|
MIXERS |
|
Digital Mixers |
|
PM1DV2 |
|
PM5D, PM5D-RH
|
|
M7CL-48, M7CL-32 |
|
LS9-32,
LS9-16 |
|
DVM2000VCM |
|
DVM1000V2 |
|
02R96V2 |
|
01V96V2 |
|
Analog Mixers |
|
MG102C |
|
PM5000 |
|
MG32/14FX,
MG24/14FX |
|
MG16/6FX, MG16/4,
MG12/4FX, MG12/4 |
|
MG10/2, MG8/2FX |
|
Powered Mixers |
|
EMX5016CF |
|
EMX5014C |
|
EMX512SC, EMX312SC,
EMX212S |
|
|
|
ADD-ON
EFFECTS |
|
|
|
PROCESSORS |
|
|
|
POWER AMPS |
|
|
|
SPEAKERS |
|
|
|
INTERFACES |
|
|
|
PA
Systems |
|
|
|
|
Yamaha Powered Mixer -
EMX5014C |
|
|
Model:
EMX5014C
Yamaha Powered Mixer
Console-type powered
mixer delivering a
solid 500 stereo
watts plus effects,
graphic EQ, and
compressor built in |
Features
Specifications
Optional Accessories:
|
|
The new EMX5014C
Console-style Powered Mixer - Lightweight, Portable, and a Stunning
Performer
The EMX5014C is an all-in-one powered mixer that packs
high-performance mixer, power amplifiers, graphic equalizers, and
digital effects unit into a compact, portable console-style unit.
It's rack-mountable for easy portability, and is suited for a broad
range of uses. The EMX5014C replaces the highly regarded EMX5000-12
with even further upgraded audio quality and mixer functionality.
Significant overall utility and design refinements have also been
implemented
|
|
Features |
- All-in-one for Easy Operation
and Fast Setup
- Superior Sound through
Painstaking Design and Parts Selection
- Intuitive, Functional
Controls and Connectivity
- Built-in SPX Effects
- High-efficiency Power
Amplifiers
- Lightweight, Practical Design
- Uncompromising Reliability
and Safety Standards
|
- Forced Air Keeps the System
Cool Even in Difficult Conditions
- Six Advanced Analog
Compressors Included
- Practical Utility Features
- Yamaha Speaker Processing
- Power Amp Mode Selector
- Optional Rack Mount Hardware
|
 |
|
|
General
Specifications |
|
Maximum output power |
500W + 500W (4ohms),
370W + 370W (8ohms/ AC100V model)
350W + 350W (8ohms/ AC120V model)
320W + 320W (8ohms/ AC220-240V model)
@1kHz, THD+N≤0.5% |
Total harmonic distortion
(THD+N) @ 20-20kHz: |
Less than 0.3%, +14dBu output into
600ohms |
Frequency response
GAIN=Minimum, PAD=OFF: |
0, +0, -3dB, 20Hz-20kHz, 0dB @1kHz |
Equivalent input noise
GAIN=Maximum, 20-20kHz: |
-128dBu |
Crosstalk
@ 1kHz: |
-68dB, adjacent inputs
-68dB, input to output |
|
Phantom voltage: |
+48V on CH1-6,7/8,9/10 |
Channel equalizer
+15,-15dB Maximum : |
HIGH: 10kHz (Shelving)
MID(MONO): 250Hz-5kHz (Peaking)
MID(ST) 2.5kHz (Peaking)
LOW: 100Hz (Shelving) |
|
Channel peak indicator: |
LED turns on when post EQ signal
reaches -3dB below clipping |
|
Channel signal indicator: |
LED turns on when post EQ signal
reaches -10dB |
|
FCL indicator: |
input level: -75dB |
LED level meter
(ST, PFL/AFL): |
2*12 points LED meter
(PEAK,+5,+3,+1,0,-1,-3,-5,-7,-10,-15,-20 dB)
PEAK lights if the signal comes within 3 dB of the clipping level. |
Graphic equalizer
(ST OUT): |
9 Band
(63,125,250,500,1k,2k,4k,8k,16k Hz), +12/-12 dB Maximum |
|
Effect |
16 programs, Parameter control
Foot switch(FC5:Option) Digital Effect ON/OFF |
|
Power amplifier protection |
POWER switch on/off mute
DC-fault
Thermal / heatsink temp≥90 & degrees celsius
Vl limiter / RL≤2 ohms
Clip limiter / THD≥1%, Indicator x 2 |
|
Power supply protection: |
Thermal / heatsink temp≥100 degrees
celsius |
|
Cooling: |
Variable-speed fan ( x 2) |
|
Power consumption: |
Japan:AC100V 50/60Hz, 500W
North America:AC120V, 60Hz, 500W
Other Areas:AC220-240V, 50/60Hz, 500W |
|
Dimensions (W x H x D): |
444 x 155 x 493 mm |
|
Weight: |
10.5kg |
|
|
|
Input Terminal |
PAD |
Gain |
Input Level |
Actual Load Impedance |
For use with nominal |
Connector |
|
Sensitivity |
Nominal |
Max. before clip |
|
CH Input A 1-6 |
0dB |
-60dB |
-80dBu |
-60dBu |
-40dBu |
3kohms |
50-600 ohm Mics |
XLR-3-31 type *3 |
|
-16dB |
-36dBu |
-16dBu |
+4dBu |
|
26dB |
-34dB |
-54dBu |
-34dBu |
-14dBu |
|
+10dB |
-10dBu |
+10dBu |
+30dBu |
|
CH Input B 1-6 |
0dB |
-60dB |
-80dBu |
-60dBu |
-40dBu |
10kohms |
600ohm Lines |
TRS phone jack |
|
-16dB |
-36dBu |
-16dBu |
+4dBu |
|
26dB |
-34dB |
-54dBu |
-34dBu |
-14dBu |
|
+10dB |
-10dBu |
+10dBu |
+30dBu |
ST CH Input
7/8-9/10 |
-60dB |
-80dBu |
-60dBu |
-40dBu |
3kohms |
50-600 ohm Mics |
XLR-3-31 type |
|
-16dB |
-36dBu |
-16dBu |
-10dBu |
|
-34dB |
-54dBu |
-34dBu |
-14dBu |
10kohms |
600 ohm Mics |
Phone jack |
|
+10dB |
-10dBu |
+10dBu |
+30dBu |
ST CH Input
11/12-13/14 |
-34dB |
-54dBu |
-34dBu |
-14dBu |
10kohms |
600 ohm Mics |
Phone jack,
RCA pin jack |
|
+10dB |
-10dBu |
+10dBu |
+30dBu |
|
CH INSERT IN (1-6) |
-20dBu |
0dBu |
+20dBu |
10kohms |
600 ohm Mics |
Phone jack |
|
* 0dBu= 0.775Vrms |
|
|
|
Output Characteristics MG10/2 |
|
Output Termianl |
Actual Source Impedance |
For use with nominal |
Output Level |
Connector |
|
Nominal |
Max. before clip |
|
ST Out [L, R] |
150ohms |
600ohms Lines |
+4dBu |
+20dBu |
TRS phone jack |
|
ST SUB Out [L,R] |
150ohms |
600ohms Lines |
+4dBu |
+20dBu |
TRS phone jack |
|
AUX SEND 1,2 |
150ohms |
600ohms Lines |
+4dBu |
+20dBu |
TRS phone jack |
|
Effect Send |
150ohms |
600ohms Lines |
+4dBu |
+20dBu |
TRS phone jack |
|
CH Insert Out (CH1-6) |
600ohms |
10kohms Lines |
0dBu |
+20dBu |
TRS phone jack |
|
REC OUT [L, R] |
600ohms |
10kohms Lines |
-10dBV |
+10dBV |
RCA Pin jack |
|
Phones (L,R) |
100ohms |
8ohm/40ohms Lines |
1mW/3mW |
20mW/75mW |
ST phone jack |
|
Speakers Out |
0.1ohms |
4ohms Speakers |
125mW |
500W |
SPEAKON
Phone jack |
* 0dBu=0.775Vrms. 0dBV =1.0Vrms
|
|
|
|
|
