Sony Video Monitor

Monitors

PVM-96E

PVM9L2

PVM4B1E

PVM14L1

PVM14L2

PVM14L4

PVM14L5

PVM14N5E

PVM14N6E

PVM20L2

PVM20N5E

PVM20N6E

PVM9045QM

Accessories

BKM-120D

BKM-129X

BKM-150CP

Others/ Switchers

DSR-1P

UVW-1600P

UVW-1800P

PVE500

New Switcher

PVM-14L4 Color Video Monitor	PVM-14L4 inquiry">


Features 14-inch color video monitor HR Trinitron CRT provides a high resolution of 800 TV lines EBU standard phosphors Beam current feedback circuit for stable color reproduction Composite, Y/C, RGB and component (Y/R-Y/B-Y) inputs available as standard 1 slot available for optional input adaptors Accepts external sync Auto setup for chroma, phase and white balance Color temperature D65, D93 or user preset selectable Built-in H/V delay, underscan, blue only, mono and 3 color tally functions Aspect ratio 4:3 and 16:9 switchable 4:3 area marker Serial and parallel remote control capability Auto/manual degaussing *Mountable into an EIA standard rack with the optional rack mounting bracket 13 1/8-inch viewable area, measured diagonally. Supplied Accessories AC Power Cord (1) Operation Manual (1) Optional Accessories BKM-150CP SDTI-CP/SDI Input Adaptor BKM-120D SDI 4:2:2 Input Adaptor BKM-129X Analog Component Input Adaptor BKM-14L Auto Setup Probe MB-521 Mounting Bracket BKM-140M 16:9 Mask
Specifications General Color system: PAL, NTSC, SECAM, NTSC4.43 Power requirements: AC 100 to 240 V, 50/60 Hz Power consumption: 0.9 to 0.5 A, 90 W (with options: 1.0 to 0.6 A, 95 W) Operating temperature: 0 to 35 °C (32 to 95 °F) Storage temperature: -10 to 40 °C (14 to 104 °F) Humidity: 30 to 85% (no condensation) Dimensions: Approx. 346 (W) x 280 (H) x 424 (D) mm (13 5/8 x 11 1/8 x 16 3/4 inches) Mass: Approx. 17 kg (37 lb 8 oz) CRT CRT type: 14-inch HR Trinitron AG pitch: 0.25 mm Phosphor: EBU Effective picture size 4:3: 267.5 (W) x 200.6 (H) mm, 331.6 mm (diagonal) (10 5/8 x 8 inches, 13 1/8 inches) 16:9: 267.5 (W) x 150.5 (H) mm, 306.9 mm (diagonal) (10 5/8 x 6 inches, 12 1/8 inches) Resolution: 4:3: 800 TV lines, 16:9: 600 TV lines Aperture correction: OFF: 0 dB, ON: 2 to 6 dB Frequency response: LINE: 10.0 MHz +0 dB/-3 dB (Y signal only) RGB: 10.0 MHz +0 dB/-3 dB Synchronization: AFC time constant 1.0 ms Scanning frequency: 15.625 kHz (PAL, SECAM), 15.734 kHz (NTSC, NTSC4.43) Normal scan: 7% overscan Underscan: 5% underscan Linearity: Horizontal: less than 4% Vertical: less than 4% Convergence: Center: 0.4 mm (typical) Peripheral: 0.5 mm (typical) Raster size stability: Horizontal: 1% Vertical: 1% HV regulation: 3.5% Color temperature: D65, D93, User adjustable	Input/output LINE A Composite: Loop-through BNC, 1.0 Vp-p +3 dB/-6 dB, sync negative, automatic 75 . termination Y/C: Loop-through Mini Din 4-pin, automatic 75 . termination Y: 1.0 Vp-p, sync negative C: 0.3 Vp-p (PAL) or 0.286 Vp-p (NTSC) Audio: Phono, -5 dBu 47 k. or higher LINE B Composite: Loop-through BNC, 1.0 Vp-p +3 dB/-6 dB, sync negative, automatic 75 . termination Audio: Phono, -5 dBu 47 k. or higher RGB/Component: Loop-through BNC, automatic 75 . termination G/Y: 0.7 Vp-p +3 dB/-6 dB Sync on G: 0.3 Vp-p B/B-Y: 0.7 Vp-p +3 dB/-6 dB R/R-Y: 0.7 Vp-p +3 dB/-6 dB External sync: 4.0 Vp-p 6 dB, sync negative, usable tri-level sync signal 0.6 Vp-p 6 dB Option slot: x 1 Audio: Phono (x 2), -5 dBu 47 k. or higher Remote Parallel remote: Modular 8-pin (assignable) Serial remote: D-sub 9-pin (RS-485) Audio output: 0.8 W (distortion: less than 5%) Regulation compliance EN 60950, CE (LVD, EMC), C-Tick, CCIB The Y/C input has priority over the composite input.