Vocas ENG mattebox accessories

French flags In some extreme situations this flag is necessary to prevent lens flare. We have the following available: French flag standard (31cm wide). Item #0330-0001 French flag wide (42cm wide). Item #0330-0002 Foldable wide French flag (48cm wide). Item #0330-0003

Side flag kits For best protection against lens flair we recommend using a side flag kit. MB-315/325 side flag kit Item #0340-0001, which consists of an extra large top flag, two side flags and two friction hinges. MB-350 side flag kit Item #0340-0002, which consists of two side flags and two friction hinges.

Filter frames. Filter frame 3"x3". Item #0310-0008 Filter frame 4"x4". Item #0310-0001 Filter frame 4,5"x4,5" Item #0310-0002 Filter frame 4"x6". Item #0310-0003 Filter frame 4"x5,65" (Panavision size). Item #0310-0004 Filter frame 4,5"x6" Item #0310-0005 Filter frame 4"x5" Item #0310-0007 4,5"x4,5" Polarizer filter Item #0380-0001 Filter slot size reducer Items #0310-0009, These inserts allow 109mm wide filter frames from other brands to be used in the rotatable filter slots of the MB-325 and MB-350. Note: 2pc. of 4”x4” filter frame are included in the standard mattebox kits.

Step-down adapterrings If a Broadcast mattebox is used as a clip-on (directly attached to the lens front), one of these following step down rings have to be used. M37 Item #0250-0125 M58 Item #0250-0130 M72 Item #0250-0140 M82 Item #0250-0143 80mm Item #0250-0120 85mm Item #0320-0001 86mm Item #0320-0002 92mm Item #0320-0030 93mm Item #0250-0141 95mm Item #0320-0003 95mm. (Canon 11x4,5 only) Item #0320-0008 95mm. (Fujinon 10x4,8 / 13x4,5 only) Item #0320-0021 97mm Item #0250-0142 98mm Item #0320-0004 100mm Item #0320-0020 Care should be taken when using a clip-on mattebox to avoid damage to your equipment. We do not recommend the use of a clip-on mattebox in conjunction with a wide angle converter. Vocas is not responsible for any damage caused to your equipment through the use of a clip-on mattebox. Please choose your adapterring which you require for your specific lens

Flexible adapter ring kit. (54-95mm) Item #0320-0009 This kit contains several exchangeable flexible soft rubber rings. These rings do not allow the mattebox to be used as clip-on. The Mattebox has to be supported by a Mattebox support.

MBS-100, 15mm lightweight support For superior camera protection, optimal compatibility with Arri and other accessories such as a follow focus. Type “A” Item #0350-0001. Required for Sony DSR-250/300/500 and JVC GYDV550/700. Type “B” Item #0350-0003. Required for JVC GYDV500. These supports comes with 2 pair of 15mm. rails. (170mm and 215mm)

15 mm barsadapter Item #0360-0001 Adapter with quick-lock mechanism. (MB-300 Only after serial #C7228). If a Vocas MB-3XX mattebox is used on a standard 15mm lightweight support (or 15mm rails), this adapter is always needed

Z-shaped bar kit Item #0350-0020 When a MBS-100 mattebox support is used, on some lenses the zoom remote connector becomes impossible to reach. For these lenses this kit is needed.

Mask kit Item #0250-0040 Set of 8 pieces mask 4:3 and 16:9 These masks have the exact same outside dimension as a standard Panavision filter (4"x5,65"). In combination of a 4"x5,65" filter frame these masks can also be used in every other mattebox. In the MB-350 these masks can be placed directly in the hood of the mattebox, without the need for an additional filter frame.