Expandore-TASCAM X-9

Cassette

130

202 MKIII

302 MKII

322

112 MKII

Workstation

SX-1

Multitrack

MMR-8

MX-2424

DS-D98

DA-78HR

RC-898

RC-828

RC-808

2488

424 MKIII

Porta-02 MkII

MF-P01

Pocketstudio 5

Mixers

AV-452

DM-24

DS-M7.1

TASCAM DJ

CD-X1500

CD-X1700

TT-M1

X-9

X-17

X-15

DAT

DA-45HR

DA-P1

CD-BT1

CD-GT1

CD-VT1

CC-222

CD-D1x4

CD-RW402

CD-RW2000

CD-A500

CD-A630

CD-A700

Converters

IF-TAD

Preamplifiers

LA-40 MkII

LA-80 / LA-81

Discontinued Models

CD-160

CD-450

CD-RW750

Cassette

102 MKII

122 MKIII

Multitrack

414 MKII

Converters

IF-AE8HR

IF-DA8

MA-AD8

Preamplifiers

MA-8

MH-40 MkII

MX-4

TASCAM X-9 Professional DJ Digital Mixer
	X-9 Professional DJ Digital Mixer
Main features
Inputs/PGM 4 switchable line and phono inputs 4 stereo channels (PGM 1–4) 3-band full parametric EQ (-40dB to +12dB gain) on each PGM, up to 100 EQ patterns storable Balance control on each PGM Flexible input selection: Input 1 switchable to PGM 1 and PGM 4 in parallel, Input 2 switchable to PGM 2 and 3 in parallel, enables DJ to mix same signal with different EQ or effect settings 2 coaxial digital inputs on inputs 1 and 2 1 separate XLR balanced microphone input with 2-band EQ (analogue) and TALK OVER function (reduces all other signals by 20dB) Faders 45mm faders (PGM, MASTER, CROSS) 3-stage adjustable PGM fader curve PGM fader reverse function Adjustable Cross Fader curve Cross Fader reverse function Low/Mid/High cut (-40dB) switches on both Cross Fader sides Output/Monitor Balanced XLR master output (with attenuator) Unbalanced RCA master output (with attenuator, pre/post selectable) Coaxial digital master output (pre/post selectable) Balance control on master output 3-stage adjustable EQ (selection of HI/LO/HI & LO boost/Off in the menu) Balance control between cue and post master fader signals Stereo/Mono Split function assigns mono cue signal to left channel and master signals (post fader) to right channel Booth output for pre-listening monitor (fixed pre master fader) Headphone outputs on front and top panels Effector and Sampler 2 built-in digital effectors (reverb, delay, echo, flanger, auto pan, pitch control, transformer, low pass filter); Effect 1 assignable to MIC, PGM1, PGM3, Sampler 1; Effect 2 assignable to PGM2, PGM4, MASTER, Sampler 2 Up to 30 effect patterns storable 2 built-in samplers (8 sec sampling time each) with ±100% pitch control and level control; Sampler 1 assignable to MIC, PGM 1, or PGM 3; Sampler 2 assignable to PGM 2, PGM 4, or MASTER; Single, Reverse, Loop, and Reverse Loop functions Others 24-bit A/D and D/A converters Fader Start function with individual start switches on PGM 1–4 (4 separate fader start connectors) and Cross Fader (assignable to fader start connector 1–4 or sampler) 1 assignable stereo send/return for external effect device; assignable to MIC, PGM 1–4, or MASTER; switchable on/off 2 assignable foot switches for built-in effect (on/off), built-in sampler (start/stop) or Cross Fader (A side/B side) Cue function for Mic, PGM 1–4, samplers (pre fader fixed), and master (post fader fixed) 15 dots level meter on each PGM and master (release and peak hold time adjustable)
Specifications
Analogue input and output terminals
LINE IN (PGM1-4)	RCA jack, unbalanced (x2)
Minimum input level	-16dBV
Input impedance	47kohm
PHONO IN (PGM1-4)	RCA jack, unbalanced (x2)
Minimum input level	-54dBV
Input impedance	47kohm
MIC IN	XLR, balanced
Minimum input level	-60dBV
Input impedance	2.7kohm
MASTER OUT (BALANCED)	XLR, balanced (x2)
Nominal output level	+4dBu
Output impedance	75ohm
MASTER OUT (UNBALANCED)	RCA jack, unbalanced (x2)
Nominal output level	-10dBV
Output impedance	1kohm
BOOTH OUT	RCA jack, unbalanced (x2)
Nominal output level	-10dBV
Output impedance	1kohm
SEND (L, R)	1/4" phone jack, unbalanced (x2)
Nominal output level	-10dBV
Output impedance	1kohm
RETURN (L, R)	1/4" phone jack, unbalanced (x2)
Nominal input level	-10dBV
Input impedance	22kohm
PHONES	1/4" stereo phone jack
Output power	30mW+30mW, 2 outputs total, at 32ohm)

Digital input and output terminals
DIGITAL IN (1, 2)	Coaxial (x2)
Format	Conforms to IEC60958 TYPE I/II (auto detect)
DIGITAL OUT	Coaxial
Format	IEC60958 TYPE II (SPDIF)
Equalizers
EQ (PGM1-4)
HIGH	6kHz – 20kHz, -40dB – +12dB
MID	200Hz – 6kHz, -40dB – +12dB
LOW	20Hz – 200Hz, -40dB – +12dB
EQ (MIC)
HIGH	10kHz, -12dB – +12dB
LOW	100Hz, -12dB – +12dB
Effectors
REVERB, DELAY, ECHO
Level	0 – 100
Time	0 – 3,500ms
FLANGER, AUTO PAN, TRANSFORM, LOW PASS FILTER
Level	0 – 100
Time	10 – 16,000ms
PITCH CONTROL	±100%
LIBRARY	Up to 30 patterns storable for each effect
General
Frequency Response
LINE IN	20Hz – 20KHz, ±2.0dB
PHONO IN	20Hz – 20KHz, ±2.0dB
MIC IN	20Hz – 20KHz, ±2.0dB
Signal-to-noise ratio
LINE IN	84dB (IHF A WTD)
PHONO IN	77dB (IHF A WTD)
MIC IN	70dB (IHF A WTD)
Total harmonic distortion
LINE IN	<0.025%
PHONO IN	<0.030%
MIC IN	<0.040%
Crosstalk	<-70dB (@1KHz)
Power supply and other specifications
Power requirements	120VAC/60Hz, 230VAC/50Hz
Power consumption	42W
Dimensions (W x D x H)	320 x 354 x 87mm
Weight	7.0kg