|
Vocas DV MatteBox Accessories Page 2 |
| |
|
Below are all
available DV mattebox items listed, please see the
fit
chart which accessories you will need for your specific
camera. |
| |
|
Bars adapter
DVMB MKII. Item #0250-0150
This adapter allows the matteboxes to be used on a rails support.
Fits on supports with both 15mm. and 12mm rails. |
 |
|
12mm
Extension Rods (2pc.).
Item #0250-0040
On
some camera’s with long lenses the standard 12mm rails are too
short. They can be extended 45mm with these extenders. |
 |
|
Tripod spacer.
Item #0250-0030 If a mattebox is attached to the camera with the 12mm, or some 15mm
supports, it is impossible to attach the camera to some tripods
(i.e. some Manfrotto and Vinten tripods). For these tripods we have developed a “Tripod Spacer”. This spacer
raises the camera allowing it to attach to the tripod. |
 |
| |
|
|
Step
down adapterrings. If a MB-250 mattebox is used as a clip-on
(directly attached to
the lens front), one of these following step down rings have to be
used. Please see the
fit chart
which ring you require for your specific camera.
105mm to 95mm.
Item #0250-0110, for cylindrical lens fronts. 105mm to 80mm.
Item #0250-0120, for cylindrical lens fronts. 105mm to 93mm.
Item #0250-0141, for cylindrical lens fronts. 105mm to 97mm.
Item #0250-0142, for cylindrical lens fronts. 105mm to M37.
Item #0250-0125, for inside threaded lens
fronts. 105mm to M58. Item #0250-0130, for inside threaded lens
fronts. 105mm to M72. Item #0250-0140, for inside threaded lens
fronts. 105mm to M82. Item #0250-0143, for inside threaded lens
fronts.
Care
should be taken when using a clip-on mattebox to avoid damage to
your equipment. We do not recommend the use of a clip-on mattebox in
conjunction with a wide angle converter. Vocas is not responsible
for any damage caused to your equipment through the use of a clip-on
mattebox. |
 |
|
Flexible
adapter ring kit. Item #0320-0010
Required if a mattebox is used on a rail support to fill the gap
between the rear of the mattebox and the lens front. Six pieces of
exchangeable various diameter soft rubber rings are included. |

 |
|
12mm rail
support. Item #0350-0007
Ultra
lightweight and compact rail support for mini DV camera’s. With
12mm. rails. |
 |
|
 |
|
MBS-100, 15mm. lightweight support for
larger camera's, For
superior camera protection, optimal compatibility with Arri and
other manufacturer’s accessories such as follow focus. Type “A”
Item #0350-0001. Required
for Sony DSR-250/300/500 and JVC GYDV550/700. Type “B” Item #0350-0003. Required
for JVC GYDV500. These supports comes with 2 pair of 15mm. rails. |
 |
|
MBS-100 15mm
rail support for DV camera's.
for
superior camera protection, optimal compatibility with Arri and
other manufacturer’s accessories such as follow focus.
Type "F" Item #0350-0008.
Required
for Canon XL-1(S) and XL-2. Type "H"
Item #0350-0010. Required
for JVC GY-HD100. |
 |
|
MBS-100
“Type G3” 15mm rail support, with integrated shoulder bracket.
Item #0350-0012 Lightweight rail supports for Panasonic HVX-200.
15mm
lightweight support, for superior camera protection, optimal
compatibility with Arri and other manufacturer’s accessories such as
follow focus. |
  |
|
19mm Conversion
kit for any Pro support If the 15mm rails are removed from any Pro rail support, this kit
can be attached to the base plate very quickly , converting your
15mm rail kit to a 19mm support instantly. This kit contains: two pieces 19mm to 15mm adapter brackets, a set
of 19mm rails or 400mm in length and a balance plate which can be
attached directly to the 19mm rails, and act as a tripod attachment.
Details: Name: 19mm Conversion kit for any Pro support.
Item #0480-1000 |
 |
|
 |
|
PL Lens mount adapters This adapter allows the use of PL type lenses on cameras that use a
micro four third lens mount, such as the Panasonic AG-AF100(1). Featuring backfocus adjustment through varying thickness shim rings
and an adjustable end position for the lens locking ring. Also included with this lens mount adapter is a 15mm support bracket
which connects the adapter directly to 15mm light weight rails,
creating a rock solid attachment point for any size lens. Details:
Name: Micro four third to PL adapter including 15mm support.
Item #0900-0010 This adapter is pre shimmed to the correct back focus of the
Panasonic AG-AF100(1) camera, however a separate shim ring set is
also available.

Details: Name: Sony E-mount to PL adapter including 15mm support.
Item #0900-0015 This adapter is pre shimmed to the correct back focus of the Sony
NEX-FS100 camera, however a separate shim ring set is also
available. Details: Name: Separate Shim ring set for MFT to PL adapter.
Item #0900-0012 |
 |
|
Height adjustable
barsadapter Item #0360-0100
Adapter with
quick-lock mechanism. (MB-300 Only after serial #C7228). If a Vocas mattebox is used on a standard 15mm lightweight support
(or 15mm rails), this adapter is always needed. Name: Height adjustable bars adapter 15mm |

 |
|
15mm universal lens support Universal lens support for 15mm rails. When using large lenses Vocas recommends using a lens support to
support the higher weight of the lens. Adjustable for lenses varying from 65mm to 105mm in diameter.
Details: Name: 15mm Universal lens support.
Item #0360-0500 |

 |
|
Bars adapter
DVMB MKII. Item #0250-0150
This adapter allows the matteboxes to be used on a rails support.
Fits on supports with both 15mm. and 12mm rails. |
 |
|
12mm
Extension Rods (2pc.).
Item #0250-0040
On
some camera’s with long lenses the standard 12mm rails are too
short. They can be extended 45mm with these extenders. |
 |
|
Tripod spacer.
Item #0250-0030 If a mattebox is attached to the camera with the 12mm, or some 15mm
supports, it is impossible to attach the camera to some tripods
(i.e. some Manfrotto and Vinten tripods). For these tripods we have developed a “Tripod Spacer”. This spacer
raises the camera allowing it to attach to the tripod. |
 |
|
|
Please
refer your camera ring size by the following form |
|
Camera Model by Brand |
Lens Ring Size |
|
Camera Model by Brand |
Lens Ring Size |
|
Sony |
|
Panasonic |
|
|
Sony DCR-VX1000 |
52
mm |
Panasonic AG-EZ1 |
52 mm |
|
Sony DCR-VX9000 |
52
mm |
Panasonic AG-DVX100 |
72 mm |
|
Sony DSR-200 |
52
mm |
Panasonic AG-DVX102 |
72 mm |
|
Sony DSR-PD100 |
52
mm |
Panasonic AG-HMC150 |
72 mm |
|
Sony TRV-900 |
52
mm |
Panasonic AG-HPX170 |
72 mm |
|
Sony DCR-VX2000 |
58
mm |
Panasonic AG-HPX171E |
72 mm |
|
Sony DSR-250 |
58
mm |
Panasonic AG-HVX200 |
82 mm |
|
Sony DSR-PD150 |
58
mm |
Panasonic AG-HVX203 |
82 mm |
|
Sony DSR-PD170 |
58
mm |
Panasonic AG-HVX201 |
82 mm |
|
Sony HVR-V1 |
62
mm |
|
|
Sony HDR-FX1E |
72
mm |
Camera Model by Brand |
Lens Ring Size |
|
Sony HVR-S270 |
72
mm |
JVC |
|
|
Sony HVR-Z1 |
72
mm |
JVC GY-DV300 (lens 14x5.6) |
52 mm |
|
Sony HVR-Z5 |
72
mm |
JVC GY-DV550 (lens 14x7.3) |
62 mm |
|
Sony HVR-Z7 |
72
mm |
JVC GY-DV5100 |
82 mm |
|
Sony PMW-EX1 |
77
mm |
JVC GY-HD100 |
82 mm |
|
Sony PMW-EX3 |
77
mm |
JVC GY-HD101 |
82 mm |
|
|
JVC GY-HD110 |
82 mm |
|
Camera Model by Brand |
Lens Ring Size |
JVC GY-HD200B (lens 126x5.5) |
82 mm |
|
Canon |
|
JVC GY-HD200U (lens 12x5.5) |
82 mm |
|
Canon GL-1 |
58
mm |
JVC GY-HD250 (lens 16x5.5) |
82 mm |
|
Canon GL-2 |
58
mm |
JVC GY-HD251 (lens 16x5.5) |
82 mm |
|
Canon XM-1 |
58
mm |
|
|
Canon XM-2 |
58
mm |
|
Canon XH-A1 |
72
mm |
|
Canon XH-G1 |
72
mm |
|
Canon XL-1 |
72
mm |
|
Canon XL-2 |
72
mm |
|
Canon XL-H1 |
72
mm |
|
Canon XL-H1A |
72
mm |
|
 |
|