|
The 511LTLA system consist of:
511DRHx1 , 51BTx , AZM-T(H)
511DRH
Technical Specs:
Frequency Range: UHF 63 ch. (793.875-805.875MHz)
Frequency Response: 20HZ to 20KHz
Audio Distortion: less than 1.0% ± 15K deviation
Dynamic Range: better than 100dB
S/N Ratio: better than 95dB
Operating Temperatures: 0° C to 45° C
Operating Range: 100m under ideal conditions
Oscillator: PLL synthesized
Tone Squelch Frequency: 32.768KHz
Diversity Type: True Space Diversity
Receiver Type: Super Heterodyne, PLL Synthesized
Image Rejection: Better than 60dB
Reception Sensitivity: Better than 16dBµV
Reception Selectivity: +/- 150KHz
Audio Output Adj. Range: -30dB, ctr 0dB, max +6dB
Audio Output Impedance: 2.2 k ohms unbal., 660 ohms bal.
Power Requirements: 12V DC 300mA
Dimensions: 215(W) x 210(D) x 44(H) mm - (8.46" x 8.27" x 1.73")
Weight: 1.15kg (2.53lb)
51BT
Technical Specs:
Frequency Range: UHF 63 ch. (793-806MHz)
Frequency Response: 20HZ to 20KHz
Audio Distortion: less than 1.0% @± 15K deviation
Dynamic Range: better than 100dB
S/N Ratio: better than 95dB
Operating Temperatures: 0° C to 45° C
Operating Range: 100m under ideal conditions
Oscillator: PLL synthesized
Tone Squelch Frequency: 32.768KHz
Type of Emission: FM
Antenna: External Antenna
Pre-emphasis: 50 Micro Sec.
MAX Input Level: 0dBm - 10dBm
Microphone Unit: Lav or Headset
RF Output Power: 15mW
Input Impedance: 2.2(Mic.), 680(MP-1)
Audio Adj. Range: -63dBm ~ -18dBm
Battery: 9V
AZM-T(H)
Technical Specs:
Microphone and clip are designed
to minimize
the appearance of the mic and hide
the cable when wearing it. This unique
cable-design was developed by NHK and
Azden who hold the Patent.
Microphone power can be supplied from
the AZM-T/P power supply or from the
separate source, such as RamsaR body
pack transmitter
Connector is changeable to mini jack or
HIROSER connector. |
