIC output)
|
|
|
Phantom Power: |
Dual regulated 48 volt power supplies
Current to 14 mA (direct short) |
|
|
Battery type / duration: |
One standard 9 volt alkaline battery
4 hours typical (no phantom)
|
|
|
Current draw: |
120 mA (no phantom)
|
|
|
Case: |
Powder coated aluminum |
|
|
Dimensions: |
5.25" L x 3.5" W x 1.25" H |
|
|
Weight: |
14 oz. |
|
|
|
|
 |
|
|