Azden Pro Audio System - UHF Wireless System 200ULH


	AZDEN 200ULX Dual 63-Channel On-Camera UHF Wireless Plug-In System 200ULX

	The 200ULH is a complete dual-channel wireless system that consists of the 200UPR receiver and one each 10HT handheld transmitter and 10BT bodypack transmitter. The new 200UPR receiver allows the use of two wireless transmitters at the same time. It features twin-antennas, a 3.5mm -64dbB 2-channel mic level output jack, two recessed On/Off switches, two Power On/ Signal Received LED and 2 sets of channel selectors to set the desired frequency for each receiver. Using crystal-control and PLL synthesis the 200UPR operates for better than 8 hours on 6 "AA" batteries. The receiver comes with a "hot-shoe" mount, a 2-channel 3.5mm to 3.5mm output cable and a 2-channel 3.5mm to twin XLR cable. Included is one 10HT UHF handheld microphone which is designed to work seamlessly with the on-camera 200UPR receiver. The new mic features Azden’s special surface coating to reduce handling noise. Using an electret-condenser unidirectional element, the 10HT is designed with low-noise PLL circuitry to allow the user to select any one of 63 UHF channels to assure interference free reception in the 794-806MHz range. The new microphone uses two commonly available alkaline “AA” batteries to operate for better than 8 hours. Also included is the10BT body-pack transmitter supplied with the Azden EX-503 omni-directional lapel microphone and a metal belt-clip. In addition to the 3.5mm mic input jack the transmitter has a Power On switch with an associated LED a separate Standby switch for audio muting and a set of channel selector switches. The 10BT runs better than 8 hours on a single 9V battery. 200UPR Receiver Frequency Range UHF 63-Channel Selectable (793.750 – 805.875MHz) Type of Reception 2 Channel Receiver Oscillator PLL Synthesized RF Squelch Level 13dBµV Frequency Response 50Hz – 15kHz S/N Ratio >70dB “A” Weighted Audio Distortion <1% @ 1kHz Operating Temp. 0°C – 45°C (32°F – 113°F) MIC Out -64dBm @ 600 W - 3.5mm Mini-Jack Power Requirement 6 – 1.5V “AA” Alkaline Batteries or 12VDC @ 200mA - 6 – 8 Hours Dimensions 105W x 105H x 35D mm (4.13W x 4.13H x 1.38D inches) Weight Approx. 490g Including Battery (17.28oz) 10HT Transmitter Frequency Range UHF 63-Channel Selectable (793.750 – 805.875MHz) Oscillator PLL Synthesized RF Power 10mW Frequency Response 50Hz – 12kHz Max. Deviation ±75kHz @ 1kHz Modulation, MIC Input –11dBm S/N Ratio >70dB “A” Weighted Audio Distortion <1% @ 1kHz MIC Element ECM MIC Sensitivity ±5kHz @ -46dBm (0dBm+0.775V) Operating Temp. 0°C – 50°C (32°F – 122°F) Power Requirement 2 – 1.5V “AA” Alkaline Batteries – 8-10 Hours Dimensions 230H x Ø 44D mm (9.05H x 1.73D inches) Weight Approx. 130g Including Batteries (4.58oz) 10BT Transmitter Frequency Range UHF 63-Channel Selectable (793.750 – 805.875MHz) Oscillator PLL Synthesized RF Power 10mW Frequency Response 50Hz – 15kHz Max. Deviation ±75kHz @ 1kHz Modulation, MIC Input –11dBm S/N Ratio >70dB “A” Weighted Audio Distortion <1% @ 1kHz MIC Sensitivity ±40kHz @ -22dBm MIC Input (0dBm+0.775V) - 3.5mm Mini Jack Operating Temp. 0°C – 50°C (32°F – 122°F) Power Requirement 1 – 9V Alkaline Battery - 6 – 8 Hour Dimensions 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches) Weight Approx. 120g Including Battery (4.23oz)