|
|
|
SLX Wireless
System |
|
|
Product Code: SLX |
Smart, Hard-Working Wireless.
Sound installations and working bands need powerful wireless
tools that can be set up quickly and used confidently. The
rugged SLX® UHF Wireless Systems exceed these demands with
innovative setup features such as auto frequency scan with
transmitter setup, exceptional wireless clarity, and legendary
Shure microphones. |
|
|
Features |
Supporting 20
compatible systems across multiple UHF frequency bands, SLX
smoothly integrates into houses of worship, lecture halls,
conference rooms, and mobile gear cases.
SLX Wireless Systems feature the Shure patented Audio Reference
Companding for clear sound beyond the limits of conventional
wireless technology. |
|
|
Specifications |
| Band |
Range |
Transmitter Output |
| G4 |
470–494 MHz |
30 mW |
| G5 |
494–518 MHz |
30 mW |
| H5 |
518–542 MHz |
30 mW |
| J3 |
572–596 MHz |
30 mW |
| L4 |
638–662 MHz |
30 mW |
| P4 |
702–726 MHz |
30 mW |
| R13 |
794-806 MHz |
20 mW |
| R5 |
800–820 MHz |
20 mW |
| S6 |
838–865 MHz |
10 mW |
| JB |
806–810 MHz |
10 mW |
| Q4 |
740–752 MHz |
10 mW |
- NOTE: This Radio
apparatus may be capable of operating on some frequencies
not authorized in your region. Please contact your national
authority to obtain information on authorized frequencies
for wireless microphone products in your region.
- Operating Range Under
Typical Conditions
100m (300 ft.) Note: actual range depends on RF signal
absorption, reflection, and interference
- Audio Frequency Response
(+/– 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
- Total Harmonic Distortion
(ref. +/– 38 kHz deviation, 1 kHz tone) : 0.5%, typical
- Dynamic Range : >100 dB
A-weighted
- Operating Temperature
Range
–18°C (0°F) to +57°C (+135°F)
Note: battery characteristics may limit this range
- Transmitter Audio
Polarity
Positive pressure on microphone diaphragm (or positive
voltage applied to tip of WA302 phone plug) produces
positive voltage on pin 2 (with respect to pin 3 of low
impedance output) and the tip of the high impedance 1/4-inch
output.
SLX1 Bodypack Transmitter
- Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
- Gain Adjustment Range :
30dB
- Input Impedance : 1 MΩ
- RF Transmitter Output :
30 mW maximum (dependent on applicable country regulations)
- Dimensions : 108 mm H x
64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
- Weight : 81 grams (3 oz.)
without batteries
- Housing : Molded ABS case
- Power Requirements : 2
“AA” size alkaline or rechargeable batteries
- Battery Life : >8 hours
(alkaline)
SLX2 Handheld Transmitter
- Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
- Gain Adjustment Range :
10dB
- RF Transmitter Output :
30 mW maximum (dependent on applicable country regulations)
- Dimensions (including
SM58 cartridge) : 254 mm x 51 mm dia. (10 x 2 in.)
- Weight : 290 grams (10.2
oz.) without batteries
- Housing : Molded PC/ABS
handle and battery cup
- Power Requirements : 2
“AA” size alkaline or rechargeable batteries
- Battery Life : >8 hours
(alkaline)
SLX4 Receiver
- Dimensions : 42 mm H x
197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
- Weight : 816 g (1 lb. 13
oz.)
- Housing : Galvanized
steel
- Audio Output Level (ref.
+/– 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –13 dBV
1/4 inch connector (into 3000 Ω load): –2 dBV
- Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
- XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
- Sensitivity : –105 dBm
for 12 dB SINAD, typical
- Image Rejection : >70 dB,
typical
- Power Requirements :
12–18 Vdc at 150 mA, supplied by external power supply
|
|
